Construction of kitchen cum store unit for Mid Day meals Govt Hr Sec Schools at Maruthampudur village and panchayat

Amount

Construction of Kitchen cum store unit for Mid-Day meals to Govt.high.sec.school at Maruthamputhur village and panchayat

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Random Rubble Measonry in CM 1:5 mix using required bond stone with simulataneous pointing including all cost and conveyance and all labour charges etc., complete.

Refilling the basement with excavated earth including all labour charges such as watering and ramming etc., complete as per standard specification.

Brick work in CM 1:5 mix using country bricks including all cost and conveyance of materials and labour charges etc., complete.

Centering charges for all RCC works including all cost and conveyance and all labour charges etc., complete.

Supplying and fabrication of steel for RCC works including all cost and conveyance and all labour charges such as cutting bending tieing and placing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing laying ,and finishing etc complete

Finishing the top of roof with one course of Pressed Tiles of size 20 cm X 20 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight, including all cost and conveyance and all materials on complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete.

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Granolithic flooring finishing with CC 1:2:4 mix using 10mm - 12mm ISS chips HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete.

Distempering two coats using best quality and approved colour of oil bound distemper over one coat of cement paint primer including all cost and conveyance of materials, labour charges etc., complete.

Exterior Emulsion using best quality emulsion paint over one coat of cement paint primer including all cost and conveyance of materials, labour charges etc., complete.

Painting with approved colour including cost and conveyance and labour charges etc., complete.

Towards Cost and Supply of steel door and Windows including all cost and conveyance etc., complete.

a)Door (0.90x2.10)

b)Door D1 (0.90x2.10)

c)Window (0.90x1.30)

Labour charges for fixing of stee joineries etc., complete

a)Steel Doors

b)Steel Windows &Ventilators

Providing Electrification arrangements for Kitchen shed

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1 100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PyC Open Light point/fan point (For electronic Regulator) SD 18

Light point

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for Open PVC plug_point SD 36

Supply and fixing of LED 9W SD.80

Supply and fixing of single box type 440 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD88

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

S VIJAYARJUN (BID ID -1503470)