Cleaning and Maint of Sewage Lines and Manholes of C Arty Bde Under AGE BR P2 at Faridkot Mil Stn

Amount

Cleaning of existing sewage/drain pipes of dia upto & including 200 mm , at any depth, by rodding (manually/ machanically as required) at site from manhole and well finishing after cleaning including getting out sludge (if any) and liquid materials from connecting manholes deposited in lines, removing the solid and sludge to any distance outside the defence land at their own cost and cost of removal shall be included in the quoted rates complete all as specified and directed .

All as per item No 01 here-in-before but dia of pipe exceeding 200 mm but not exceeding 450mm complete all as specified and directed . Note : Cleaning is to be done through Mechanical means only.

M&L for plugging underground sewer line (150mm to 600 mm dia ) in manholes, at any depth and removing the same after de-sludging of sump well/septic tank complete all as specified and directed .

Cleaning & de-slugging by mechanical means i.e. by Honeysucckers : mechanical sewage cleaning trucks / tractor etc, removing sludge from sump well / septic tank/ soakage pits / manholes etc, of any capacity and any depth, in foul condition including all necessary T & P required for removal of sludge and solid contents to be dispose off outside defence land complete all as specified and directed .

Cleaning of existing shafts/ Janitors by removing of soil, waste materials liquid/solids in foul condition and removing of waste material to any place outside defence land complete all as specified and directed .

Removing blockages including cleaning of CI/SWSG Pipes upto and including 150mm bore from kitchen/bath/wash hand basin /urinal/WC of any length upto 1st manhole by rodding/choke remover manually or other wise including refixing of oval access door covers complete all as specified and directed .

Dismantling CI/PVC pipe alongwith fittings of 75/100mm/110mm dia, below or above GL or laid in floors or fixed to walls, jointed in cement mortar and taking out complete all as specified and directed .

S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .

S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .

S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed .

S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed .

S&F 100mm dia cast iron, soil waste and vent pipe,sand cast, in any length with or without ears with cement joints, laid in trenches, in floors or fixed to walls complete all as specified and directed .

S&F 75mm dia cast iron, soil waste and vent pipe,sand cast, in any length with or without ears with cement joints, laid in trenches, in floors or fixed to walls complete all as specified and directed .

S&F in repair 100mm bore CI Bends (any radius) ,diminishing piece or tapers complete all as specified and direceted .

S&F in repair 75mm bore CI Bends (any radius) ,diminishing piece or tapers complete all as specified and direceted .

M&L in repairs cast iron floor trap, 75mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1(1:2:4) complete all as specified and directed .

M&L in repairs cast iron floor trap, 100mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) complete all as specified and directed .

M&L for MS door bend cover for CI waste/soil pipes of dia 75mm or 100 mm with gaskets including removing old broken covers complete all as specified and directed .

S&F in repair 75mm bore, cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access door complete all as specified and directed .

Demolition and breaking up drain pipe (Salt glazed stoneware, AC or Reinforced concrete) 150 mm dia, set in cement mortar including demolition of haunching concrete and disposal off rubbish to a distance not exceeding 50M complete all as specified & directed .

Demolition and breaking up drain pipe (Salt glazed stoneware, AC or Reinforced concrete) 200 mm dia, set in cement mortar including demolition of haunching concrete and disposal off rubbish to a distance exceeding 1km but not exceeding 1.5km complete all as specified & directed

Demolition and breaking up drain pipes of any description, 300 mm dia, set in cement mortar including PCC haunching and disposal off rubbish to a distance not exceeding 50M complete all as specified & directed

S&F Reinforced concrete pipes of size 150mm (internal dia),class NP-2 (ISI marked) laid, jointed and tested complete with collar in foul condition all as specified and directed .

S&F Reinforced concrete pipes of size 200mm (internal dia),class NP-2 (ISI marked) laid, jointed and tested complete with collar in foul condition all as specified and directed .

S&F Reinforced concrete pipes of size 300mm (internal dia),class NP-2 (ISI marked) laid, jointed and tested complete with collar in foul condition all as specified and directed .

M&L for Concrete bed to drain pipes of dia 150mm in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) including packing under and haunching against the sides of pipe after laid & tested complete all as specified and direced .

M&L for Concrete bed to drain pipes of dia 200mm in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) including packing under and haunching against the sides of pipe after laid & tested complete all as specified and directed .

M&L for Concrete bed to drain pipes of dia 300mm in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) including packing under and haunching against the sides of pipe after laid & tested complete all as specified and directed

Excavation in trenches, not exc. 1.5 meter wide and not exc. 1.5 meter in depth, in foul condition for foundation etc and getting out in soft/loose soil complete all as specified and directed . Note : Necessary dewatering of water shall be deemed to be included in the quoted unit rate of the item

Excavation in trenches, not exc. 1.5 meter wide and depth exc. 1.5 meter but n.exc 3.0 meter, in foul condition for foundation etc and getting out in soft/loose soil complete all as specified and directed . Note : Necessary dewatering of water shall be deemed to be included in the quoted unit rate of the item

Returning, filling in, including spreading, leveling ,watering and well ramming in layers not exc 25cm in soft /loose soil complete all as specified and directed .

Removing excavated material or surplus soil not exc 50 meter and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

S&F in repair Vitreous china squatting pan, 'Orissa pattern' of size 580mm x 440mm, white / coloured with integral foot rest including 100mm bore CI ‘P’ or ‘S’ trap, long neck and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing including PVC flush pipe 32mm dia and connection to WC pan complete all as specified and directed .

M&L for Dismantling terrazzo / glazed tiles in floor/skirting/dado including cement mortar bedding (but not backing) complete all as specified and directed.

S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed

S&F Non skid ceramic coloured tiles 7 to 8 mm thick, Matt finish (Square/rectangular) , area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed in cement mortar 1:4 complete all as specified and directed .

Demolition of cement concrete (unreinforced) as in ground floors and pavings, manhole bedding, drain bedding etc not exceeding 15cm thickness (below or above ground level) of sewer lines and disposal of rubbish to a distance exceeding 1 km but not exceeding 1.5 km complete all as specified and directed .

M&L for cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed .

M&L for Pre cast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar 1:6 as in manhole cover included all neccessary formwork all as specified and directed .

S&F TMT Bars 8mm to 10mm dia, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and biniding with and including MS wire (annealed) not less than 0.9mm dia or securining with clip complete all as specified and directed.

S&F Mild steel framed work conforming to Fe-290 (Gde E-165) as in manhole cover slab border, grills/ guard bars, shouldered with steel windows/ ventilators frames, cooler stand, ladder, wire mesh etc complete all as specified and directed .

Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc in any position and stacking them and disposing off the unserviceable material and rubbish complete all as specified and directed .

M&L for brick work with fly ash brick, old size, straight or covered on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed .

All as per item No 43 here-in-before but except bricks .

M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed .

M&L preparation of new or previously untreated steel surface any description over 10cm widht or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed .

M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed

M&L for Machine pressed precast concret interlocking coloured paver block, any shape and size, conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment all as specified and directed .

M&L for Machine pressed precast concret interlocking coloured paver block, any shape and size, conforming to IS-15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment all as specified and directed .

S&F factory made precast kerb stones in PCC 1:2:4 type B-1 including chamfers, weatherings, throatings etc in smooth finish & set in cement mortar 1:4 including necessary excavtion and earth work for embedding kerb stone at a depth as directed and temping around kerb stone and removal of surplus soil to a distance not exceeding 50 m and depositing where directed complete all as specified and directed .

Dismantling posts or struts (wood, steel or RCC) of any section, including taking out embedded portion in concrete, brick work etc and making good the disturbed ground complete all as specified and directed .

Dismantling fencing wire mesh, any type complete all as specified and directed .

S&F mild steel work as in angle iron posts and struts in fencing, including cutting tops to shape as directed, drilling holes, notching for wire etc,including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-290 Gde E-165 quality complete all as specified and directed

Supply only mild steel galvanized chain link fencing of any size or type complete all as specified and directed. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account.

Fixing only chain link fencing including line wires(steel wire), any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed .

Supply only mild steel round or square bars ,flat iron conforming to Fe-290 Gde E-165 quality complete all as specified and directed .

S&F in replacement galvanised,2strand,steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire,staples or steel pins etc. complete all as specified and directed .

S&F mild steel screw bolts (machine made),diameter of neck 5 to10mm with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n. exc. 5cm long complete all as specified and directed . Note :- A Sum of Rs.4,47,420.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 21 (Schedule of credit) of Tender Documents.

SHIV SHAKTI BUILDERS

BANSAL BUILDERS

G D TRADERS

Darshan Singh Johal and Sons