REPAIR, RECANNING, PAINTING AND POLISHING OF ALL TYPES OF CHAIRS AT NAVAL BASE UNDER GE (SB) KARWAR

Amount

Chair writing (MEC 181, C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8)

(a)M&L for removing the following unserviceable components of chair writing and replacing the same by S&F new one of 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rail seat

(iv) Rear rail of seat

(v) Front rail of seat

(vi) Bottom stiffner (side)

(vii) Back rest stiffner

(viii) Arms rest

(b) M&L for removing the unserviceable PVC shoes of chair writing and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for preparation of old decorated / new replaced parts /surface of chair writing (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair writing (FD 280)

(a) M&L for removing the following unserviceable components of chair writing and replacing the same by S&F of new one of 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Front rail

(iv) Side rail

(v) Rear rail

(vi) Bottom stiffner

(vii) Rest stiffner

(viii) Arms rest

(b) M&L for removing the unserviceable PVC shoes of chair writing and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for preparation of old decorated / new replaced parts /surface of chair writing (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair writing (Chair padded with arms) (FD/E6/MAP/12,MEC 2941,TP)

(a) M&L for removing old unserviceable Tapestry cloth of chair writing of back rest and seat and replacing the same by S&F of new tapestry cloth of superior quality not less than Rs 350/- per meter as approved.

(b) M&L for removing old unserviceable PVC lipping (beading) and replacing the same by S&F of new PVC lipping of superior quality to rest and seat all as specified and as per drawing.

(c) M&L for removing the unserviceable PVC arms rest and replacing the same by S&F of new arms rest with nut and bolts of trade pattern as approved.

(d) M&L for painting of two coats of black paint (after removing rust/paint) by spray gun to chair writting including applying putty for depressed surface before painting all as specified and as shown on drgs and directed.

Chair dinning (MEC 178,MEC 179)

(a) M&L for removing the following unserviceable components of chair dining and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rail

(iv) Front rail

(v) Rear rail

(vi) Bottom stiffner (side)

(vii) Bottom stiffner (centre)

(viii) Back rest stiffner

(b) M&L for removing the unserviceable PVC shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for removing the unserviceable/broken seat of chair dinning and replacing the same by S&F of new made out of 12mm thick plywood BWP grade covered with 1mm thick plastic laminated sheet of approved shade including tightening of the frame work all shown as per drawing .

(d) M&L for preparation of old decorated / new replaced parts /surface of chair dining (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed and as shown in drawing and as directed.

Chair dinning Type B (C3/MEC/SP/201/MO/8)

(a) M&L for removing the following unserviceable components of chair dining and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Front rails

(iv) Side rails

(v) Rear rails

(vi) Bottom stiffener

(vii) Rest stiffener top

(viii) Rest stiffener side

(ix) Rest stiffener centre

(b) M&L for removing the unserviceable PVC shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for removing the unserviceable seat of chair dinning and replacing the same by S&F of 12mm thick plywood BWP grade with one side teak face of make : Green ply / Century ply including tightening the frame work all as per drawing.

(d) M&L for preparation of old decorated / new replaced parts /surface of wooden furniture smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed and as shown in drawing and as directed.

Chair dinning (FD 279)

(a) M&L for removing the following unserviceable components of chair dining and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rails

(iv) Front rails

(v) Rear rails

(vi) Bottom stiffener

(vii) Rest stiffener

(b) M&L for removing the unserviceable PVC shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for preparation of old decorated / new replaced parts /surface of wooden furniture smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed and as shown in drawing and as directed.

Chair dinning with PVC Seat (FD/E6/MAP/05)

(a) M&L for removing the following unserviceable components of chair dining and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rails

(iv) Rear rails

(v) Front rails

(vi) Bottom stiffener

(vii) Rest stiffener

(b) M&L for removing the unserviceable PVC shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for removing the unserviceable/broken PVC seat by supply and fixing new PVC seat in one piece. Make : Amco or equivalent as approved by GE.

(d) M&L for preparation of old decorated / new replaced parts /surface of chair dining (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed and as shown in drawing and as directed.

Chair dinning high back with cushioned (C3/MEC/SP/201/193)

(a) M&L for removing the following unserviceable components of chair dining and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rails

(iv) Front rails

(v) Rear rails

(b) M&L for removing the unserviceable PVC shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for removing old unserviceable seat and back cushion of chair dinning and replacing the same by S&F of new 75 mm thick cushion 32 density of make : sleep well / Kurlon duly upholestered / covered with new tapestry cloth of superior quality not less then Rs 350/- per metre with seat ply BWP grade for seat all as specified and directed.

(d) M&L for removing old tapestry cloth from cushion of chair dinning and replacing the same by S&F of new tapestry cloth of superior quality not less than Rs 350/- per meter as approved.

(e) M&L for preparation of old decorated / new replaced parts /surface of chair dining (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair dinning with cushion (FD/E6/MAP/10R, FD/E6/MAP-II/04)

(a) M&L for removing the following unserviceable components of chair dining and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rails

(iv) Front rails

(v) Rear rails

(vi) Bottom stiffener(side)

(vii) Back rest vertical strip

(b) M&L for removing the unserviceable cushioned seat and S & F new seat top of chair dinning with 75mm thick 32 density foam covered with tapestry cloth not less than Rs 350/- per meter as approved on seat of 12 mm commercial plywood BWP grade of make : Green ply / Century Ply including tightening of frame work all as shown on drawing.

(c) M&L for removing the unserviceable PVC shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(d) M&L for removing old tapestry cloth from cushion of chair dinning and covered with new tapestry cloth of superior quality not less than Rs.350 per metre as approved and as shown on drawing

(e) M&L for preparation of old decorated / new replaced parts /surface of chair dinnig (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed and as shown in drawing and as directed.

Chair easy (FD 1108)

(a) M&L for removing the following unserviceable components of chair easy and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side seat rails

(iv) Rear seat rails

(v) Front seat rails

(vi) Back rest side rail of back frame

(vii) Back rest upper rail of back frame

(viii) Back rest rail lower of back frame

(ix) Arms rest

(b) M&L for removing the unserviceable PVC shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for preparation of old decorated / new replaced parts /surface of chair easy (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed and as shown in drawing and as directed.

Chair easy (FD 229)

(a) M&L for removing the following unserviceable components of chair easy and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side seat rails

(iv) Rear seat rails

(v) Front seat rails

(vi) Back rest side rail

(vii) Back rest upper rail of back frame

(viii) Back rest rail lower of back frame

(ix) Arms rest

(b) M&L for removing the unserviceable PVC shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for preparation of old decorated / new replaced parts /surface of chair easy (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed and as shown in drawing and as directed.

Chair easy type A (C3/MEC/SP/209/MO/9, C3/MEC/SP/209/SO/5, MEC 2915)

(a) M&L for removing the following unserviceable components of chair easy and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Front seat rails

(iv) Side seat rails

(v) Rear seat rails

(vi) Back rest rail side

(vii) Back rest rail lower

(viii) Back rest rail upper

(ix) Arms rest

(b) M&L for removing the unserviceable PVC shoes of chair easy and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c)M&L for preparation of old decorated / new replaced parts /surface of chair easy (wooden furniture) smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed and as shown in drawing and as directed.

Chair revolving with cushioned seat & back (MEC 2942 MEC 2941 FD/E6/MAP/01, TP)

(a) M & L for removing old unserviceable Gas Lifter/hydraulic assembly by S & F new gas lift/hydraulic assembly inculding tighting the frame work etc all as specified and as directed. Model No CH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T, PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(b) M & L for removing old unserviceable Gas Lifter Knob by S & F new gas lift knob assembly including tighting the frame work etc all as specified and as directed. Model No CH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T, PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(c) M & L for removing old unserviceable Poly Urathene Arm rest by S & F new arm rest of superior quality including nut and bolts all as specified and as directed. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(d) M & L for removing unserviceable pedestal assy by S & F new pedestal assembly including tighting the frame work all as specified and as directed. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(e) M & L for removing unserviceable castor wheel by S & F new castor wheel of superior quality including tighting the frame work all as specified and as directed. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(f) M&L for removing old seat cover cloth and provide new tapestry cloth as approved not less then Rs 350/- per metre for seat and back of superior quality as specified and as directed. Drg No PCH-7000/1/2/3,PCH-9101R, MEC-2941

Chair Varandah (FD 256)

(a) M&L for removing old unserviceable cane / newar from chair varandah and recanning with approved quality of cane plastic 2mm/3mm half round wide in godrej pattern all as specified and as directed.

(b) M&L for removing the unserviceable rubber shoe by S&F new rubber shoe of superior quality as shown on drawing.

(d) M&L for preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coats of synthetic enamel paint white colour with spray gun complete all as specified and as directed.

Chair Varandah(FD 256)

(a) M & L for removing PVC seat and back of chair varandah by providing new 4mm thick seat & back made out of PVC moulded alongwith 4 x 10mm ribs provided at all around the outer edge & around the grooves as shown on drawing. Make : Amco or equivalent as approved by GE

(b) M&L removing the unserviceable/broken rubber shoe by providing new one of superior quality as shown on drawing.

(c) M&L for preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coats of synthetic enamel paint white colour by spray gun complete all as specified and as directed.

Chair Varandah(FD/E6/MAP/11)

(a) M&L for preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coats of synthetic enamel paint black colour by spray gun complete all as specified and as directed.

(b) M&L for removing the unserviceable/broken rubber shoe by providing new one of superior quality as shown on drawing.

Chair School with hand board (FD/E6/MAP/05)

(a) M & L for removing of unserviceable old 18mm thick prelaminated particle board openable and S&F new 18/19mm thick prelaminated particle board one side with decorative choice lamination and other side balancing white lamination, exterior grade and 4mm thick PVC edging alround to particle board and fixing to school chair with hand board complete all as specified and as shown on drawing

(b) M&L for preparation of steel surfaces of chair school by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coats of synthetic enamel paint black colour by spray gun complete all as specified and as directed.

Chair writing / Chair Dinning/ Chair Easy / Chair CB with arms / Chair CB with out Arms(MEC 181, C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8, FD 280 , FD 279, FD 1108, FD 229, C3/MEC/SP/209/MO/9, C3/MEC/SP/209/SO/5, MEC 2915, MEC 2934, FD 75M)

(a) M & L for removing old unserviceable cane of chair recannning with approved quality of cane plastic 2mm / 3mm half round wide in Godrej pattern complete all as specified and as directed by Engr-in-Charge.

Rao Sales and service

Mahesh Traders

SAIRAM INDUSTRIES