A/M TO L/S WORK OF GOVT. NURSERY SEC-16-A FARIDABAD CONSTRUCTION OF 5-11-1/2 HIGH BOUNDARY WALL

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(HSR 4.14.1)

Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).(Depth exceeding 3 m but not exceeding 4.5 m(HSR 4.22.3)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:(HSR 6.1)(1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size)(HSR 6.1.6)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: (HSR 7.20.1)

Providing and laying damp-proof course with cement concrete 1: 1.5:3 (1 cement : 1.5 coarse sand (zone-Ill): 3 graded stone aggregate 20mm nominal size)(HSR 6.9)40 mm thick(HSR 6.9.2)

Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in (HSR7.22)Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR 7.22.1)

Providing and laying Cement concrete flooring 1: 2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.25 mm thick with 12 mm nominal size stone aggregate (HSR 10.10.2)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1 :6 (1 cement: 6 fine sand) (HSR 11.6.2)

Striking Joints in Cement on Brick and tile walls (NS)

White washing with lime to give an even shade11.61.1 New work (three or more coats) (HSR 11.61.1)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.(HSR 11.78)

The Gaur Co-Operative Multi Purpose Society Ltd.