GES/PKT/73/2025-26 REPAIR/ MAINT TO COMPOUND WALL, GATES, FENCING, HARDSTANDING, FOOTHPATH AND MISC B/R WORK IN DHANGU MIL COMPLEX UNDER GE SOUTH PATHANKOT

Amount

Dismantling RCC posts and struts any section including taking out embedded portion in natural ground and making good disturbed surface complete all as specified and directed.

S&F of Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde-E-165 complete all as specified & directed.

S&F in repair Galvanised, (hot dip) 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed (each line wire to be measured).

M&L PCC 1:3:6, type C-2, (using 40mm broken graded crushed stone aggregate) in foundation filling and mass concrete, complete all as specified and directed

Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply only Chain link MS galvanised fencing of wire mesh size 50 mm x 50 (Nominal pitch of wires), complete all as specified and directed.

Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

S&F of MS round bar 10 mm dia as in strands for holding chain link fencing incl hooking etc complete all as specified and directed.

Excavation in post holes not exceeding 0.50 cum getting out in Hard/dense soil, returning,filling in layers not exceeding 50 mtr and making good surfaces complete all as specified and directed.

S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 5 to 10 mm diameter of shank, complete all as specified and directed.

M&L for Concetrina coil securing or tying incl provn of MS wire stapples or steel pins etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.

Dismantling timber scantling inc old wooden trusses, 40sqcm and over in section in any position complete all as specified and directed.

M&L for steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) Forming holes with riveted, bolted, or welded attachments complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L for Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with selg taping screws complete all as specified and directed.

M&L for pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws complete all as specified and directed.

Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed.

S&F of machine pressed precast concrete interlocking paver blocks with grey cement and pigment, any shape and size conforming to IS 15658:2006 of 80 mm thickness M35 grade complete all as specified and directed.

S&F of machine pressed precast concrete interlocking paver blocks with grey cement and pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed.

S&F of machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for Cement concrete 75mm thick type D-2 1:4:8 as in sub base/sub floors of tiles/blocks complete all as specified and directed.

M&L for Chequered cement concrete coloured tiles 300mm x 300 mm x 25 mm thick table vibrated set, jointed and pointed in neat cement slurry with grey pigment cement and pigments as in floor over and including screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed

M&L for 100mm thick plain cement concrete 1:2:4 type B-1 ( using 20mm crushed stone agg ) as in floors ,ramps,hard standing or as in similar work finished even and smooth without using extra cement including form work where required all as specifed and directed .

M&L 50mm thick PCC, type C-1, 1:3:6, ( using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded aggregates louvres and jallies, 50mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4.complete all as specifed and directed.

M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 includind demolition/dismantling old surface/tiles complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces including scaffolding upto 7 mtr height and curing the surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall including cornices plasters and applying two coat of cement base paint over a coat of primer on newly plastered surface of wall and curing after applying each coat upto 7 mtr height complete all as specified & directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/L and UC resistance as per IS 15489:2004 alkali and fungal resistance, dust resistance, water repellant, crack-bridging, weather proof 1st quality exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 L/10 Sqm and including priming coat of exterior primer applied @ 0.90L/10 Sqm including preparation of new plastered surface of walls and scaffolding at any height complete all as specified and directed by Engr-in-Charge. Note : - Tint/Shade shall be approved by Engr-in-Charge.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and curing the surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall including cornices plasters and applying two coat of oil bound distemper over a coat of primer on wall complete all as specified & directed.

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed.

All as per description of item 39 above but except bricks complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Supply and fixing in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, cattle trap and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.50 Sqm and n. exc 4 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S&F of Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life.

S&F of Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F of 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F of 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed.

S&F of 100mm long butt hinges medium weight cold rolled ISI marked aluminium complete all as specified and directed.

S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe complete all as specified and directed

Dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site ,S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethylene float and fly nuts complete all as specified and directed.

Dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing from site, S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethylene float and fly nuts complete all as specified and directed.

Dismantling of wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises including M&L for providing glazed ceramic coloured wall tiles of exterior quality of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises including M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per serial item No. 55 here-in-above but in vertical surface, skirting complete all as spd and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off permises, M&L vitrified tiles 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

All as per serial item No. 57 here-in-above but in vertical surface, skirting complete all as spd and directed.

Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe,S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length complete all as specified and directed.

Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe,S&F in repair15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls complete all as specified and directed.

S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair for Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat cover white colour or in matching colour with closet closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 110mm bore PVC 'P' or 'S' trap complete incl making good to floor complete all as specifed and directed.

Demolition of cement concrete unreinforced of any description in any position not otherwise specifically provided for complete all as specified and directed

S&F in repair vitreous china wash hand basin (flate back or angle back type) of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed.

S&F in repairs 10 litres PVC low level flushing cistern syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.

S&F of grating round 125 mm size of PTMT (minium weight 50gms) as in repair, complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified & directed.

S&F in repairs 15mm bore Angle valve fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair pillar tap chromium plated fancy type Swan Neck with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repairs chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

Supply & fixing in repair health faucet with 15mm 1.25mtr long flexible tube chrome finish & wall hook for water closet fixed with and incl CP screws complete all as specified and directed.

Dismantling/ taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed.

S&F of 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficent number of Iron stack clamp complete all as specified and directed.

S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.

S&F for 110mm bore pipes, PVC (SWR) bends any radius with access doors fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4), complete all as specified and directed.

M&L for cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repair Brass Chromium Plated wall mixture valve cast copper alloy fancy type for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

Supplied and fixed in repairs Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed

M&L for preparation of old concrete surfaces/ kerb stones by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying two coats of floor paint, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washer and waste including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F in repair 32mm bore corrugated PVC waste pipe complete all as specified and directed.

S&F in repair stop valve concealed, fancy type, long shank and cup ISI marked brass chromium plated with crutch or butter fly handle screwed both ends for iron pipe or for union of 15mm bore complete all as specified & directed.

M&L for Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs,shelves nd similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specifed and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded aggregates) as in surface channels and drains including formwork complete all as spd and directed.

M&L for preparation of old surface of floor by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots and removing all loose material etc and applying two coat of exterior emulsion paint as in floor (MING RED COLOUR) complete all as specified and directed.

S&F plastic dividing strip 1.5 mm thick and 38mm wide fixed to design complete all as specified and directed by Engr-in-Charge.

S&F in repair welded steel wire fabric fixed to wood/steel members fixed to frames at site (weight/sqm not exc 4.00kg/sqm) complete all as specified and directed.

Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. (ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

M/S CHAMAN LAL GUPTA (BID ID -3497304)

jagdambe traders (BID ID -3496896)

BUILDEX CONSTRUCTION CO (BID ID -3495619)

D R CONTRACTORS (BID ID -3497111)