Loading
Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹2.5 L
Closing Date
1 May 2025, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
DEN/C
25 conditions · 4 needing a document upload
No Technical and Financial credentials are required for tenders having value up to Rs 50 lakh
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) (v) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC April - 2022 [with up to date correction slip].
(a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Tenderer shall carefully read clause No. 10 including clause no. 10.1 to 10.5 of IRGCC April 2022.
The total value of similar nature of work completed during the qualifying period and not the payments received within qualifying period alone, shall be considered. In case, final Bill of similar nature of work has not been passed and final measurements have not been recorded, the paid amount including statutory deductions will be considered. If final measurements have been recorded and work has been completed with negative variation, then also the paid amount including statutory deductions will be considered. However, if final measurements have been recorded and work has been completed with positive variation but variation has not been sanctioned, original agreement value or last sanctioned agreement value whichever is lower shall be considered for judging eligibility.
In case JV firms are allowed to participate, Technical Eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.1 of J.V. guide lines of IRSGCC April-2022 [read with up to date correction slip].
The value of work completed will not include the cost of any materials issued free of cost by the Railway/ Department concerned. Price Variation amount, if any; if indicated / incorporated in the experience certificate will also be considered towards eligibility.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
The work experience certificate shall be in the name and style of the 1.5.1 tenderer participating or as per provisions under Clause 17.15 of GCC April-2022 for JV Firm, if eligible to participate.
The work experience certificate shall be issued by an officer not below the rank of JA Grade or Bill passing Officer in Railways and Bill passing Officer/Executive In-charge of work in other Govt. / Govt. bodies / PSUs. The certificate should bear the signature and seal of the issuing officer, name of the department etc. In case tenderer submits work experience 1.5.2 certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering work.
70 conditions · 6 needing a document upload
TENDER SHALL BE REJECTED if it is not accompanied by the following
Bid Security deposited through IREPS e-payment or as per provisions under Clause 5 (2) Part-I of GCC April 2022.
In case of Partnership firm: The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted 1.1.2 only in the name of the JV and not in the name of any constituent member.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender 1.1.3 documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90days beyond the bid validity period.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured:- i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered to the Divisional Railway Manager(Works),2nd floor, Irwin Road,South Western Railway, Mysore-570001, within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the 1.1.4 data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to the Divisional Railway Manager(Works),2nd floor, Irwin Road,South Western Railway, Mysore-570001 viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder. ix. The benificiary for the PG will be Senior Divisional Finance Manager, South Western Railway, Mysore
Uploading of Certificate in support of Technical Eligibility (No Technical credentials are required for tenders having advertised value up to Rs 50 lakh).
Submission of Certificate(s) in support of Financial Eligibility (No Financial credentials are required for tenders having advertised value up to Rs 50 lakh).
IN CASE THE TENDER is Partnership firm/ JOINT Venture firm (JV)/ LLP A copy of certificate to be submitted/uploaded by tenderer as per format given at annexure -v of IRGCC 2022.
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 20 CRORES: Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case tenderer is other than sole proprietorship firm, following documents shall be uploaded by the tenderer:
In case the Tenderer is a Partnership Firm: [i] A notarized copy of Partnership deed or a copy of the Partnership deed registered with the Registrar. [ii] A notarized or registered Power of Attorney (duly registered as per prevailing law) in favour of an 1.6.1 individual to sign the tender documents and create liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered). [iv] All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) A copy of LLP Agreement, (ii) A copy of Certificate of Incorporation; and (iii) A copy of Power of Attorney/Authorization issued by the LLP Firm in favour of the individual to sign the 1.6.2 tender on behalf of the LLP Firm and create liability against the Firm. (iv) Copy of PAN number of the LLP Firm. [v] All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
In case the Tenderer is a Company registered under Companies Act-2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of 1.6.3 Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company. and (v) All other documents in terms Para 10 of the Tender Form (Second Sheet) above
In case the Tenderer is a Registered Society & Registered Trust: (i) A copy of the Certificate of Registration. (ii) A copy of Memorandum of Association of Society/Trust Deed; (iii) A copy of Power of Attorney in favour of the individual to sign the tender 1.6.4 documents and create liability against the Society/Trust. And (iv) A copy of Rules and Regulations of the society (v) Copy of PAN number of the Society/Trust. (vi) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed: (i) A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a 1.7.1 Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted: (i) A notarized copy of the Partnership Deed or a copy of the partnership deed registered with the Registrar. (ii)A copy of consent of all the 1.7.2 partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper. (iii) A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted: (i) A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement. (ii) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company. 1.7.3 (iii) A copy of Certificate of Incorporation. (iv) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company
In case one or more members of the JV is/are LLP firm/s, the following documents shall be submitted: (i) A copy of LLP Agreement. (ii) A copy of Certificate of Incorporation of LLP. (iii) A copy of resolution passed by partners of LLP firm, permitting 1.7.4 the Firm to enter into a JV agreement. (iv) A copy of Authorization /copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP.
In case one or more members of the JV is/are Society/s or Trust/s, the following documents shall be submitted: (i) A copy of Certificate of Registration. (ii) A copy of Memorandum of 1.7.5 Association of Society/Trust Deed. (iii) A copy of Rules & Regulations of the Society. (iv) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.16 of Part-I of GCC April 2022. [in the format attached in - Documents]
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
Improvements to Kitchen, Toilet/Bath, Arresting of roof leakage and replacement of Old Doors and Windows in Type-II Quarters ( 46 Units) at TKE - 02 nos, BDVT - 10 nos and SMET - 34 nos in ADEN/SMET Sub-Division. SMET (69/A-B, 70/A-B, 71/A-B, 72/A-B, 74/AB-CD, 75/AB-CD,91/A-D,97,102/A-B,103/A-B,104/A-B, 106/CD, 107/AB, 108/AB, 108/CD,117/A-B,118/A-B,119A-B, 125AB) BDVT (40/A-B, 42/A-B, 44/A-B, 45/A-B,47/A-B) TKE (23/A-B)
08MYS25of09-04-25itno14
08MYS25of09-04-25itno14
Open
Works - General
12 Months
Dharwad, Karnataka
₹0
₹2.5 L
1 May 2025
9 Apr 2025
60 items across 1 schedule · ₹2,40,87,795.47 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 230 | 205.45 | 47,253.5 |
| 2 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 69 | 7,783.65 | 5,37,071.85 |
| 3 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 138 | 6,670.25 | 9,20,494.5 |
| 4 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 9.2 | 8,364.2 | 76,950.64 |
| 5 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 9.2 | 9,673.5 | 88,996.2 |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1150 | 1,063.45 | 12,22,967.5 |
| 7 | Kiln seasoned and chemically treated hollock wood | cum | 6.9 | 74,199.7 | 5,11,977.93 |
| 8 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 92 | 1,897.1 | 1,74,533.2 |
| 9 | 18 mm thick | Sqm | 184 | 869.1 | 1,59,914.4 |
| 10 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 276 | 1,881.95 | 5,19,418.2 |
| 11 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 276 | 401.4 | 1,10,786.4 |
| 12 | 75x47x1.70 mm | Each | 560 | 34.3 | 19,208 |
| 13 | 250x16 mm | Each | 250 | 165.9 | 41,475 |
| 14 | 200x10 mm | Each | 460 | 61.05 | 28,083 |
| 15 | 125 mm | Each | 250 | 35.2 | 8,800 |
| 16 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 460 | 702.6 | 3,23,196 |
| 17 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | Sqm | 184 | 3,963.7 | 7,29,320.8 |
| 18 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 3680 | 111.95 | 4,11,976 |
| 19 | Using M.S. angels 40x40x6 mm for diagonal braces | Sqm | 92 | 4,781.15 | 4,39,865.8 |
| 20 | Hot finished welded type tubes | Kg | 19550 | 154.9 | 30,28,295 |
| 21 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 1150 | 545 | 6,26,750 |
| 22 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 300 | 935.6 | 2,80,680 |
| 23 | Size of Tile 600x600 mm | Sqm | 1150 | 1,537.4 | 17,68,010 |
| 24 | 110 mm diameter | Metre | 690 | 319.75 | 2,20,627.5 |
| 25 | Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). | Sqm | 92 | 346.65 | 31,891.8 |
| 26 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 3910 | 671.55 | 26,25,760.5 |
| 27 | Ridges plain (500 - 600mm) | Metre | 690 | 450.6 | 3,10,914 |
| 28 | 1:6 (1 cement: 6 fine sand) | Sqm | 4600 | 282 | 12,97,200 |
| 29 | 1:3 (1 cement : 3 fine sand) | Sqm | 1380 | 253.05 | 3,49,209 |
| 30 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 7360 | 16.35 | 1,20,336 |
| 31 | One or more coats on old work | Sqm | 1380 | 86.55 | 1,19,439 |
| 32 | One or more coats on old work | Sqm | 7360 | 50.6 | 3,72,416 |
| 33 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. | Sqm | 3680 | 63.25 | 2,32,760 |
| 34 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | Litre | 46000 | 0.4 | 18,400 |
| 35 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm | Metre | 500 | 285.9 | 1,42,950 |
| 36 | 2mm (for corrugated roof sheets) | Sqm | 230 | 445.8 | 1,02,534 |
| 37 | 3 mm thick | Sqm | 100 | 534.1 | 53,410 |
| 38 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 138 | 2,007.1 | 2,76,979.8 |
| 39 | In cement mortar | cum | 92 | 1,698.45 | 1,56,257.4 |
| 40 | Of area 3 sq. metres and below | Each | 230 | 302.7 | 69,621 |
| 41 | For thickness of tiles 10 mm to 25 mm | Sqm | 1150 | 60.5 | 69,575 |
| 42 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 460 | 86.8 | 39,928 |
| 43 | Asbestos Cement sheet | Sqm | 150 | 63.75 | 9,562.5 |
| 44 | Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 92 | 173.15 | 15,929.8 |
| 45 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 4600 | 45.05 | 2,07,230 |
| 46 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 36 | 5,781.35 | 2,08,128.6 |
| 47 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 10 | 5,540.55 | 55,405.5 |
| 48 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 25 | 2,275 | 56,875 |
| 49 | 610x460 mm bowl depth 200 mm | Each | 46 | 3,337.85 | 1,53,541.1 |
| 50 | 20 mm nominal dia Pipes | Metre | 600 | 275.25 | 1,65,150 |
| 51 | 25 mm nominal dia Pipes | Metre | 320 | 370.65 | 1,18,608 |
| 52 | 50 mm nominal dia Pipes | Metre | 460 | 811.85 | 3,73,451 |
| 53 | 15 mm nominal bore | Each | 92 | 303.85 | 27,954.2 |
| 54 | 25 mm nominal bore | Each | 46 | 532.35 | 24,488.1 |
| 55 | 150 mm diameter | Metre | 460 | 591.4 | 2,72,044 |
| 56 | 200 mm diameter | Metre | 690 | 830.4 | 5,72,976 |
| 57 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 92 | 7,308.15 | 6,72,349.8 |
| 58 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Metre | 46 | 6,158.05 | 2,83,270.3 |
| 59 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 115 | 6,057.95 | 6,96,664.25 |
| 60 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 184 | 8,086.6 | 14,87,934.4 |
| Schedule total | ₹2,40,87,795.47 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022.pdf
ATTACHMENT
ACS-4toGCC-2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo5.pdf
ATTACHMENT
IRGCCApril2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo6.pdf
ATTACHMENT
GCCACSCORRECTION.pdf
ATTACHMENT
ACS-3toGCC-2022.pdf
ATTACHMENT
JPOforcablecut.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo9.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo7.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo8.pdf
ATTACHMENT
LocalcontentproformaforlessthanRs10crore.pdf
ATTACHMENT
LocalcontentproformaformorethanRs10crore.pdf
ATTACHMENT
Qrs.pdf
ATTACHMENT
Barchartqrs.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .