NIT-78

Amount

Dismantling and taking down deffective high mast light fittings with complete assembly by engaging suitable heavy duty crane/ Hydra machine from pole upto 20 mtr height using electrically operated winch, repairing and refixing after replacing all unserviceable parts including internal wiring complete all as specified and directed by Engineer-in-Charge. (Note : (a) Light fittings shall be measured and paid for separately. (b) Spares such as steel wire, winch motor, cable etc shall be measured and paid for separately. c) The entire work shall be carried out by well experienced professionals who has already carried out the high mast poles dismantling /repair works and similar works. d) Cost Minor fittings/fixtures such as screws, bolt/nuts, grease etc shall provided by the contractor without any extra cost to the Govt to make fucntional lights and nothing shall be admissible on this ground.

Supply only stainless steel rope twisted of size 10 mm dia with necessary connections proper binding on both sides from bottom drum to high mast top connection hook , complete all as specified and directed by Engineer-in-Charge.

Supply only fractional 1.5 HP motor 415 volts suitable for electrically operated high mast light, complete all as specified and directed by Engineer-in-Charge.

Supply only PVC insulated, PVC sheathed multistranded copper conductor cable of size 4.00 sqmm 4 core , complete all as specified and directed by Engineer-in-Charge.

Supply only Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting along with connected accessories complete all as specified and directed Make :- Havells Cat Part No JETAIRISFLS 150WLED757PSYMLTG/Crompton Cat Part No LFLN-150-CDL/60 or Equivalent in Philips.

Supply only Integral LED aviation light fittings Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure Make : Bajaj Cat Part No BGAV 302 LED or equivalent in Crompton/ Havells/Philips

Disconnecting and taking down the existing perimeter light fittings from poles of any type or any make for cleaning by removing the dusts, insects from the inside of compartment, repair/replacement of unsv spares and re- fixing the same complete all on the directed by Engr-in-Charge Note - Spare parts will be measured and paid for seperately.

Supply only electronic LED driver for LED light fittings, capacity 45/ 50 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton Greaves/ Bajaj/ Wipro/ Phillips/ Surya/ Bajaj/ C&S.

Supply only electronic LED driver for LED light fittings, capacity 60 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton Greaves/ Bajaj/ Wipro/ Phillips/ Surya/ Bajaj/ C&S.

Supply only LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in surge protection device, including LED lamps of 60 Watt all as specified and as directed by Engr-in-Charge Make: Havells cat part No- Endura Pearl Plus SL60WLED757SASYTOPC/ Philips ordering code No- 910925865969 (Product Code- 871869632029700)/ Wipro cat part No- LR02-671-XXX-57-G2.

Supply and fixing in repalcement bracket made out of GI pipe 1.5 Mtr long, 40 mm dia light grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for PCC poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed.

Disconnecting and taking down the existing unserviceable post top lantern/ gate/ garden light fittings from gates/ poles of any type or any make for cleaning by removing the dusts, insects from the inside of compartment, repair/replacement of unsv spares and re- fixing the same complete all on the directed by Engr-in-Charge Note - (a) Spare parts will be measured and paid for seperately. (b) Necessary dismantling and new PCC work /touch up work if required to make existing surface as existing etc shall deemed to be included in the quoted rates.

Supply only LED Bollard light fittings 10 W IP65 protection with robust design and efficient light distribution, complete all as specified and directed by Engineer-in-Charge. Make : Crompton cat No LBLTW-10-CDL or equivalent in Osram/Havells/Philips

Supply only pole mounted LED Post Top lantern ideal to lit up parks, garden ways and heritage sites and efficient light distribution with IP65 protection of capacity 20 watt mounted on existing Pipe 40/50 mm dia all as directed Make : Crompton cat No LPTH-20-CDLor equivalent in Osram/Havells/Philips

Supply only gate light LED post top 15 watt , new generation, energy saving long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs Ruby clear suitable for mounting on existing Brick pillar gates/ poles on existing pipe of 40/50 mm dia all as directed Make : Havells Cat No RUBYMINIPT15WLED757PSYMTOPC or equivalent in Crompton/ Philips

Supply only GI pipe light grade of size 40 mm dia of any height mounted on PCC fdn at existing position all as directed by Engr-in-Charge Note: (PCC measured and paid separately)

Supply only GI pipe light grade of size 50 mm dia of any height mounted on PCC fdn at existing position all as directed by Engr-in-Charge Note: (PCC measured and paid separately)

Taking down existing solar street light fittings with solar panel from poles, cleaning the solar panel, removing burnt/ damage sensor, battery and auto system from battery box, repair the wiring with copper wire of suitable size including replacement of spares all as directed (Spares parts will be measured and paid separately

Supply only Solar plate of capacity 200 watt in suitable size as per existing panel, complete all on the directed by Engr-in-Charge

Supply only LMLA battery, 12 Volts 60 AH with end terminal of suitable size, complete all on the directed by Engr-in-Charge

Supply only automatic time sensor including internal connection cable of suitable size, complete all on the directed by Engr-in-Charge

Replacement of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 10 Sq mm, 4 core all as directed

Replacement of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 10 Sq mm, 2 core all as directed

Replacement of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 6 Sq mm, 2 core all as directed

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable,erection of poles, stays, pipes etc and not exceeding 10sqm on plan and getting out all as directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as specified.

Removal of excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above in starting point.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed by Engineer-In-Charge. Note: Punned thickness shall be measured.

Sub class ‘B’ bricks, modular size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning for mechanical protection of cable, with width equal to the length of the brick, complete all as specified and directed by Engineer-In-Charge.

M&L PCC 1:4:8 type D-2 using 40 mm graded aggrgate for filling in foundations of LT poles/garden light fittings all as directed.

Replacement of PVC junction box of size 140MMx140MMx95MM mounted on GI pipe with MS clamp made out of 40 mm x 6 mm flat for fixing box on pole/wall including terminal point mounted on epoxy insulator for cable connection with 01 No MCB SP 10 amps complete all as directed

Replacement of automatic timer switch astronomical type of capacity 32 amps 230 volts suitable for controlling of light fittings all as directed by Engr-in-Charge. Make : Indoasian cat No TL032ASO or equivalent of Bajaj

Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 4.0mm dia GI wire as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 20mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.

Disconnecting all electric connections from alternator and fuel connection from engine, decoupling of engine and alternator, strip opening of diesel driven generator of capacity 30 KVA for repair, complete for carrying out overhauling after de-assembling the engine assembly, cleaning/washing the engine block and other spares parts replacement defective parts with new spare parts as required for smooth functioning of diesel engine and strip opening of alternator for repair and replacement of old defective spare parts, metalling, welding, grinding, lathe machine work required at workshop including re-assembling the engine in existing position or a location as directed complete and testing on load all as specified and as directed by Engr-in-Charge. Note : (a) New spare parts will be measured and paid separately as supply only under the respective items. (b) Cost of cleaning, welding, minor repair and special tools and plants required for dismantling engine will deemed to be included in quoted rate. (c) Transportation cost of diesel engine/ alternator to workshop and return back shall deemed included in quoted rate.

Supply only following new spare parts required for DG set and alternator of capacity 30 KVA (a) Linear piston Ring set

(b) Valve guide set

(c) Main Le Bearing

(d) Big end Bearing set

(e) Engine packing kit

(g) Engine oil

(h) Diesel filter

(j) Lub Oil filter

(k) Oil pump set complete

(l) Oil seal set

(m) Head gasket

(n) Fan belt

(o) Thrust washer set

(p) Self starter assy

(q) Connecting rod bush

(r) Charging alternator

(s) Hose pipe set

(t) ignation switch

(u) Volt meter

(v) ammeter

(w) Coolant fluid suitable for radiator of DG set

Amount of Schedule of credit of for Rs 1,45,705.00 shall be deducted from quoted amount.

MAMTA ENTERPRISES

Usha Engineering Co.