CA NO GE/AFJ-42/2023-24 REPAIR TO FENCING,COMPOUND WALL AND MISC WORKS IN DOMESTIC AREA AT AF STN JAMMU UNDER GE (AF) JAMMU

Amount

SCHEDULE 'A' PART-I

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed

All as per description of serial item No 1.02 above but except bricks complete all as specified and directed.

Demolition of cement concrete in ground floors and paving (un reinforced) including Tiles Pavings blocks if any n exc. 15 cm. thicknesses, below or above ground level, complete all as specified.

M&L PCC 1:4:8 type D-2(40 mm graded crushed stone agg) as Foundation, Filling, mass concrete to fdn etc complete all as speciffied and directed

PCC 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs and similar work including necessary form work complete all as specified.

M&L Precast RCC Jallies,1:2:4 Type B0, 25mm thick ,set in CM 1:4 complete all as specified and directed

Demolition of cement concrete in ground floors and paving ( reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified.

RCC 1:2:4 type B-1 ( 20 mm agg) as in footing / plinth beam / bases of columns etc complete all as specified and directed.

TMT steel bars 10mm dia and over cut to length bent to shape required including crancking bending spirally for hooping to columns hooking ends and binding with mild steel wire (annealed) n. less than 0.90mm dia all as specified and directed.

All as item No1. 10 but 6 to 8 mm dia as in stirrups etc complete all specified and directed

Form work to side of columns , plinth beam etc complete all specified and directed

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all specified and directed

Rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth w/o using extra cement complete all as specified and directed

Dismentling of barbed wire fencing of any type complete all specified and directed

Dismantling of wrought iron or mild steel work such as angle iron fencing post and similar type work or any description not other wise provided complete all specified and directed

Dismantling of chain link fencing of any size, any position and any type etc complete all specified and directed

Excavation in trenches n exc 1.5m wide and not exc 1.5m depth , for foundation etc or for shafts ,manholes, etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soil complete all specified and directed

Excavation in post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good complete all specified and directed

Removal of excavated soil not exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point all as specified and directed.

M&L for MS work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc including necessary welding confirming to Fe-290 Gde E -165 complete all specified and directed

All as item No 1.21 above but fixing only complete all specified and directed

Supply of chain link MS galvanised fencing, 75 x75x 4mm mesh size , etc complete as per manufacture instruction all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire, all as specified and directed

M&L 11mm to 15mm dia MS screw bolts (Machine made) with hexagonal or squre head at one end,screwed at otherend, length of bolt exceedding 5cm and n.exc 10cm with one washer,all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barba at 75 mm spacings and staining and fixing to any type of standard rails strain ing bolts , including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins(each line wire to be measured ) etc complete all specied and directed

All as per item No1. 26 above but fixing only complete all specified and directed

M&L for mild steel works as in framed work such as grills gratings etc with ends of bars shouldered and / or rebated or forged into spikes framed guard bars barred iron doors etc conforming to gde Fe 410-0 or Fe 310-0 welded on spot to existing MS frame work of window complete all as specified and directed

M&L Mild Steel sections confirming to FE-410-W as inFramed work as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr- in charge

M & Lsteel work in tubular trusses including special shaped,size,washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade E 250 including necesssary cutting ,drilling,welding etc complete all as specified and directed.

Dismantling of asbestos cement sheets, CGI, any type corrugated or semi corrugated etc in roof covering complete and set a side complete all as specified and directed.

S& F in repairs pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Ditto as per item no1. 32 but plain sheet etc complete all as specified and directed.

S& F in repair policarbonate sheet 10mm thick any coloured with aluminium jointing strip including filling of cilicon on jointsl, fixed with self tapping screws etc complete all as diredcted by Engr In charge.

Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide zinc chrome primer, complete all as specified and directed

Applying two coats of exterial emulsion paint on newly plastered walls surface including one coat of primer complete all as specified and directed.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

ANIKET TRADERS

M/s Sunny Gupta

Karmnaya Construction

DES RAJ NAGPAL CONTRACTORS PVT.LTD

ANIL KUMAR SHARMA