REPAIRS TO HARDSTANDING FIRE BREAKS DRAIN AND MISC WORKS OF CERTAIN SHEDS AT 29 FAD AREA UNDER AGE BR EAST AT GE DEHU ROAD

Amount

Demolition brick or stone masonry built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M&L for brick work with sub class 'B' old size brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

.-Ditto- As item no.2 above but Except bricks

Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

Demolition of precast PCC block walling built in cement mortar including all quioins, arches, pillars, etc.

M & L for pre cast Solid block masonry with design mix solid blocks of grade C5,masonry exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for providing pre cast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in cover slabs. complete all as directed by Engr-in-charge.

M & L for 15 mm thick cement plaster on brick wall in cement morat 1:4, finishing the surface even and smooth without using extra cement complete.

Preparation of newly plastered surface and appling two coats of cement base paint on walls complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete in ground floor & paving n.exc 15 cm thick etc.,complete all as specified.

M/L for PCC 1:4:8 type D2 (40 mm graded stone aggregate ) 75mm thick as in sub base.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over and including 30mm thick sand layer spreading all as specified.

M/L for Chequered Cement Concrete Tiles 25 CM x 25 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over and including screed bed 15 mm thick in CM 1:6.

M/L for Chequered Cement Concrete (reflactive rubber moulded) Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over and including screed bed 15 mm thick in CM 1:6.

M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed blocks/coping/ edging all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg.) as in plinth protection 75 mm thick finished top surface even and smooth with out using extra cement

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed.

M&L for cement conceret 1:3:6 Type C-2 Using 40 mm graded stone aggregate as in surface channel and drain bed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M & L for 150 mm thick Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified

Finishing surface of concrete roads, pavements etc by belting/brooming complete all as specified and directed.

M & L for forming 12 mm thick expansion joints 150 mm deep, filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

M&L for 450 mm bore Reinforced concrete pipes class NP3, laid and jointed complete with collars laid in trenches and jointed all as specified including demolition of existing pipe .

M&L for 600 mm bore Reinforced concrete pipes class NP3, laid and jointed complete with collars laid in trenches and jointed all as specified including demolition of existing pipe .

M& L for PCC 1:4:8 type D2, (using 40mm graded stone aggregate) as in bed to drain pipe of 450mm bore including forming cradles after they are laid and tested for 450mm dia pipes complete all as specified and ditected by Engr-in-Charge.

M& L for PCC 1:4:8 type D2, (using 40mm graded stone aggregate) as in bed to drain pipe of 600mm bore including forming cradles after they are laid and tested for 450mm dia pipes complete all as specified and ditected by Engr-in-Charge.