Complete rewiring of Tempo Club Ghugus SA and complete rewiring blocks main wiring and providing earthing for different types of quarters at Ghugus township Wani Area under MISSION SEHAT during the year 2024-25.

Amount

The bidder to quote rates excluding GST. The bidders may note this while bidding for this tender.

1-9-17 Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG PW/SW (Material +Labour)

1-9-13 Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW (Material +Labour)

1-3-4 Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG?MA/BW (Material +Labour)

1-3-4 Supplying & erecting earth wire for mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW. Earth wire should be of green colour (Material +Labour)

1-2-11 Supplying and erecting PVC trunking (PVC casing-n?capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON..(Material +Labour)

1-4-5 Supplying and erecting mains with ISI mark WP 3 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.(Material +Labour)

1-2-7 Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (Material + Labour)

2-1-5 Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete (Material +Labour)

5-4-1 Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 poles on iron / GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB (Material +Labour)

5-3-26 Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board complete. (Material +Labour)

5-3-3 Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW?SWR/MCB (Material +Labour)

2-1-11 Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete(Material +Labour)

9-1-4 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA?EP (Material +Labour)

1-8-23 Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required. (Material +Labour)

1-8-28 Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 modules duly erected.(Material +Labour)

1-8-2 Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.(Material + Labour)

1-8-11 Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (Material +Labour)

5-3-20 Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete. (Material + Labour)

1-9-16 Point wiring in PVC trunking (casing-capping) with 1.5 sq. mm (2+1E) FR grade copper wire, flush type switch,earthing and required accessories. (Material + Labour)

1-7-2 Supplying and erecting One/Two way piano type switch 6A . /bell push erected on filled polypropylene board or double polished wooden board/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected (Material + Labour)

1-7-4 Supplying and erecting shockproof piano type switch 250 V 16A, erected on filled polypropylene board or polished double wooden/ folded or screwed board with top of either wooden/ 3mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick minate with S M screws and duly connected. (Material + Labour)

1-7-6 Supplying and erecting shockproof 3 pin plug socket 16A with porcelain base/ flush type erected on filled polypropylene ISI marked (IS:14772-2000) board or polished thick varnished double wooden block / folded or screwed board with top of either wooden/3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Laminate with S M screws and duly connected.(Material + labour)

1-6-1 Supplying & erecting mains 2x1.5 sq.mm . and earth wire 1.5 sq.mm FR PVC copper wire, ISI mark HMS PVC conduit min. 20 mm dia, as per specification No: WG-MA/PC (Material + labour)

1-6-3 Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FR PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WG-MA/PC (Material + labour)

1-7-7 Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box (Material + labour)

2-13-9 Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. (Material + labour)

5-3-3 Supplying, erecting & marking SPMCB 6A to 32A, B series (for lighting) in provided distribution board as per specification no. SWSWR/MCB (Material + labour)

5-3-7 Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SWSWR/MCB (Material + labour)

5-6-1 Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/25A complete as per specification no. SWRCCB/RCCB (Material + labour)

5-6-2 Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40 A complete as per specification no. SWRCCB/RCCB (Material + labour)

5-6-3 Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63 A complete as per specification no. SWRCCB/RCCB (Material + labour)

5-2-1 Supplying and erecting metal clad distribution board 240V, 2 way, 16A per way & neutral bar connector complete erected on iron / GI frame as per specification no. SW-SWR/ MDB (Material + labour)

5-2-3 Supplying and erecting metal clad distribution board 240V, 4 way, 16A per way & neutral bar connector complete erected on iron / GI frame as per specification no. SW-SWR/ MDB (Material + labour)

5-2-4 Supplying and erecting metal clad distribution board 240V , 8 way, 16A per way & neutral bar connector complete erected on iron / GI frame as per specification no. SW-SWR/ MDB (Material + labour)

5-4-14 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 poles for incoming and 2 poles for outgoing SPMCB s on iron/ GI frame as per specification no. SW-SWR/ MCBDB (Material + labour)

2-1-5 Supplying and erecting LED square / circular 16 to 20W down lighter having pressure diecast aluminium housing, opal transslucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete (Material + labour).

Total impact of GST for the purpose of CTC