Repair/renovation of two Nos of Toilets at first and second floor of Horticulture Complex ,Jammu.

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer -in-charge:In cement mortar.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, Architrave, holdfasts etc. complete and stacking within 50 meters lead: Of area of 3 sqm and below.

Brick work with Common brunt clay (non-modular) bricks of class designation 7.5 in super-structure above plinth upto floor V level including curing in cement mortar 1:4 ( 1 cement : 4 coarse sand) (Including all carriages and leads).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded , built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e, at top bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminium sections shall be smooth rust free, straight , mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for galzing/ panelling. C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge(glazing, panelling and dash fasteners to be paid for separately.

For fixed portion. Powder coated aluminium (minimum thickness of polyester powder coated 50 microns)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium ( minimum thickness of polyester powder coated 50 microns)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic items.) With float glass panes of 5.0 mm thickness ( weight not less than 12.50 kg/sqm)

Providing and fixing powder coated aluminum work (minimum thickness of powder coating 50 micron) consisting of tee/angle sections, of approved make conforming to IS: 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately)

Providing and fixing of 4.00 mm thick Aluminum Composit Panel sheet ( ACP sheet ) for paneling of aluminum partition / doors of quality and make approved by Engineer-in-charge. Complete work in all respects including all relevant accessories.

Dismantling tiles work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm.

Providing and laying glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of Ist quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cemnet : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. In colour such as white , Ivory, Grey, Fume Red Brown. (Including all carriages and leads).

Providing and laying Ist quality ceramic glazed wall tiles (thickness to be specified by the manufacturers) of Ist quality conforming to IS: 15622 of approved make, in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1: 3 ( 1 cemnet : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc. complete. (Including all carriages and leads).

Providing and fixing water closet squatting pan (India type W.C. pan) with 100 mm sand cast iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe ( of approved make) with manually controlled device ( handle lever ) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I.Brackets , 15 mm dia CP brass single hole basin mixer of approved quality and make , including painting of fittings and brackets , cutting and making good the walls where ever required.White vitreous china wash basin size 550x400mm with a 15 mm CP brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour; Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe (32 mm dia)

Providing and fixing white vitreous china flat back or wall corner type lipped front uninal basin of 430x260 x350mm and 340x410x265 mm sizes respectively.

Providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rail plungs, etc. complete.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 100 mm dia CP gratings conforming to IS standards and approved by Engineer-in-charge.

Providing and fixing upplasticized PVC connection pipe with brass unions,45 cm length and 15 mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138mm. Breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT towel ring trapezpidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concelaed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arragements of approved quality and colour.450 mm long towel rail with total length of 495 mm , 78mm wide and effective height of 88 mm weighing not less than 170 gms .

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved make conforming to IS standards and weighing not less than 810 gms

Providing and fixing 110mm dia heavy duty PVC P - trap conforming to IS standards and approved by Engineer-in-charge.

Providig and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing G.I. pipes complete with G.I.fittings and clamps including cutting and makig good the walls etc. internal work . 15 mm dia nominal bore.

Providing and fixing G.I. pipes complete with G.I.fittings and clamps including cutting and makig good the walls etc. internal work . 20 mm dia nominal bore.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipe conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

75 mm diameter

110 mm diameer

Providing and fixing heavy duty PVC bend of required degree conforming to IS standards and approved by Engineer-in-charge.

75 mm diameter

110 mm diameter

15 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)(Including all carriages and leads).

Engagement of labour for removal of Mulba from Ist /IInd floor to dumping place with in the complex.

Engagement of Tractor Trally for removal of mulba from dumping place with in the complex to dumping yard out side the complex including loading /unlaoding and carriage. Complete job.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A Switch.

3 pin 5/6 A socket outlet

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, tesitng and commissioning etc. as required. (Single poles ).

Providing and fixing of 15 watt LED bulbs of standard quality and make approved by Engineer-in-charge

Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq mm FRLS PVC insulated cooper conductor signle core cable as earth wire in existing surface / recessed steel/PVC conduit including dismentling as required. Group-A.

M/s Satish Ganjoo

Amit Katyal

M/s Mir and Co

M/S MOHD ASHRAF SHAN

Rajeev Kumar

MANZOOR AHMED NATNOO