REPAIR/ REPLACEMENT and CLEANING OF WATER TANKS ALONGWITH STAGING AND REPAIR OF ROOF SHEET/ FLASE CEILING AOR OF AGE B/R I UNDER GE 864 EWS JOB NO- TPP 2024-25

Amount

Dismantling wooden boarding, any description , fixed in any position with nails complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position as in unframed/framed work complete, all as specified and as directed

Dismantling of wall and ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and as directed.

S&F 20mm thick 2nd class soft wood (Kail) boarding clean sawn as in eaves board fixed with nails complete all as specified and as directed.

M&L 2nd class soft wood (kail) as in scantling clean sawn, complete, all as specified and as directed.

S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc complete, all as specified and as directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling all as specified.

M&L for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work all as specified.

S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions and as directed by the Engineer -in- Charge. (Make of E-Board ceiling -M/S ETERNIT EVEREST LTD) or equivalent in particular specification.

M&L preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Dismantling plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof coverings complete, all as specified and as directed

S&F Galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coatch screws and washers in roofs, 0.63 mm thick m Gde-o quality, with 120 grms/sqm zinc coating and Gde 'B' (i.e 12.5 mm ) corrugation, complete, all as specified and as directed

S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers complete all as specified and as directed

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc all as specified.

M & L 15mm thick rendering plaster on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement all as specified .

M&L rendering plaster 5mm thick in cement mortar (1:3) & finishing the surface even & smooth without using extra cement as in ceiling, soffits of slab complete all as specified & directed.

M & L preparation of new plastered surface and applying two coat of cement base paint of approved tint/ colour on wall including cornices, pilasters over a coat of primer as directed by Engr-in-Charge and all as specified

M & L preparing newly prepared surfaces of ceiling and applying two coats of oil bond distemper over chalk whitening preparatory to distempering all as specified.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) as directed.

M & L 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate ) including WPC and without using extra cement finishing cement concrete surface even and smooth all as specified.

M & L PCC 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) as in providing, cement concrete cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs including necessary form work all as directed.

Taking up or down 15mm bore dia, steel tubing & connections including cleaning for refining or removal from site complete all as specfied and directed.

Tubes, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors all as specified.

Taking up or down 20mm bore dia, steel tubing & connections including cleaning for refining or removal from site complete all as specfied and directed.

Tubes, medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors all as specified.

Dismantling wrought iron or mild steel work of any description not other wise provided, Complete all as specified and directed.

S & F Compound girders & stanchions, lattice griders, aerial masts, staging for water tanks & the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc. of Gde Fe 410-W (Gde- E-250) Qty-B, all as specified.

M & L preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer over newly prepared steel surface all as specified.

Dismantling UNSV storage water tank of capacity 1000 Ltrs all as per specification and directed by Engr in Charge

Dismantaling UNSV storage water tank of capacity 500 Ltrs all as per specification and directed by Engr in Charge

S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 1000 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent incl S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia all as specified and as directed

S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 500 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent including fitting ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia all as specified and as directed

S&F ball in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia all as specified and as directed

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia all as specified and as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height all as directed by Engr in charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 500 ltr and n exc 1000 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height all as directed by Engr in charge.

S&F in repair PVC lid for water storage tank of capacity 500 Ltrs of approved make complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC lid for water storage tank of capacity 1000 Ltrs of approved make complete all as specified and directed by Engineer-in-Charge.

M/S Ghulam Mohammad Shalla (BID ID -3176621)

M/S SHIMAR STAR GLACIER (BID ID -3177265)

M/S MOHAMAD YOUSUF AKHOON AND SONS (BID ID -3173538)

M/S NORTHERN ELECTRICAL WORKS (BID ID -3177209)

M/S Sky Engineers (BID ID -3176598)

M/S VALLEY ENTERPRISES (BID ID -3176821)

M/S AIJAZ ENTERPRISES (BID ID -3176980)