GE/Token-91/2025-26

S&F in repair 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces, man holes firnished een and smooth without using extra cement with water proofing treatment.

Demolition and breaking up drain pipes of 200mm dia at any depth (Salt glazed ware, AC or Reinforced concrete, DWCPE) set in cement mortar

Demolition and breaking up drain pipes of 150mm dia at any depth(Salt glazed ware, AC or Reinforced concrete, DWCPE) set in cement mortar

M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid (SN8) 180(OD)/163(ID) mm internal dia DWCPE pipes after they are laid and tested complete all as specified (thickness of concrete bed 100 mm).

S&F DWCPE(SN8) 180(OD)/163(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid DWCPE(SN8) 200(OD)/175(ID) pipes after they are laid and tested complete all as specified (thickness of concrete bed 150mm).

S&F DWCPE(SN8) 200(OD)/175(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

M&L Mild steel Round/TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with including necessary formwork etc completed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 60mm thickness, M-40 Gde,Over and including 20mm thick layer of sand complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth.

M&L for 50mm thick PCC 1:3:6 type C2 using 20mm graded stone agg as in sub base complete all as specified..

M&L for 22 to 25mm chequered ultra tiles over 15 mm thick screed bed in cm 1:6 and jointed and pointed in white cement mixed with pigment to match the shade of tiles of flooring all as directed.

S&F Exterior Endura Chequered cement concrete colour tiles 30cm X 30cm x 10mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments incl 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 Complete all as specified and directed by Engineer-in-Charge.

S & F in replacement for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mmx80mm omplete all as specified and as directed.

S & F in replacement for precast plastic fibre reinforced cement concrete Manhole covers with frame medium duty of overall size 450mmx900mmx50mm factory made all as specified and directed by Engineer-in-Charge.

Dismantling fencing wire mesh, any type

ITEM NO-31

ITEM NO-32

ITEM NO-33

ITEM NO-34

ITEM NO-36

ITEM NO-37

ITEM NO-38

ITEM NO-39

Schedule of Credit