Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 254 MG ROAD LAMBA LANE JUNGLIGHAT PORT BLAIR SOUTH ANDAMAN ANDAMAN AND NICOBAR ISLANDS 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance 30 KM GANDHI NAGAR CAMPBELL BAY | CAMPBELL BAY | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | Admitted-Finance |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
11 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE (I) CAMPBELL BAY, ARMY LAND, CAMPBELL BAY, GREAT NICOBAR-744302
PROVISION OF CONCERTINA COIL ON PERIMETER WALL WITH NECESSARY REPAIR WORKS AT 3U DET, CAMPBELL BAY UNDER GE(I) CAMPBELL BAY
2024_MES_660288_1
8148/E8
Open Tender
Civil Works
Item Rate
180 days
CAMPBELL BAY
PLEASE REFER TENDER DOCUMENT AND NIT
8 documents required · 8 mandatory
₹500
GE (I) CAMPBELL BAY
₹84,000
Yes
16 Jul 2024
18 Jun 2024
13 Jul 2024
18 Jun 2024
11 Jul 2024
27 Jun 2024
Amount
Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal of debris to outside MD land and disposed off complete all as specified and as directed.
M & L for use and waste of timber as in formwork to sides of pillars, posts, struts, piers, column and stanchions for rough finished surfaces of concrete square, circular, rectangular on plan or polygonal all as specified and as directed.
M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts all as specified and as directed.
M & L for Mild steel TMT reinforcement Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip all as specified and directed.
M & L for mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia as in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns, hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and directed.
S & F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc., confirming to Fe 410-W (Gde E-250) quality A complete all as specified and as directed.
M & L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint all as specified and directed.
M & L for rendering 10 mm thick in cement plaster (1:6) on fair faces of concrete surfaces finished even and smooth without using extra cement all as specified and directed.
M & L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of cement base paint over a priming coat complete all as specified and directed.
S & F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing (or) tying at crossings with and provision of galvanised mild steel wire, staples (or) steel pins etc.., complete all as specified and as directed. Note : Each line wire to be measured.
S & F Razor Concertina Coil, 610mm dia consisting of spiral with sharp edged tape crimped to a steel wire duly galvanised with scrapper barb having 51 spirals with 125 clips (when stretched to a length of 6m) including fixing to MS work and providing one coat of marine paint over a coat of primer as per manufacturer's instruction and as directed by Engr-in-Charge.
M/S RAJBUILDERS
Kakolil Trade Agencies
Govinda Swamy Construction
T.M.RAMANATHAN AND SONS
M/S G S GREWAL
M/S Sudhir Kumar Gupta
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .