Construction of RCC Building Along with site development works such as Compound wall ,UG sump and Street lights for Prototyping, Testing Center Lab ,Innovation hub In Medical Device Park at SIPCOT Oragadam.

Amount

PART-A Prototyping,Testing And Innovation Hub

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOTofficers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. and as directed by the SIPCOT Officer Earth work excavation for foundation in all soils and sub soil

upto 2m Depth

2m to 3m Depth

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, Without consolidation etc. complete complying with standard specification and as directed by the SIPCOT Officer

Plain Cement concrete 1:4:8 (one cement, five sand and ten aggregate) 15cm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification and as directed by the SIPCOT Officer

Supplying and filling in foundation, basement, etc with Sand Gravel mix in ratio of 1:1 in layers of not more than 15 cm thick thoroughly mixed, well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT Officer

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. and as directed by the SIPCOT Officer (Payment for centering shall be given after the concrete is laid) (Side Shuttering)

SQUARE COLUMN

VERTICAL SURFACE

ReinforcedCement Concrete M 35 Design Mix using ordinary portland cement with water cement ratio not exceeding 0.45 including plasticizer etc for RCC works in foundation 20mm gauge down graded hard broken stone jelly excluding the cost and fabriation of reinforcement grills, shuttering and centering but including vibrating, laying, curing, finishing etc., complyibng with relevant standard specifications and as directed by the SIPCOT Officer

Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels for reinforcement Fe500 HYSD for all floors including cost of steel, binding wire, bending, tying etc, all complete complying with relevant standard specification and as directed by the SIPCOT Officer

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. and as directed by the SIPCOT Officer (Payment for centering shall be given after the concrete is laid)

FOR SQUARE COLUMN[GF-HEAD ROOM]

FOR VERTICAL SURFACE OF SLAB, STAIRCASE OHT AND LINTEL

For Plane Surface Such as retangular or Sqaure Columns,Sunshades , Top and Bottom slab of RCC boxing , etc

Double height Shuttering

Reinforced Cement Concrete M 35 Design Mix using ordinary portland cement with water cement ratio not exceeding 0.45 including plasticizer etc for RCC works in super structure 20mm gauge down graded hard broken stone jelly excluding the cost and fabriation of reinforcement grills, shuttering and centering but including vibrating, laying, curing, finishing etc., complyibng with relevant standard specifications and as directed by the SIPCOT Officer in the following floors.

Ground Floor

First Floor

Second Floor

Third Floor

Head Room

Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels for reinforcement Fe500 HYSD for all floors including cost of steel, binding wire, bending, tying etc, all complete complying with relevant standard specification and as directed by the SIPCOT Officer

POST TENSIONING WORKS : Design and Execution, of post tensioning works, including, decoiling the strands, cutting to the required lengths, supplying laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers, and inserting the strands, profiling, fixing live end anchorages, including the supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of anti-bursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures , with required tools, plants, and machineries, and consumables etc. (shuttering, concreting & reinforcement steel, shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post-tensioning agency,preparation of drawings, obtaining approval from the Employer /Architect etc. Rate to include providing water, power, cement and admixture for grouting, packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts(cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer /Architect but excluding shuttering, concreting & reinforcement steel which shall be payable under respective items separately.

Brick work in cm 1:3 (one of cement and four of Msand) using chamber burnt second class ground moulded stock bricks of size 9”x4-3/8”x2-3/4” (23x11.2x7cm) for stair case steps including proper setting, scaffolding, curing etc., complete in all respects in all floors and as directed by the SIPCOTofficers

Ground Floor

First Floor

Second Floor

Third Floor

terrace & Head Room

Providing and fixing Frameless Glass Partitions with 12mmClear Toughened glass for maximum height of 3400mm.Glass shall be supported at top and bottom with aluminium'U'Channel of size: 25x40mm and suitable PVC/rubber wedges.Channel to be fixed at bottom into groove cut in flooring with Fischer Hammer fix fastners.Channel at top to fixed into support frame using aluminium box section of size:100x45x2mm using clamps,anchor bolts and Fischer Hammer fix fastners.Weather sea lent to be applied between channel and glass and between glass joints to form complete glass partition.etc. complete complying with standard specification and as directed by the SIPCOT Officer

Providing & Fixing of EPD - Semi Automatic consisting of 100mm thick individually movable elements with sound insulation upto 50dB tested in a third party labopratory as per EN Standards, suspended from a top track only, without floor guides. Each panel to have top and bottom operable pressure seals operated by The spindle mechanism should be operated driven by a 24V DC electric motor to ensure optimum contact pressure of up to 800N.The elements must be inter-connected by means of a positive locking concave/convex trapezoidal aluminium profile integrated with Magnetic Profile. The frame must be clad either side with 16mm MDF panels hung in acoustic isolation from the frame and allowed to vibrate independently of the frame.removable without requiring to dismantle the movable wall elementservice/maintenance purpose. The panel must be filled with high density rock wool and sound mats in accordance with the specified sound insulation requirementt must open and close 120mm and must be operated by a single mechanism for both the top and bottom seals and the travel of the telescopic sleeve .The telescopic element must maintain all the same quality criteria as the other elements.The Acoustic Movable Wall partition should be have test certificate produced by a third party carried out in the test laboratory, accredited to DAP. The weighted sound reduction index Rw (dB) is determined in accordance with .etc, all complete complying with relevant standard specification and as directed by the SIPCOT Officer

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT Officer (Interior Plastering)

Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT Officer (Exterior Plastering)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by SIPCOT officers

Supply and installation of GRG Core Ceiling (or) Equivalent Brand of Acoustical False Ceiling of Tiles of size 595 x 595 x 15mm having volume density 270 kgss / m3, weight 4kgs / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module ncludes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of f 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is nterlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15.Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. GRG Core Ceiling of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the SIPCOT offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard specication .and as directed by SIPCOT officers

Supplying and erecting of pull and push type manually operated Rolling Shutter of approved size and section using 18 guage G.I. Sheet confirming to ISI standard with Hood covers including one coat of approved primer transport charges etc. complete in all respects, complying with relevant standard specifications and as directed by the SIPCOT officers (The Model/Brand of the Rolling shutter has to be got approved by the SIPCOT Officer before fixing).

Providing & Fixing of Frameless partition with door glazing consisting of 12mm clear toughened glass (Saint Gobin or equivalent) and fixing with single leg spider , ceiling /bottom to glass connector , glass to glass connector , handle , door set ,floor spring , pivot etc. and all the necessary fittings upto all height including Scaffolding and labour all complete as directed by SIPCOT Officer

Supplying and fixing of solid PVC door shutters using 19 gauge 19mm MS sq.tubes for styles and outer frames. 15mm MS sq. tubes for top,lock and bottom rails the steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fitting. The overall styles shall be 50x30mm.The overall size of top rail, lock rail and bottom rail shall be 75mmx30mm.The overall size of frames shall be 50x45mm,with suitable rebate for housing the shutters. including labour charges for fixing the shutter frame, shutter and furniture fittings in position and finished smooth with template etc., all complete as directed by the SIPCOT Officer (Fittings provided shall bear ISI mark . The quality and brand of door shutter and furniture fittings should be got approved by the SIPCOT officer before use)

Supplying and fixing of Aluminium Door Stopper with Rubber Bush with required screws etc., complete complying with standard specification and as direted by the SIPCOT officers

Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1200mm x 1400mm with following specification:a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW c. Shutter Thickness: 46mm d. Honeycomb: In-fill e. Glue Macroplast UR-7221 f. Door Hinges: 4" x 3" x 3mm, Double Ball: Make Assa Abloy Yale Ball bearing Butt Hinges Grade SS 304 - Finish SSg. Door Closer with Standard Arm Finish: Silverh. Lock Set: Dead Lock with both side keyi. Door Orientation: To be confirmed by client j. Mounting of door: Brick wall mounted k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns l. Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalentn. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frameo. Rated Glass Schott Pyran with Frame p. Anchor Bolt with EndcapsThe above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, plastering, scaffolding all other conveyence as per standard methods and as directed by the SIPCOT Officer

Supply &fixing Mild steel grill of approved. design The cost including of necessary screws, plugs, one coat of red oxide primier of approved quality, labour charges for fixing etc all complete and as directed by the SIPCOTofficers

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPCOTOfficer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOTOfficer before use on work

Providing and fixing of Aluminium Dye cast letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for in the following sizeand as directed by SIPCOT officers.

Aluminium Dye Cast letters 9" Size

Aluminium Dye Cast letters 2' Size

Providing Vaccum Dewatering concrete Flooring (VDF) with Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) , etc., complete complying with standard specification and as directed by the SIPCOT officers

Supplying and Laying of Self-leveling epoxy floor for 7 mm thick: a) Surface Preparation:By any one of the suitable methods based on site conditions /availability. b) Primer Coat: Over the cleaned surface apply one coat of solvent less epoxyPrimer for a thickness of 100 to 150 microns for bonding epoxy flooring toConcrete surface. c) Epoxy underlay/screed (5.0 mm): Over the primed surface apply EpoxyMortar underlay to a thickness of 5 mm to cover the undulation orIrregularities in the floor to make it uniform. d) Primer Seal Coats (0.5 mm): Over the screed two coats of epoxy primer sealCoat to seal off the pores in the screed and also to act as an intermediate coatBetween screed & topcoat. e) Self leveling epoxy floor topping 1.5 mm): Over the Seal coats, applicationof around 1.5 mm thick three component epoxy-self leveling colored floorWith smooth and glossyfinish.(choice of colour-as specified by Engineer in charge) etc., complete complying with standard specification and as directed by the SIPCOT officers

Paving the floor with best quality stain free double changer vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by SIPCOT officer before use on works)

Flooring with Anti skid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mmceramic tiles laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 kgs. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by SIPCOT officer before use on works)

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the SIPCOT concerned before use on work, etc., complete as per standard speicification. and as directed by the SIPCOT Officer

providing 'Fine Polished Granite Slab Front Edge Nosing for Granite Slab etc., complete as per standard speicification. and as directed by the SIPCOT Officer

Dadooing walls with following best approved quality, white colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kgs. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the SIPCOT Officer (Tile Size - 150mm X150mmX6mm)

Weathering course with broken brick jelly lime concrete using 20mm gauge broken brick jelly in pure slaked lime ( no sand) over roof slab to the proportion of brick jelly to lime ( Fat lime) being 32: 12 1/2 by volume well beaten with wooden beaters, for giving the required slope and thickness complying with relevant standard specification and as directed by the SIPCOT Officer

Finishing the top of roof with one course of Anti skid / Non Salippery Solar Reflectance index weather proof cool tiles of size 305mmx305mmx7mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the SIPCOTofficers

Providing Polymer coating (Water Proof coating) for sunken portion of toilet with following specification and the surface shal be cleaned to remove all dust,foreign,matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry : Dry blend and polymer liquid shall be mixed into desired ratio as per recommandation of the supplier.The mix shall be stirred thoroughly until no bubbles remain in the mix.any lumps found in mix shall be removed.Apply first coat of polymer modified cementitious slurry by brush on wet cleanes surface.After drying,second coat shall be applied on the first coat as directed by the SIPCOTofficers etc,The rate inclusive of cost of materials and labour,etc complete complying with standard specication and as directed by the SIPCOTofficers

Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. and as directed by the SIPCOTofficers

Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOTofficers

Painting new iron work with two coats of approved I st class synthetic ready mixed enamel paint of approved quality, brand and shade over the existing priming coat. The paint should be supplied by the contractor at his own cost. (The quality and shade of the paint should be got approved from the SIPCOT before use on works) etc. all complete complying with relevant standard specifications and as directed by the SIPCOTofficers

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete and as directed by the SIPCOTofficers

Supply & Installation of Wood Plastic Composite (WPC) Post of Size 150 x 150 mm MS box section insert 980x80x6mm) coated with hot dip galvanization as per ISO 1461, to be anchored to the floor and celing through a base plate\ wall bracket of size 200mmx200mmx6mm with four numbers of 12mm dia bolts fixed with epoxy grout with necessary mechanical expansion anchors with necessary fixtures, including scaffoldind charges all complete complying with relevent standard specifications and as directed by the SIPCOT officers

Providing and fixing structural Glazing Fabricated from roll framed sections made of galvanised steel color coated (base steel as per IS 513 of 'D' Quality galvanized as per IS 277 with Zinc of 120 grams / Sqm) with total coated thickness of 0.72mm.The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel /powder coated sections as per the design requirement. Primer coat with epoxy primer of 5 -7 microns thick,finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions : The section should be of 37x53 mm for frame vertical , 37x53 mm for frame horizontal section and section for forcement should be of 37x37 mm for top bottom grids in between should be x18mm... Accessories : Brackets made of CRCA powder coate/ electro plated should be used to fix vertical at top and bottom and vertical to slab as per olyurethane brackets should be used to connect horizontal section to vertical sections. Silicone : Natural cure, with good UV resistance to be used. The above frame should be fixed to brick / concrete masonry by using nylon self - expanding cap and driving MS electro plated 80mm long screws into the caps through frames.Glass: 5mm reflective Saint Gobain OR equivalent etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and Fixing of outdoor LED Digital Display with module size of 500x250mm with pixel pitch (mm) of 3.91 with unit weight of module with cabinet less than 25 Kg/sq.m, module resolution 64x128, physical pixel density not less than 65000 pixels/sq.m having the flatness of cabinet +/-0.3mm, minimum brightness of 5000 (after calibration), colour temperature of 3500 to 9000 having visual viewing angle of 160 (horizontal) and 136 (vertical), contrast ratio of 6000, maximum power consumption of 650W per aluminium cabinet (2x4 modules) or 650 W/Sq.m, power supply 100 to 240 V with frame rate of 50/60 Hz and refresh rate of 3840 Hz. Lifetime of 100000 hrs to half brightness with waterproof IP rating Front/Rear of IP65 with all the necessary fixing arrangement on the outside wall.etc., complete complying with standard specification and as directed by SIPCOTofficers

PART-B Water Supply Arrangement

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by SIPCOT before use on works. and as directed by SIPCOT Officers.

40mm PVC - 10kg/cm2 Pipes

25 mm PVC - 10kg/cm2 Pipes

20mm PVC - 10kg/cm2 Pipes

Supplying and fixing the following dia PVC (SWR) pipe type B class conforming to IS 13592and relevant specials including packing the joints with rubber lubricant fixing them into walls with necessary GI Bolts and Nuts with special clamp made of MS angle/Flat including cutting, bending (excluding the cost of MS angle/flat) holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete complying with relevant standard specification and as directed by the SIPCOTofficer

Soil Pipe - (110mm Pipe 6kg/cm2)

Soil Pipe - (160mm Pipe 6kg/cm2)

Wastewater Pipe - (75mm Pipe 6kg/cm2)

Wastewater Pipe - (110mm Pipe 6kg/cm2)

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. cand as directed by SIPCOT Officers..

110 mm dia PVC- 4 kg/cm2 pipes

Supply and fixing of GM Gate Valve 40mm Dia heavy type with necessary flanges, gaskets, nuts and bolts complete as required and shall be compatable with Composite pipes as applicable.etc., complete complying with relevant standard specification and as directed by the SIPCOTofficer. The quality and brand Gate Valves is to be got approved by the SIPCOT officer before fixing.

Supplying and fixing of C.P 2 way Bip cock Short body with wall flange like ESSCO, Jaquar fitiing including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT Officer, (The quality and brand of fittings should be check before use).

supplyand fixing in position 15mm dia brass cp screw down tap/ piller tap(heavy duty) of approved make conforming of BIS specifications and quality including cost of shellac threadetc.complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be get approved by the SIPCOT before use of the work)

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT Officer (The urinal should be got approved by the SIPCOTOfficer before use on works.)

Supply & fixing of PVC Prelaminated Board of 12-18mm thick for Toilet Partition etc complete complying with standard specification and as directed by the SIPCOT Officer

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittingssuch as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOTofficer before use on works)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer (The wash hand basin and specials should be got approved by the SIPCOTofficers before use on works).

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOTofficers before use on works) (Cast Iron Nahani Trap of size 100 x 75mm with stainless steel gratings)

Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in SFRC cover slab of size 300 x 300mm over using 40mm size brick jelly and brick masonry wall 115 mm thick using fly ash bricks of size 23x11x7cm in cm 1:5 (One of cement and five of sand ) plastered with CM 1:3 (One of cement and three of sand) 12mm thick Including fixing cover slab fixing in position curing finishing etc., All complete complying with relevant standard specification and as directed by the SIPCOTofficer.

Construction of Inspection chamber of following sizes with brick jelly concrete 1:8:16 ( one of cement eight of sand and sixteen of broken brick jelly using 40mm gauge broken brickjelly 15cm thick for foundation and 23cm thick brick masonry in C.M. 1:5 ( One of cement and five of sand) using fly ash bricks of size 230mm x110mm x70mm, plastering with cement mortar 1:3 ( One of cement and three of sand) 12mm thick on both sides top and bottom including earth work excavation RCC 1:2:4 ( One of cement two of sand and four of 20mm gauge hard broken stone) Including SFRC Cover Heavy duty collor with slab of required size fixing in position curing finishing etc., complete complying with relevant standard specification and as directed by the SIPCOTofficer. (Inspection 0.60x0.60m (inside opening))

Inspection Chambers (0.60x0.60x0.60)

Inspection Chambers (0.60x0.60x1.25)

Supply and fixing 5HP summersible pump set asper isi specification with isi mark hydurallically testing and commisioning of submersible wet type suitable for sump with pressure gauge and necessary length of 2 nos of pp from pumpset to the top of the sump and other required accessories etc complete in all respect and as directed by the SIPCOTofficers, the motor and the pumpset supplied should satisfied the following duty conditions etc complete complying with standard specification and as directed by the SIPCOT Officer

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4kg./sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications and as directed by SIPCOT officers (The PVC cowl should be got approved by the SIPCOT before use on works).

Supplying and fixing of PVC / Fibre Glass Framed 5.5 mm thick Mirror, Shelf Type with Hard Board Backing of size 1200x450mm including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT Officer, (The quality of fittings should be got approved from SIPCOT officer before use).

Supplying and fixing of Anodised Aluminium Towel Rail 60cm long and 20mm dia with Brackets including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT Officer, (The quality of fittings should be got approved from SIPCOT officer before use).

Supplying and fixing of Stainless Steel Sink of size 1200x600x200 mm complete complying with standard specification and (The wash hand basin and specials should be got approved by the SIPCOT officer before use on works) as direcetd by SIPCOT Officers.

PART-C ELECTRICAL SUPPLY & ARRANGEMENT

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & office, etc.) and as directed by SIPCOT Officers.-

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour t and as directed by SIPCOT Officers.-

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour and as directed by SIPCOT Officers.-

SUPPLY, DELIVERY AND FIXING OF MODULAR SWITCHES & SOCKETS etc., complete complying with standard specification and as directed by SIPCOTofficers

6A Switch 1W - 1 Module

16A Switch 1W - 1 Module

Stepped Electronic 300W / 450W Square Type FanRegulator

6/16A Socket - 2 Module

6A 5 pin Universal Socket - 2 Module

SUPPLY, DELIVERY AND FIXING OF FLUSH MOUNTING BOXES (GI) etc., complete complying with standard specification and as directed by SIPCOTofficers

Flush Box - 1/2 Module

Flush Box - 3 Module

Flush Box - 4 Module

Flush Box - 6 Module

Flush Box - 8 Module

SUPPLY, DELIVERY AND FIXING OF COMBINED PLATES (PLASTIC) etc., complete complying with standard specification and as directed by SIPCOTofficers

1 Module Cover Plate

2 Module Cover Plate

3 Module Cover Plate

4 Module Cover Plate

6 Module Cover Plate

8 Module Cover Plate

Supply and fixing of 24A flush type wall socket with 25A DP MCB for AC Plug etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and fixing of 18W LED 4000K round type Recessed Fitting with LED etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and fixing of 24W LED 4000K 2x2 Square type Recessed Fitting with LED etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp etc., complete and as directed by SIPCOT Officers.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc., complete and as directed by SIPCOT Officers.

Supply and fixing of 7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTION BOARD WITH MCB6 way TPMCB sheet steeldistribution boards flush type / surface type fitted withbus bars and neutral links with single / three phase MCB outgoings and separate6 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 6 ways in each segment) and separate provisions for MCB / Isolator (totally 18 Nos.) for sub incomers in 3 segments with label holder and provisions for taking up cable for size not less than 35 sq.mm.etc., complete complying with standard specification and as directed by SIPCOTofficers

SUPPLY, DELIVERYAND FIXING OF MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTORCIRCUITSetc., complete complying with standard specification and as directed by SIPCOTofficers

Single Pole 6A to 32A, 10KA

Triple Pole & Neutral 63A, 10KA

40 Amps 30 MA DP

Vertical TPN Distribution Boards (with MCCB Incomer); Double Door; IP43, as per IS 8623 III; Impact resistance IK09; Frame MCCB Incomer & Single Phase/Three Phase MCBs as Outgoing (for power loads exceeding 100A) 8 Way, MCCB + 24 Modules

SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 8 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single phase MCB outgoings and separate 2 way provision for accommodating One No. 2 pole incoming MCB / Isolator and another separate 2 way provision for accommodating One No. 2 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm.

125A TP MCCB

Earthing

Earthing as per ISI specification with an earth elctrode of 210 m class "B" GI Pipe of dia not less than 40 mm with copper earth plate of size 125 mm x 50 mm x 6 mm with necessary funneling arrangements with necesssary masonry work and with 48 mm RCC cover slab for the brick masonry with appropriate specification / standards and as directed by SIPCOT Officers.

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5 metre etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and run of 50mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and laying of 3-1/2 x300 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete and as directed by SIPCOT Officers.

Supply and laying of 3-1/2 x120 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete and as directed by SIPCOT Officers.

Supply and laying of 3-1/2 x95 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete and as directed by SIPCOT Officers.

Supply and laying of 3-1/2 x 25 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete and as directed by SIPCOT Officers.

Supply and laying of 4C x 10 sq.mm.PVC LTUG Aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete and as directed by SIPCOT Officers.

Supply and laying of 4C x 16 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete and as directed by SIPCOT Officers.

Supply and laying of 4 x 6 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the EARTH TO MAKE GOOD etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and fixing of brass cable gland for 3-1/2 x 300 sq.mm. PVC LTUG aluminium armoured cable with earth connectionetc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and providing cable end termination of 3-1/2 x 300sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete and as directed by SIPCOTofficers

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and providing cable end termination of 3-1/2 x 120sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete and as directed by SIPCOT Officers.

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and providing cable end termination of 3-1/2 x 95sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete and as directed by SIPCOTofficers

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete and as directed by SIPCOTofficers

Supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete and as directed by SIPCOTofficers

Supply and fixing of brass cable gland for 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete and as directed by SIPCOTofficers

Supply and fixing of brass cable gland for 4 x 6 sq.mm. PVC LTUG aluminium armoured cable with earth connection etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and providing cable end termination of 4 x 6 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete and as directed by SIPCOTofficers

SUPPLY,DELIVERY AND FIXING OF CABLE TRAY etc., complete complying with standard specification and as directed by SIPCOTofficers

GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height

GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height

GI Hot Dip / Powder Coated 16 SWG Cable Tray with 450mm width and 50mm height

Fabrication of MS Angle Support

SUPPLY,DELIVERY AND FIXING OF 11 KV OUTDOOR RING MAIN GEAR (RMG) etc., complete complying with standard specification and as directed by SIPCOTofficers

11 KV, 25 KA, 630 A, HT Outdoor Three Panel Ring Main Gear complete as per specification

SUPPLY,DELIVERY AND FIXING OF 11 KV OUTDOOR VACCUM CIRCUIT BREAKER etc., complete complying with standard specification and as directed by SIPCOTofficers

11 KV, 25 KA, 630 A, HT Outdoor Single Panel Vaccum Circuit Breaker complete as per specification

SUPPLY,DELIVERY AND LAYING OF HT CABLES etc., complete complying with standard specification and as directed by SIPCOTofficers

300 sq.mm. 3 core HT XLPE 11KV (E) SISMV11E3 x 3002797

SUPPLY, DELIVERYAND LAYING OF CABLES, ACCESSORIES AND KITS etc., complete complying with standard specification and as directed by SIPCOTofficers

240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121

22KV/433V 630KVA Outdoor Oil Type Transformer With OLTC Details : (Market rate) 11kV /433V 630kVA, Dyn11, Three phase, ONAN,,Transformerwith +10% to -10% voltage variation in steps of 2.5% through On Load Tap changer, control by RTCC panel. Impedance 5% ,Termination,Incoming (Excluding cable termination kits, lugs andglands) Bottom,Outgoing (Excluding cable termination kits, lugs andglands) Bottom

SUPPLY,DELIVERY AND FIXING OF LIGHTNING ROD

Supply of Early Streamer Emission Air Terminal (ESEAT).Model: S The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere.The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required ), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 µs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request ESEAT Model : S - Radius of protection : 46 Metres Level of protection considered for the Project-II level etc., complete complying with standard specification and as directed by SIPCOTofficers

MAIN MV PANEL

CABLE ENTRY: BOTTOM/TOP

Incomer 3:400 Amps TPN MCCB of 35kA(Ics) withstanding capacity with Adjustable Overload, Fixed Short Circuit Relays - 1 Set There shall be one set of Metering Compartmentincorporated with the following:- i) CTs of ratio 400/5Amps of Class 1.0 and burden 15VA with CT short link terminal block for metering -3 Nos. ii) 1No Class 1.0, 96Sq.mm. Digital multi functionmeter with rcuit Relays - 1 Set 125 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed ShortCircuit Relays - 1 Set Bus coupler -2 :1000 Amps 4P EDO ACB of 50kA(Ics) withstanding capacity with Adjustable Overload, Short Circuit Relays -1 Set Outgoings :Part - B400 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set 250 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed ShortCircuit Relays - 1 Set 125 Amps TPN MCCB of 3 5kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed ShortCircuit Relays - 1 Set Outgoings :Part - C400 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set 250 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed ShortCircuit Relays - 2 Set 125 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short etc., complete complying with standard specification and as directed by SIPCOTofficers.

AUTOMATIC POWER FACTOR CORRECTION

RELAY PANEL (APFCR PANEL)

Supplying,erecting,connecting & commissioning of 200 KVAR APFCR Panel in MS CRCA sheet with free standing floor mounting enclosure with all necessary interconnections of capacitor Bank for 12-steps APFC relay shall be incorporated the following capacitors to maintain the power factor.INCOMER : 630 Amps TP+N MCCB of 35kA(Ics)withstanding capacity .. 01 No. with Adjustable overload and Fixed Short Circuit Relays There shall be one set of Metering Compartment incorporated with the following:- i) VAR capacitor, On Off indicator and OnOff push button.4Sets - 25kVAR Banks each comprising :100A 25kA TP MCCB, with 25KVAR capacitor duty contactor, 25kVAR capacitor, On Off indicator and OnOff push button.1Set - 15kVAR Banks each comprising :63A 25kA TP MCCB, with 15KVAR capacitor duty contactor, 15kVAR capacitor, On Off indicator and OnOff push button.3Set - 10kVAR Banks each comprising :40A 25kA TP MCCB, with 10KVAR capacitor duty contactor, 10kVAR capacitor, On Off indicator and OnOff push button.1Set - 5kVAR Banks each comprising :25A 25kA TP MCCB, with 5KVAR capacitor duty contactor, 5kVAR capacitor, On Off indicator and On Off push button.Busbar 1Set - 630A TPN Aluminium bus bars, nterconnections with color coded heat shrinkablesleeves and SMC Bus bar supports. etc., complete complying with standard specification and as directed by SIPCOTofficers

SUB SWITCH BOARD 1

Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:-Incomer 630 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set V 400 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 1Nos 250 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 1Nos 125 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 4Nos 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 4Nosetc., complete complying with standard specification and as directed by SIPCOTofficers

SUB SWITCH BOARD 2

Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:- Incomer 400 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set Outgoing 250 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 2Nos 125 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 3Nos 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 5Nos etc., complete complying with standard specification and as directed by SIPCOTofficers

POWER SWITCH BOARD 1

Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:-Incomer 125 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set Outgoing 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 7Nos etc., complete complying with standard specification and as directed by SIPCOTofficers

MLSB Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:- Incomer 250 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set Outgoing 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 6Nos etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and installation of 10KVA 3 phase UPS with battery bank 1 hour backup etc., complete complying with standard specification and as directed by SIPCOTofficers

SAFETY ACCESSORIES

AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories

2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS - 5Nos

First Aid Box complete with all First Aid Medicines

Shock Treatment Chart fixed in glass frame

4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

Hand Gloves 11KV Grade

Danger Board as required by the Electrical Authorities

Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

Earth Discharge Rod

Design , manufacture,supply,delivery,erection,testing and commissioning of 26 passenger capacity lift with power operated center opening door with the following specification.(G + 4 Floors) Hoistway Dimensions : 2100 mm W × 2400 mm . Car Dimensions( W × D× H -mm ) : 2100mm W × 2400 mm Car &Hoistway door : Cental Opening (CO) Door Opening (W × H -mm): 900 mm W × 2000 mm Door Operator : DC Door Operator COP : COP for staps<=12(950mm) in Stainless Steel Car Position Indiacator : Monochrome LCD-Blue Background & White font ,Dot matrix( LED) Scrolling Display Hall Fixtures: O2000 Pan Type Fixture, Hall Fixture Face Plate: Stainless Steel#4(Hairline) Hall Button Arrangement : HPI. Standards Features : ( a). Anti-nuisance a all protection (b).Independent Service( for duplex only) (c).Overload Device (d).Nudging (e).Emergency fireman's service (f).Emergency Car Light Unit (g).Infrared Curtain Door Protection ( h).Door Time Protection (i).Emergency Alarm Button (j). Door Open /Close Button (k).Manual Rescue Operation Options included: Automatic Rescue operation Type of lift:passenger Cum bed llift Capacity of lift:26 persons /1768 kg Speed :2.00 metre/sec.Comprehensive servicing andaintenance of lifts for further period of 2 years beyond free warranty period of one year from the date of commissioning of lifts will be paid at the rate of 5% of capital cost of lift etc complete complying with standard specification and as directed by the SIPCOTofficers

Supply and fixing of 12 T Dock Leveler (Radius Lip type) designed as per EN 1398 standard for the most demanding loading and unloading operations with platform constructed for a carrying capacity of 12 T point load and robotically welded supporting beams to create a precision engineered product with a self-supporting base construction safely and reliably controlled via an electro-hydraulic system with a single push button which activates the Dock Leveler into operation. Robotically welded platform and lip in anti-slip steel to be pre-mounted on a frame, to be laid on a slab built on the bottom of the prefabricated pit or dock tray which allows a perfectly squared,flush with pavement pit which is aesthetically pleasing and represents the complete solution to all problems of building a pit. The leveler is welded at the head and foot of the pit onto the profiles and is powered by electro hydraulic powerpack inside the pit. Side Flaps - Automatic side flaps allow the choice of a wider platform. Operator & control Unit : Electro-hydraulic operator 415 V 50 Hz IP 54. Membrane Push Button with press & hold actuation and emergency stop integrated in IP 65 enclosure with all the necesary accesories and wirings. etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply of 250KVA, ( 6SL1500TA G3) KOEL GREEN GENSET incorporating Kirloskar Water Cooled Diesel Engine, Kirloskar Green alternator, 3 phase, 415 Volts, 0.8 PF, Standard control panal CPCB II approved Acoustic Enclosure, Battery & Diesel Tank ( Generator Used for Producing electricity)Techincal specification enclosed including Liasioning with electrical inspector for preparation of drawing such as schmatic layout , earthing layout etc., submission of drawing to electrical inspector (chennai south) and getting drawing approval. Preparation of work completion report and arranging EI inspection . Preparation of defect report after inspection and obtaining safety certificate. etc complete complying with standard specification and as directed by the SIPCOT Officer

Manufacturing, Supplying and Fixing of Automatic Grade Boom Barrier of 50Hz frequency,220V Voltage , 120W Power,Single Phase,Working Temperature 35deg C-75deg C,Motor Rotational Speed 1400 RPM etc complete comlying with standaard specifcication and as directed by the SIPCOT Officer

Supply and Fixing of 40 Watt Ceiling Mounted FOS 2x2 LED Panel Lights are elegant in design and integrate seamlessly with your white ceilings. Made using Edge-Lit LED Lighting technology, FOS 2x2 Ceiling LED Panel Lights have the slimmest profile of just 10.5 mm thereby, offering better lighting performance and appearance than back-lit LED Panels. etc., complete complying with standard specification and as directed by SIPCOTofficers

supply delivery and fixing of TurnStyle etc., complete complying with standard specification and as directed by SIPCOTofficers

supply and laying of Raceways Along with thefloors Junction Box Made of GI fixing in RCC slab etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and installation of solar pannels with UPS & batteries Along with necessary Fitting To be Installed As per instruction of SIPCOTofficer

0.5KW DOL Starter

3.5KW DOL starter

11KW STAR/DELTA Fully automatic

Supply, Installation, Testing and Commissioning of the ON/OFF Lockable push button station mushroom type with ON/OFF indication lamps fixed in a suitable Weather proof MS enclosure,painting,earthing etc., with necessary frame works & fixing accessories near the equipments as required. The push button station should have potential free contactors to know the status and control of ON/TRIP from BMS. etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and fixing of the PVC Outdoor weather proof Junction boxes(IP66) suitable for post of lattern poles for loop-in loop-out cables with suitable knock out holes for cable glands, termination arrangment with earthing and necessary mounting arrangement on poles. etc., complete complying with standard specification and as directed by SIPCOTofficers

Buried cable trench

Excavation of the 600mm(W) x 600mm(D) cable trench in soil including river sand cushioning (150mm thick both at top and bottom of the cable), brick protection covering after laying the cable,back filling, ramming and compacting the soil,etc., as required. etc., complete complying with standard specification and as directed by SIPCOTofficers

Excavation of the 1000mm(W) x 1000mm(D) cable trench in soil including river sand cushioning (150mm thick both at top and bottom of the cable), brick protection covering after laying the cable,back filling, ramming and compacting the soil,etc., as required. etc., complete complying with standard specification and as directed by SIPCOTofficers

Supply and laying of following pipes in ground with connected accessories like bends and couplings etc. The cost including excavation to a depth of 750mm to 1000mm from existing ground level, putting PCC around the pipe, back filling, ramping the soil, making the surface to match the original surface as required. etc., complete complying with standard specification and as directed by SIPCOTofficers

110mm dia.PVC pipe

200mm dia. PVC pipe

300mm dia. PVC pipe

Supply and laying of the following size RCC hume pipes with collar.The cost including excavation to a depth of 750mm to 1000mm from existing ground level, plasterings, back filling, ramping the soil, making the surface to match the original surface as required. etc., complete complying with standard specification and as directed by SIPCOTofficers

100 mm dia

200 mm dia

300 mm dia

90 Mm Dia HDPE Pipe with accessories

WELD MESH PROVISION FOR TRANSFORMER YARD

PROVISION OF GATE FOR ACCECING TRANSFORMER YARD AREA [1.5X2m]-GI PIPE SWING GATE

EXCAVATION OF TRENCH FOR ELECTRICAL TRANSFORMER YARD AREA [0-2M DEPTH]

SUPPLY AND FILLING OF TRANSFORMER YARD WITH 3/4'' JELLY FOR 1.5' HEIGHT

PROVISION OF PLATFORM FOR ELECTRICAL YARD ITEMS

supply delivery and fixing of 1.5 Ton SPLIT AC etc., complete complying with standard specification and as directed by SIPCOTofficers

PART-D FIRE FIGTHING ARRANGEMENT

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the SIPCOT Officer

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the SIPCOT Officer

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the SIPCOT Officer

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc. complete as per standard specification and as directed by the SIPCOT Officer

Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the SIPCOT Officer

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fizing and incidental charges etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the SIPCOTOfficers

Supply, erection, testing and commissioning of MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the SIPCOT Officer

Hydrant Pipe

150mm Dia

100mm Dia

Sprinkler Pipe

100mm Dia

80mm Dia

50mm Dia

25mm Dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’,gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer

200mm Dia

100mm Dia

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer

200mm Dia

150mm Dia

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc. complete as per standard specification and as directed by the SIPCOT Officer

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Butterfly Valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motorincluding necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer

150mm Dia

100mm Dia

Supply, fixing, testing & commessioning of dial type (150mm) Glycerin filled pressure gauge with isolation ball valve suitable for working pressure of 250 PSI with no syphon, cost shall be inclusive for providing any short pieces, nipples, elbows etc all complete as per standard specification and directed by the SIPCOTofficers

Providing, fixing pipe supports 100mm dia from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification. and as directed by the SIPCOT Officer

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply erection testing and commissioning of Electric Motor Driven Fire Pumpset suitable for automatic operation and consisting of following:a. 1 No. horizontal split casing centrifugal type fire pumpcapable of delivering 4550 LPM against a total head of 110metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel. b. 1 No. squirrel cage induction motor of 175 HP, 415 Volt, 3 phase 50Hz rating, conforming to IS:325-1978 with class "F" insulation, totally enclosed, IP 55 for enclosure fan cooled type conforming to relevant protection clause of IS 4691, synchronous speed of 2900 RPM.c. Common bed plate fabricated with MS channel / cast iron type for assembling the pump and motor flexible coupling between the pump and the motor with coupling guard for protection - 1 No.d. Making cement concrete foundation suitable for the above pumpset including vibration isolation pads as necessary, foundation bolts, brackets, clamp fixtures, grouting, etc., inaccordance with the manufacturer's design and as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard Specification and as directed by the SIPCOT Officer

Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable forautomatic operation and consisting of followings complete in all respects as required.a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 2850 LPM against a total head of 70 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring, etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel. b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete.c. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoid switches etc.d. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc. and as directed by the SIPCOT Officer

Supply, installation, testing and commissioning of 240 Watts power Amplifier unit with Mic. Inputs, control wires,power cables, etc., as per standard methods and as directed by the SIPCOT officers.

Supply and runs of 2 core 1.5 sqmm multi strand shielded Copper Cable for PA wiring between PA console and PA speaker provided in respective Zone in existing 20/25mm dia PVC pipe as per standard methods and as directed by the SIPCOT officers.

Supply and laying of 25mm dia PVC conduit Pipe in wall or Ceiling using suitable size GI mounting bracket, anchor Fateners,nylon strap etc., as per standard methods and as directed by the SIPCOT officers.

Supply and laying of Wall mounted volume control complete with back box, necessary fixing accessories. etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply and laying of Table mounted type with ghoose neck mike, neccessory fixing & connecting accessories. etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply and laying of suitable floor Mountable powder coted Rack with 6x5A Power Manager, 2 Horizontal Cable Manager, 4 position fan, min 1 nos of shelf, Front Glass door with Lock & key for PA system etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply and laying of sizes 4 core 16 sq.mm. armoured aluminium cable of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc., The rate inclusive of all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessaryetc., complete as per standard specification and as directed by the SIPCOT Officer

(PART-E) HVAC

SECTION – A : VRF EQUIPMENT ( INDOOR & OUTDOOR UNIT )

VARIABLE REFRIGERANT FLOW OUTDOOR UNITS (VRF ODU): Supply Installation,Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,having all hermetically sealed inverter type Scroll Compressor(s),minimum two compressors for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R410A Refrigerant, vibration isolators, with suitable foundation etc. complete as required.The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping.The unit shall be suitable to work on 400V+/10%, 3Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required.The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 . etc., complete as per standard specification and as directed by the SIPCOT Officer

32 HP (16 HP + 16 HP)

4.0 TR, 1669 CMH (Lobby, Conference, startup, Product dev.)

3.2 TR, 1442 CMH (Tooling, Prototyping, Seminar)

2 TR, 900 CMH (Server, Office, Lobby)

1 TR, 400 CMH (Cabins)

SECTION- B : REFRIGERANT PIPING AND PVC CONDESATE PIPING

41.3 mm dia with 19 mm thick insulation

34.92 mm dia with 19 mm thick insulation

31.75 mm dia with 19 mm thick insulation

28.57 mm dia with 19 mm thick insulation

25.4 mm dia with 19 mm thick insulation

22.2 mm dia with 19 mm thick insulation

19.05 mm dia with 19 mm thick insulation

15.87 mm dia with 19 mm thick insulation

12.52 mm dia with 13 mm thick insulation

9.52 mm dia with 13 mm thick insulation

6.35 mm dia with 13 mm thick insulation

PVC CONDENSATE PIPING: Supply,installation,Testing & Commissioning of Heavy duty PVC pipes of following sizes; with 9mm thick Aluminium Foil faced Nitrile Rubber Insulation etc., complete as per standard specification and as directed by the SIPCOT Officer

25mm Dia

32mm Dia

40mm Dia

SECTION – C : DUCTING AND AIR TERMINALS

FACTORY MADE RECTANGULAR GI DUCTING : Supply, installation, testing and commissioning of factory made lock-forming quality rectangular GI ducting, complying with IS: 277 and having 120 GSM coating classification. The price include the cost of necessory accessories & supports (like TDF flanges, ms angle flanges, neoprene gaskets, threaded rod, corner saddles, guide vanes as per SMACNA standards, joints, labelling etc., complete as per standard specification and as directed by the SIPCOT Officer

24 Gauge ( 0.63 mm Thick )

22 Gauge ( 0.8 mm Thick)

20 Gauge ( 1.0 mm Thick)

FACTORY MADE FLAT OVAL GI DUCTING : Supply, installation, testing and commissioning of factory made lock-forming quality Flat Oval GI ducting with Inner Thermal Insulation, complying with IS: 277 and having 120 GSM coating classification. The price include the cost of necessory accessories & supports (like TDF flanges, ms angle flanges, neoprene gaskets, threaded rod, corner saddles, guide vanes as per SMACNA standards, joints, labelling etc., complete as per standard specification and as directed by the SIPCOT Officer

24 Gauge ( 0.63 mm Thick )

22 Gauge ( 0.8 mm Thick)

SEMI RIGID DUCT: Supply, installation, testing and balancing of Semi Rigid duct as per above specification. etc., complete as per standard specification and as directed by the SIPCOT Officer

150 mm Dia

SUPPLY AIR ROUND DIFFUSER: Supply, installation, testing and balancing of aluminum powder coated circular / square diffuser with collar damper as per approved shop drawings and with standard flange size. etc., complete as per standard specification and as directed by the SIPCOT Officer

300 mm Dia

GRILLES: Supply, installation, testing and balancing of aluminum powder coated grilles as per approved shop drawings and specifications with standard flange size. Note: the grille colour shall be as per the client/architect requirements etc., complete as per standard specification and as directed by the SIPCOT Officer

LOUVER : Supply, installation, testing and commissioning of extruded Aluminium powder coated Fresh air & Exhaust air louver. The color & pattern shall be pre-approved by Architects/Client. etc., complete as per standard specification and as directed by the SIPCOT Officer

DOOR TRANSFER AIR GRILLES: Supply, installation, testing and commissioning of aluminium powder coated grilles with standard flange size. etc., complete as per standard specification and as directed by the SIPCOT Officer

ROUND DISC VALVE: Supply, fixing and testing of Al. powder coated Round disc Valve of 150 mm dia for Toilet Exhaust with damper. etc., complete as per standard specification and as directed by the SIPCOT Officer

COLLAR DAMPERS: Supply, installation, testing and commissioning of aluminium collar damper to be mounted for grilles & diffusers. etc., complete as per standard specification and as directed by the SIPCOT Officer

FIRE-RETARDANT CANVASS: Supply, installation, testing and commissioning of fire-retardant canvss, with GI matching flanges, with a provision of operable zip. The entire assembly shall be fabricated at factory. etc., complete as per standard specification and as directed by the SIPCOT Officer

SPICOT DAMPER: Supply and installation of GI Spicot Damper etc., complete as per standard specification and as directed by the SIPCOT Officer

150 mm Dia

VOLUME CONTROL DAMPERS: Supply, installation, testing and commissioning of Factory fabricated Rectangular shape Aero foil type Aluminium volume control dampers, 1.2-mm Al Frame, 1.0-mm, 150-mm width, with required hardware and accessories. Stiffen damper blades for stability. Include locking device to hold single-blade dampers in a fixed position without vibration & engraved marking on position of damper, as per specifications. The shafts shall be suitable to mount electric actuators, where-ever required. Dampers' flanges shall be suitable to TDF. Please refer technical specifications for complete details and scope & quote accordingly. etc., complete as per standard specification and as directed by the SIPCOT Officer

BACK DRAFT DAMPERS: Supply, installation, testing and commissioning of Factory fabricated Rectangular shape Aero foil type Aluminium volume control dampers, 1.2-mm Al Frame, 1.0-mm, 150-mm width, with required hardware and accessories. Stiffen damper blades for stability. Include locking device to hold single-blade dampers in a fixed position without vibration & engraved marking on position of damper, as per specifications. The shafts shall be suitable to mount electric actuators, where-ever required. Dampers' flanges shall be suitable to TDF. Please refer technical specifications for complete details and scope & quote accordingly. etc., complete as per standard specification and as directed by the SIPCOT Officer

FIRE DAMPERS: Supply, installation, testing and commissioning of Fire dampers with fusible link, 1.5-hours fire rating, for supply ducts and return air duct where-ever crossing the space separating walls or as shown in the drawings. The damper shall be made out off 1-mm thick gal vanished Sheet metal blades, with 1.4-mm thick Galvanized sheet frame, Fusible link Fire dampers, 1-mm thick gal vanished Sheet metal blades, with 1.6-mm thick Galvanized sheet frame. etc., complete as per standard specification and as directed by the SIPCOT Officer

MS SUPPORT WORK: Supply, fabrication and installation of mild steel support work for support works as per the drawing , other than for duct, pipe and equipment supporting. The supports should be duly painted using two coats of primer and two coats of black enamel paint. etc., complete as per standard specification and as directed by the SIPCOT Officer

SECTION – D : INSULATIONS

DUCT THERMAL INSULATION : Supply, Installation, Testing, and Commissioning of closed cell 9 mm thick Nitrile Rubber Insulation with Factroy Laminated Alu-foil and with Ultrafresh Antimicrobial protection with both side skin/smooth surface, As per ASTM G21, ASTM G22, UL-181 and E2180. Class “O” IMO A 653 (16), FM Global, UL 94 & EPA approved,with density 40-60kg /m3.Temperature of -50 to 116 Deg C and As per EN12667(DIN 52612).Thermal conductivity of 0.036 W / m K @ 0 deg C. water vapour permeability as per EN12086 (DIN 52615) , Moisture Resistance Factor >= 7000. Alu foil tape of 75mm width should be used to seal the joints with 50 mm wide 3 mm thick self adhesive tape (Black Cotton Tape not acceptable). Material shall be FM approved and preferred color shall be Black [ for duct linear=9mm thk ] Note - if the adhesive is not self adhiesive type then the glue should be used with the same manufacturer.etc., complete as per standard specification and as directed by the SIPCOT Officer

9mm Thick

DUCT ACOUSTIC INSULATION : Design, Manufacture, Supply, Installation, Testing, and Commissioning of Open cell Nitrile rubber for Acoustics , of Class-1 with Ultrafresh Antimicrobial protection as per ASTM G21, ASTM G22, UL-181 and E2180 , FM Global, Density 140-180Kg / m3, UL94 approved (HBF, HF 1 & HF 2) in accordance to UL 94,1996.Thermal conductivity 0.047 W / MK at 20 Deg C, Air Erosion Resistance test Confirming to ASTM Standard C 1071-05 (section 12.7). For application use Low Voc Adhesive. thickness as per specification. [ for duct linear=15mm thk ] Note - if the adhesive is not self adhiesive type then the glue should be used with the same manufacturer. etc., complete as per standard specification and as directed by the SIPCOT Officer

10mm Thick

UNDERDECK INSULATION : Supply, installation, testing and commissioning 13mm thickness of closed cell nitrile preformed sheet insulation without Aluminium foil for underdeck insulation with support like round insulation disc and cross steel wire. Adhesive shall be used as recommended by insulation manufacturer for applying over concrete structures. etc., complete as per standard specification and as directed by the SIPCOT Officer

SECTION – E : FANS

CABINET FRESH FAN: Supply, installation, testing and commissioning of Ventilation fan cabinet type units. The unit shall be 0.6mm GIS construction, belt driven centrifugal fan, High efficiency motor, spring vibration isolator for fan and motor, Fire retardant canvass connections, with acoustic enclosure for fan & noise level not exceed 65 dBA at 1.5m distance,weatherproof type, internal power and control wiring, GI base frame complete as per specifications as required. Fan motor shall be suitable for 415±10% volts, 50Hz, 3 phase AC supply & & 230V, 1 phase, 50Hz AC supply. etc., complete as per standard specification and as directed by the SIPCOT Officer

Air Qty: 2210 CMH, ESP: 15mmWC ( 3D Printing & CNC)

INLINE EXHAUST FANS: Supply, Installation, testing and commissioning of factory-fabricated, assembled,tested, and finished, direct-driven circular / Rectangular fans consisting of internally lined housing, wheel, fan shaft, bearings, motor, drive assembly, with joints between sections sealed. The mounting frame will be Galvanized Steel frames of minimum 3-mm Thick with factory fabricated corner pieces. etc., complete as per standard specification and as directed by the SIPCOT Officer

Air Qty: 1700 CMH, ESP:15mmWC ( Toilet ,Electrical Room , Low Voltage Room)

AXIAL FAN : Design, Supply, installation and commissioning of the following capacity Axial Flow Fans with silencer length is equal to fan dia. The fan motor shall be suitable for operating on 415±10% V, 3 phase, 50Hz AC supply. The cost shall inclusive of required length and adequate power wiring from the nearest isolator to the fans, weatherproof, wall housing, Fire retardant canvass connections, vermin net on both sides, louvers on one end, steel supports required for mounting the fan and bird screen, wire mess and storm proof louvers as required etc., complete as per standard specification and as directed by the SIPCOT Officer

Air Qty: 19550 CMH, ESP: 25mmWC (3D Printing & CNC Pressurization, Microbiology), Motor Rating: 11KW

Supply, installation, testing and commissioning of Pressure Sensor located at Pressurized Room to maintain the pressure.The sensor shall be microprocessor based and shall incorporate suitable measurement techniques to be capable of generating an output signal proportional to the pressure achived the signal need to transmit to close the damper & maintain the fan Speed. etc., complete as per standard specification and as directed by the SIPCOT Officer

PART-F CCTV

Supply,Installation , testing and commisioning of 3Mpx Indoor dome 2048 x 1536 at 30fps, Autofocus Motorized remote zoom lens 2.8 - 12mm, H.265, H.264 compression, 50mtr Adaptive IR, 120dB true WDR as per IEC 62676. Minimum Illuminator @F1.4 0.016lux color; 0.007lux Mono, 3D noise filtering, Bi directional Full Duplex Audio, inbuilt mic, 1 Alarm In, 1 Alarm out,3 independant stream, 8nos of configurable privacy mask, Supported protocol - TCP/IP, Ipv4 & IPv6,UDP/IP, DNS, DDNS,ARP, ICMP, IGMP, RTCP, SFTP, SIP, TLS/TTLS, ARP.802.1x (EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP and EAP-FAST). Edge based analytics - Object Counting, Adaptive Motion, . Camera shall features of Corridor mode, Mirror mode, having SD card provision of 2TB, Operating temperature -10 to +55deg C,IK10,Works on PoE, 24 VAC & 12VDC, Power consumption 12W, ONVIF profile S,G, Q & T,Cybersecrutiy Cert:UL/NDAA, CE - EN 55032 (Class A), EN 50130-4, EN 60950- 1,FCC (Class A) - 47 CFR Part 15,UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07, BIS certified.to ruggedized performace camera should meet Shock & Vibration Certifcation:IEC 60068:2-6 and 2-27 The Camera to be provided by OEM should not be complying to GB28181, GB/T28181-2011 standards and there should be no option to activate or deactivate GB/T 28181 standards in the camera web page/Settings.All complete complying with relevant standard specification and as directed by the Engineer (Brand: Dahua or equivalent) etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply,Installation , testing and commisioning of 3Mpx Bullet 2048 x 1536 at 30fps, Autofocus Motorized remote zoom lens 2.8 - 12mm, H.265, H.264 mpression,Smart Codec, internal/external 50mtr Adaptive IR, 120dB true WDR as per IEC 62676. Minimum Illuminator @F1.4 0.016lux color; 0.007lux Mono, 3D noise filtering, Bi directional Full Duplex Audio, 1 Alarm In, 1 Alarm out, 3 independant stream, 8nos of privacy mask, Supported protocol - TCP/IP, Ipv4 & IPv6,UDP/IP, DNS, DDNS,ARP, ICMP, IGMP, RTCP, SFTP, SIP, TLS/TTLS, ARP.802.1x (EAP-MD5, EAP-TLS, EAPTTLS, EAP-PEAP and EAP-FAST), Edge based analytics - Motion Detection, Camera Sabotage, Audio Detection, Object Counting, Adaptive Motion, Object Removal, and Directional Motion. Camera shall features of Corridor mode, Mirror mode, to ruggedized performace camera should meet Shock & Vibration Certifcation:IEC 60068:2-6 and 2-27, Camera should having SD card provision of 2TB,Contruction:Aluminium, Operating temperature -40 to +60deg C, IP66 and IP 67, IK10,Type 4 X Certification, Works on PoE , 24VAC & 12 VDC, Power consumption 37W, ONVIF profile S,G, Q & T, Cybersecrutiy Cert:UL/NDAA, CE - EN 55032 (Class A), EN 50130-4, EN 60950-1, FCC (Class A) - 47 CFR Part 15,UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07, UL/IEC/EN 60950-22, ICES-003 (Class A) BIS certified The Camera to be provided by OEM should not be complying to GB28181, GB/T28181-2011 standards and there should be no option to activate or deactivate GB/T 28181 standards in the camera web page/Settings. (Brand: Dahua or equivalent) etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply installation Testing and Commissioning of Video Management Server with 32 Channel - 2 SATA (2 Nos. Hard Disk). It should have Intel® Xeon® Silver 4210 or better with 64 GB DDR4 ECC RAM or better. It should run on Microsoft® Windows® Server 2016 or latest.It should have 960 GB SSD for operating system. For Optimized smooth performance of video, it should have Matrox G200eR2 Graphics. It should have dual power supply. it should have 1GbE Network ports (2x), 10GbE SFP+ ports (2x). it should support IPv4 and IPv6 version. *Enables and supports Risk Management Framework (RMF) *TLS-based encryption over HTTPS *Supports video and data encryption using AES-128-256 through third-party disk encryption software *Incorporates FIPS 140-3 validated cryptographic modules *Data base server should support N+N (1+1 in this case) redundancy.*Load balancing for DB redundancy should be considered. te complying with relevant standard specification and as directed by the SIPCOT Officer

Supply fixing and Installation of 24 Port POE Switch 24 ports 10/100/1000Mbps 2 port 1000M SFP Port 1/2 ≤60 Port 3-24 ≤30W Total≤240W etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply fixing and Installation of 8 Port POE Switch 16 ports 10/100/1000Mbps 2 port 1000M SFP Port 1/2 ≤60W， Port 3-16 ≤30W Total≤190W etc., complete as per standard specification and as directed by the SIPCOT Officer

Installation of 8TB Surveillance hard disk etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply fixing and Installation of 6core Outdoor OFC unarmored overhead cable etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply fixing and Installation of Fiber Media Convertor T10/100 , Fiber Optic Patch Cord with RJ45 Connector (Brand : Tplink or equivalent) etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply fixing and Installation of D-Link 8Port Gigabyte Switch (10/100/1000) etc., complete as per standard specification and as directed by the SIPCOT Officer

Installation Testing & Commissioning Charges Scoops Of work Fixing of RJ45 Connector & Configure cctv Camera etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply , Installation , Testing and Commissioning of 43" LED 24x7 operational displays with necessary accessories etc.,.All complete complying with relevant standard specification and as directed by the SIPCOT officer

PART-G LAN NETWORK

Supply fixing and Installation of LAN NETWORK SWITCHES : Fully Managed 10/100/1000 Layer -3 with 10G Uplink - 24 Port with Fibre Port etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply fixing and Installation of I/O Socket - Face Plate Dual Socket RJ -45 With CAT 6 PVC Module Box etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply fixing of Rack With Accessories - 9U Rack etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply fixing and Installation of Patch Cord -3 Metre Length etc., complete as per standard specification and as directed by the SIPCOT Officer

Supply fixing and Installation of CAT 6 Armoured Lan Cable etc., complete as per standard specification and as directed by the SIPCOT Officer

TP-Link WiFi 6 AX1500 Mbps Archer AX10,Smart WiFi,Triple-Core CPU, Gigabit, Dual-Band OFDMA, MU-MIMO, Compatible with Alexa, Wireless Router,Black (TP Link -Business Router) (Vendor Spec) etc., complete as per standard specification and as directed by the SIPCOT Officer

(PART-H) Intercomm EPABX and Biometric System

Supply, fixing and Installation of Face And Fingerprint Biometric Reader with communication interface of WIFI,TCP/IP,RS232/485 and USB , and 1GHz High Speed CPU Processor , 125kHz EM RFID Card ,4.3" touch Screen 480x272 Pixel LCD ,16 bit Hi-Fi Voice & Sound Indication Brand: BioMax/ Equivalent etc complete complying with standard specification and as directed by the SIPCOTofficers

Supply,fixing and Installation of S-Tech EPABX Machine CS416 for Main Trunk Lines and 50Extension Telephone Intercom SystemCapacity: 4 Main Lines (Trunk Line/ P and T) and 50 Extension ,Internal/External Music on Holding, Operator/Auto-attendant Mode, Remote Programming Day/Night Mode(Manual), Music & Ringing Recordable OGM(outgoing message), Music Duration 20 Seconds Caller ID, Call Transfer, Call Forwarding Manually, Outgoing Call Transfer, Power Failure Transfer, Specific Main Line (C.O./Trunk Line) Dialing, Three Way Conference, Do Not Disturb, Auto/Manual Dial-Out Mode etc., complete as per standard specification and as directed by the SIPCOT Officer

Brand: S-TECH / Equivalent etc complete complying with standard specification and as directed by the SIPCOTofficers

PART-I UG SUMP

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOTofficers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. etc., complete as per standard specification and as directed by the SIPCOT Officer Earth work excavation for foundation in all soils and sub-soils

Supplying and filling in foundation and basement with filling sand in layers of 100mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand and as directed by the SIPCOT Officer.

Plain Cement concrete 1:4:8 (one cement, five sand and ten aggregate) 100mm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification. etc., complete as per standard specification and as directed by the SIPCOT Officer

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. and as directed by the SIPCOT Officer

plain surface

vertical surface

Rainforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOTofficers

Brick work in cm 1:3 (one of cement and four of Msand) using chamber burnt second class ground moulded stock bricks of size 9”x4-3/8”x2-3/4” (23x11.2x7cm) for stair case steps including proper setting, scaffolding, curing etc., complete in all respects in all floors and as directed by the SIPCOTofficers

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by SIPCOT officers.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT Officer (Interior Plastering)

Providing Polymer coating (Water Proof coating) for sunken portion of toilet with following specification and the surface shal be cleaned to remove all dust,foreign,matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry : Dry blend and polymer liquid shall be mixed into desired ratio as per recommandation of the supplier.The mix shall be stirred thoroughly until no bubbles remain in the mix.any lumps found in mix shall be removed.Apply first coat of polymer modified cementitious slurry by brush on wet cleanes surface.After drying,second coat shall be applied on the first coat as directed by the SIPCOTofficers etc,The rate inclusive of cost of materials and labour,etc complete complying with standard specication and as directed by the SIPCOTofficers

Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels for reinforcement Fe500 HYSD for all floors including cost of steel, binding wire, bending, tying etc, all complete complying with relevant standard specification and as directed by the SIPCOT Officer

Supplying & fixing SFRC MAN HOLE Cover of size 600x600mm etc complete complying with standard specification and as directed by the SIPCOTofficers

Supplying & fixing C I STEPS For sump etc complete complying with standard specification and as directed by the SIPCOTofficers

Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete as per standard specification and as directed by the SIPCOT Officer

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the SIPCOT officers.

Finishing the top of roof with one course of Anti skid / Non Salippery Solar Reflectance index weather proof cool tiles of size 305mmx305mmx7mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the SIPCOTofficers

PART-J COMPOUND WALL

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOTofficers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the SIPCOTofficers.(including Refilling)

Supplying and filling in foundation and basement with filling sand in layers of 100mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand and as directed by the SIPCOT Officer.

Plain Cement concrete 1:5:10 ( One of cement, five of sand and ten of hard broken stone jelly) for foundation and flooring using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the SIPCOT Officer

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. and as directed by the SIPCOTofficers (Payment for centering shall be given after the concrete is laid)

plain surface

vertical surface

Brick work in following Cement Mortar 1:3 using best quality of II Class Ground Moulded Chamber Burnt Brick of size 9" x 43/8" x 23/4"for foundation and basement including curing, etc., complete complying with standard specifiction.and as directed by the SIPCOTofficers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT Officer

Cement Concrete M 25 Mix using ordinary portland cement with water cement ratio not exceeding 0.45 including plasticizer etc for RCC works in super structure 20mm gauge down graded hard broken stone jelly excluding the cost and fabriation of reinforcement grills, shuttering and centering but including vibrating, laying, curing, finishing etc., complete as per standard specification and as directed by the SIPCOT Officer

Supplying, fabricating and placing in position of Mild Steel/ Ribbed Tor steel for reinforcement for all RCC works in all floors including the cost of binding wire, bending, tying and applying one coat of Cement Slurry etc., complete in all respects and as directed by the SIPCOT Officer

Supplying and fixing Mild Steel grill as per the approved design including one coat of primer and labour for fixing in position etc. all complete. and as directed by the SIPCOTofficers

Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. and as directed by the SIPCOTofficers

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification.and as directed by the SIPCOTofficers (The make, quality and colour of paint should be got approved by the SIPCOT before use on works.)

PART-K PAVER AREA

Earthwork open excavation in all soils and sub soils to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within compound in places shown by the SIPCOTofficers with an initial lead of 10 metre and initial lift of 2 metre and clearing and leveling the site etc., complete complying with standard specification and as directed by the SIPCOT Officer

(a) 0-2m Depth

Supplying and filling in foundation and basement with Filling GRANULAR SUB BASE [GSB] in layers of 300mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand and as directed by the SIPCOT Officer.

Supplying and laying of 83 thick rupper moulded hydralic prened paver block interloading pointed with m sand with requried design meeting their international standerd size with zig zag design with higher loading capacity rate inculiding cost and conveynce of all requried matirials at site and all labour charge, laying , compacting with npaver viprator etc, complying with relevant standard specifications and as directed by the SIPCOT Officer.

Design supply and fixing of PVC Speed Breakers comes with high quality reflectors for night visibilty. PVC Speed Breaker (yellow+ black) sizes (500*400*50mm)no maintenance cost. Every piece gets fix with each other in the slot which helps in weight distribution. PVC Speed Breakers can be filled with concrete underneath for high strength durability etc complete complying with standard specification and as directed by the SIPCOT Officer

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 300mm x 100mm in Cement Concrete 1:2:4 (One cement, Two sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed by the SIPCOTofficers

PART-L STREET LIGHT

Supply and erection of Tubular lamp, using 65 mm dia GI pipe 'B' class pipe with ISI mark of 6 mt length and 20 mm dia GI pipe 'B' class upto 2 mt with necessary reducer couplings and pipe firmly fixed with MS plate of 45 cm x 45 cm x 6 mm thick at the bottom and MS box with 8" x 6" with locking arrangements fixed with lamp post for providing looping in and loopin out connection to the street light fittings and supply and fixing of 15 Amps fuse unit and 15 Amps copper neautral link plate with brass bolts & nuts including concreting using C.C 1:2:4 using 20 mm HBSJ for 1.2 mt below Ground level and 0.3 mt above Ground level and a diameter of 45 cm with necessary earthing civil loop including labour charges for fixing the street light fittings. Earth work excavation, 2 coats of painting over 1 coat of Anti corrosion painting, welding inter connection using 1.5 sqmm copper cable etc., all complete and as directed by the SIPCOT Officer

Supply and fixing of 60W LED Street Light Fitting with LED etc., complete and as directed by SIPCOT Officers.

Supply and laying of 4 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt . Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT Officer

Supply and laying of 4 x 10sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt . Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT Officer

Supply and fixing of brass cable gland for 2 x 10 sq.mm PVC LTUG armoures cable with earth connection etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT Officer

Supply and laying of 3.5 x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt . Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT Officer

Supply and providing cable end termination of 3.5 x 25 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT Officer

Supply and fixing of brass cable gland for 3.5 x 25 sqmm PVC armoured LTUG cable with earth connection etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT Officer

PART-M CULVERT

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOTofficers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.and as directed by the SIPCOTofficers (including Refilling)

Supplying and filling in foundation, basement, etc with filling Granular sub Base in layers of not more than 10 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT Officer

Plain Cement concrete 1:4:8 (one cement, five sand and ten aggregate) 100mm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification.and as directed by the SIPCOTofficers

Cement concrete 1:1 1/2:3 (One of cement, one and half of sand and three of Hard broken stone jelly) for all RCC works namely Tee, Ell-rectangular beams, lintel, parapet cum drops, waist and landing slab, canophy, circular column, fin projections, sunshades, window boxing slab, loft and other similar works using 20mm gauge hard broken stone jelly excluding the cost and fabrication of reinforcement grills, shuttering and centering but including vibrating, laying, curing and finishing etc., complying with relevant standard specifications and as directed by the SIPCOTOfficers Foundation & Basement

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. and as directed by the SIPCOT Officer

plain surface

vertical surface

Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels for reinforcement for all floors including cost of binding wire, bending, tying etc, all complete complying with relevant standard specification and as directed by the SIPCOT Officer

Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. and as directed by the SIPCOT Officer

Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)

Added GST of 18%

GMS Elegant Builders I Pvt Ltd