Construction of Roads in Converted Colony Pulak Vihar and New Pulak Vihar Revenue Village Sukher. 2808

Item Code [2022 5.2 (iii) Tack Coat]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 50

Item Code [2025 3.14]:Item Type [road] :: Construction of sub grade and earth enshoulders with approved material obtained from borrow pits with all lifts and leads , transporting to site, spreading, grading to requireds lope and compacted to meet requirement of Table 300 - 2 with lead up to 50 m as per MoRTH Specification Clause 305.3

Item Code [2025 5.8 type A (ii)]:Item Type [road] :: Mix Seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using Viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per MoRTH Specification Clause 508 By Mechanical Means Type A Bitumen (VG-30)

Item Code [BSR-2025 prime coat 5.1.1]:Item Type [road] :: Providing and applying primer coat with bitumen emulsion( SS-1)on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/ sqm using mechanical means as per MoRTH Specification Clause 502

Item Code [BSR-2025 WMM 4.6]:Item Type [road] :: Providing, laying ,spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill),carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel rollerof80to100 kN weight to achieve the desired density including lighting ,barricading and maintenance of diversion,etcasperTables400-12&400-13andMoRTH Specification clause 406 By Mechanical Means with all lead .

Item Code [Rd-2025 BM 5.3.2]:Item Type [road] :: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as perTable500-7 premixed with bituminous binder, transported to site with all lead laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504 Bitumen (VG-30