REPAIR /REPLACEMENT OF JOINERY ,PLUMBING, TILLING,SANITARY FITTING, STEEL GATE, ROLLING SHUTTER ETC IN DGQA AREA KANPUR OF AGE B/R -I UNDER GE(I) KANPUR.

Amount

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

S & F steel windows with side hung shutters with using 'Z' steel section without glazing bars including projected box type hinges, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters using seel section with glazing bars including projected box type hinge, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.

S & F steel ventilators with top hunh shutter & glazing bars hinges, steel peg stay complete all as specified and directed.

S&F framed work such as guard bars, grills etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

All as per item No-1 before but exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down shutter exc 1 Sqm and not exc 2.00 Sqm each complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and directed

M&L for 40 mm thick Flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed

S&F Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F Factory made solid PVC moulded door shutter 28 to 30 mm thick(stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specifications & drawings shown in section 8 of SSR Part II complete all as directed.

S&F MS work as in doors framing / chokhates for cladding, glazing and the like fixed with angle cleats connecting plates, etc conforming to (Fe-290) Gde E-165 complete all as specified and directed.

S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

M&L for 3 mm thick sheet glass ordinary quality and glazing withoil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed

Description all as per item No-14 before but figured glass,pin head type complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including destrub surfase of existing pogition complete all as specified and directed

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated steel surfaces complete all as specified and directed

S&F mild steel work as in bands , straps ,holdfast , hooks for hanging fans , and similar works confirming to Fe 290 , gde E-165 and complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 100 mm)complete all as specified and directed.

S&F PVC Butt hinges, (Size of hinges in 100 mm) complete all as specified and directed.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S & F mild steel sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc.

S&F in repairs aluminium alloy wire cloth, 0.45mm nominal dia or wire and average width if aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, wooden beads complete all as specified and directed.

Hacking out old broken glass( any thickness ,size ,quality or desceiption )form wooden frames or stone,cocrete or brick surrounds glazing with putty or fixed with beads

S&F rough cast wired figured glass 5 to 6.4 mm thick and glazing with oil putty /beads square exc 0.5 but n.exc 0.75 sqm all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with putty in square n.exc 0.5 sqm min each pan all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified

S &F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete for Fe-410- W(Gde- E-250) quality-B

M&L for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame /steel fram work including requred 6 mm thick teck wooden beading complete all as specified and directed.

S&F anodized aluminium door & frame 2mm thick incl- 5.00mm thick tinted glass in half portion and in other half portion 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and martice lock device complete with double keys for each lock, 01 No Floor spring for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 101.50x44.45mm (b) Aluminium style/top & middle rails of shutter = 83.5x44.45mm (c) Aluminium bottom rail of shutter = 114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed

Aluminium powder coated window/CSW (partially openable type ) with aluminium anodized frame of aluminium section 62.5x37x2.5 mm thick with shutters having styles & top rail of aluminium section 44.45 ,glazing clips,rubber packing ',aluminium snap beading ,screws anodized ,aluminium fitting such as hinges ,tower bolts handles etc including 5.5 mm thick ordinary plain glass complete .

S&F powder coated aluminium grill of mesh size 65mm x 75mm of 6mm dia of aluminium bar fixed with 'Y' or 'H' aluminium sec all as specified and directed.

Taking down and refixing of aluminium door of size exeeding 1.5 sqm and n exc. 3.00 sqm complete all as spd and directed

S&F in repair of aluminium door clip and rubber beading for fixing glass complete all as specified and directed

S&F in repair of 5.00mm thick tinted glass of aluminium door exeeding 0.5 sqm in each pane complete all as specified and directed.

S&F in repair for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame /steel fram all as specified and directed.

S&F in repair mild steel martice lock vertical type size 100 mm complete all as specified and directed

S&F in repair double action Floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governig pivot made of brass other parts made of mild steel heavy duty and fixedcomplete all as specified and directed

S&F in repair aluminium diecast body hydraulically regulated door closer designation NO- 3,universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as directed

S&F in repair 150 mm length floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor and complete all as specified and directed.

S&F factory made uPVC white colour casement (openable) window area exc 1.00 Sqm but not exc 2.00 Sqm made of extruded profiles with wall thickness of 2.3 mm (+ - 0.2mm) window profile with hollew section with multichamber ,frame (60mm X58 mm) sash (60 mm X 73 mm) T profile (one vertical length in between two shutters) (60 mm X 74 mm) glazing bead (35 mm X 20mm ) will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc making arrangement for fixing of hardware EPDM gasket 1.2 + - 0.2 mm thick galvanized steel frame (28mm X 21.5 mm ) sash (31mm X 27.5 mm ) T profile (27mm X 17 mm ) to be inserted in required profile, frame will be fixed to the wall with 8 mm X 100 mm long fasteners included casement handle made of zinc alloyed (white powder coated) transmission gear made of mild steel with multe point locking system all as spd and directed

S&F factory made uPVC white colour casement (openable) Door area exc 2.00 Sqm made of extruded profiles with wall thickness of 2.3 mm (+ - 0.2mm) window profile with hollew section with multichamber ,frame (60mm X58 mm) sash (60 mm X 78 mm) T profile (one vertical length in between two shutters) (60 mm X 74 mm) glazing bead (35 mm X 20mm ) will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc making arrangement for fixing of hardware EPDM gasket 1.2 + - 0.2 mm thick galvanized steel frame (28 mm X 21.5 mm ) sash (31 mm X 27 mm ) T profile (27mm X 17 mm ) to be inserted in required profile frame will be fixed to the wall with 8 mm X 100 mm long fasteners including casement door handle 150 mm long (white power coated ) corner striker . secondary strikers cylinder ,door transmission gear made of mild steel with multi point locking system with strikrs . 3D hinges of zinc alloyed (white powder coated ) all as spd and directed

S&F 5.00mm thick tinted glass exc 0.5 Sqm in each pane and complete all as specified and directed.

Taking down steel rolling shuttere including ball bearing,top cover anchoring road exc 3 Sqm but not exc 5 Sqm each complete all as specified and directed.

S & F steel rolling shutters, without ball bearings 1.00 mm thickness of lath including top cover, anchoring rod, hasp and staple and one shop coat primer, erected in position as indicated complete : push pull or manual type complete all as specified and directed.

S & F Ball bearing for rolling shutters complete all as specified and directed.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Demolition concrete in ground floors ans pavings n exc 15 cm thickness (below or above ground level) and complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded aggregate in pannels as in plinth protection and joints filling (with hot bitumin VG 10 and sand 1:3)complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar and complete all as specified and directed.

M&L for non skid ceramic colour tiles joint free 7 to 8 mm thick (Square /rectangle) area of each tile excedding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and ponted in white or coloured cement to match over 15 mm thick scread bed in cm 1:6 and complete all as specified and directed.

All as per item No-53 but on verticle surfaces such as skirting/dado over 10 mm thich rendering in cm 1:4 and complete all as specified and directed.

M&L for glazed ceramic coloured tile in vertical surface 450x300x7mm thick set in jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cm 1:4 and complete all as specified and directed.

M&L for vitrified dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes and complete all as specified and directed.

M&L for vitrified dark shade tiles on vertical surface 10 mm thick (square/ rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cm 1:4 complete all as specified and directed.

Demolation of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and complete all as specified and directed.

M & L 100 mm thick PCC type B-2, 1:2:4 (40mm graded aggregate) for flooring complete all as specified and directed.

Roughening of surface of old concret floor by picking sweeping clean and washing down with water to remove dust etc

M&L for 20-25 mm thick machine cut kota stone slab flooring over 20mm thick cement screed bed in CM 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete and complete all as specified and directed.

All as per Item No. 61 above but in skirting over 10mm thick rendring in CM 1:4 .

Taking down of old precast interlocking paver block any size and shape any description and in any position complete all as specified and directed..

M&L Plain cement concrete (1:4:8), type D-2, using 40mm graded stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed .

M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block with grey cement any shape and size confirming to IS 15658 -2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L in repair chequered cement concrete tiles 20 cmX20cm X25 mm thick set jointed and pointed in neat cement slurry in floors and complete all as specified and directed.

M&L screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes

Taking up or down 20 mm bore dia steel tubing and connections, including removal to store/ site complete all as specified and directed.

Taking up or down 15 mm bore dia steel tubing and connections, including removal to store/ site complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F tubes `medium grade' galvanised with all fittings and fixed complete to wall 20mm bore and complete all as specified and directed.

M&Lin repair gun metal ,globe or gate valve 20 mm with iron wheel head ,screwed both ends for iron pipe and complete all as specified and directed.

S & F in repair CP Bib taps fancy type cast copper alloy with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe ) complete all as specified and directed.

S & F in repair CP Stop valves fancy type ( angle valve) cast copper alloy screwed down high pre-ssure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed ( 15mm bore dia of pipe ) complete all as specified and directed.

S & F in repair 15mm bore dia Pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including brackets , waste pipe,complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks with cover & 20mm ball valves high pressure of PTMT with epooxy coated aluminium road & high density plastic ball (cylindrical vertical with closed top) hoisted and fixed in position incl disconecting of existing tank all as specified in SSR Part I (Capacity in litres 500) complete all as specified and directed.

Demolition of old existing unserviceable Indian type WC and S & F vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor with PCC, Lime concrete bedding.

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of capacity 10 litre ISI marked complete with inlet ball valve , and handle including bracket complete all as specified and directed.