REPAIR/MAINT TO ROOF SHEET FALSE CEILING BRICK WORK PERIODICAL SERVICES AND MISC B/R WORKS AT COMD HOSP (CC) UNDER GE (E/M) LUCKNOW

Amount

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated/plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing roof sheet/roof tiles of any discription complete

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling timber scantling 40 sqcm and over in section in any position.

M & L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Grade Fe- 290 (Gde E- 165) incl. welding, rivets or bolt & nut complete all as specified and directed by EIC

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, any position including cover fillets.

M & L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed

M & L for Anodised aluminium/powder coated snap grid frame work (including hanging wires as per manufactures instructions) for false ceiling (size of grid 605mm x 605mm) all as specified

M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed by EIC

Taking down chowkhats or frame (wooden/aluminium/PVC) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit all as specified and directed.

Taking down chowkhats or frames (wooden/aluminium/PVC) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each all as specified and directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

S&F Anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes in 2 shutters and 0.46mm dia SS wiremesh in one shutter complete all as specified and as directed (thickness of aluminium section min 2mm)

S&F powder coated aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes in 2 shutters and 0.46mm dia SS wiremesh in one shutter complete all as specified and as directed

S &F powder coated aluminium partition (2mm thick with min 40mm square tube) with pre-laminated particle board at bottom panel and 4mm thick glass on top panel incl glazing clip and neosprene rubber beading as as specified and directed including dismantling of old unserviceable aluminium partition

S&F aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double/single leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, tinted glass panes 4.8 mm nominal thickness, 100mm butt hinges (3 Nos in each panel), 150mm tower bolt (1 in each panel), locking arrangements with 100 mortice lock complete all as specified and as directed.

S & F in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M & L for Mild steel work Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as in small articles like angle iron framing work for manhole, rungs/steps in man hole

M & L for Treating small articles of steel like MS rungs etc with coal tar black paint icl preparation of surface, area tarred not exc 0.1 sqm

M & L for PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening as specified

S &F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm with stuck inside with

S&F plain solid, strainght chowkhats & frames of 2nd class HW Hollock wrought, framed rebated on the solid,rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkat & treated with coal tar complete all as specified

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

S&F 125mm size Extruded aluminium alloy handles, fabricated type, anodised complete.

S&F in repair 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.

S&F in repair 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified.

S&F in repair 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

S&F in repair 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

S&F in repair 125mm size Extruded aluminium alloy handles, fabricated type, anodised complete.

S & F for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading/aluminium beading nexc 0.5 Sqm each pane

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty/wooden beading/aluminium beading nexc 0.5 Sqm each pane

S&f for 4.8 mm thick sheet glass odinary qulity and glazing with oil putty/wooden beading/aluminium beading exc 0.5 Sqm each pane

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in- Charge. (Note:- floor spring will be suitable for toughtned glass door upto 1.25 m wide shtters)

Repairing of existing aluminium door single/double leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including repair and refixing of joinits of any membre of aluminium section i.e frame & shutters membre and making t he door and shutter serviceable complete all as specified.(Note:-Floor door springs & door closer where changed shall be measured and paid separately under appropriate items

Repairing of existing toughend glass door single leaf including oiling and greasing of floor springs, repair replacement of handle and locking arrangements and making the door and shutter serviceable complete all as specified.(Floor door springs & door closerwhere renewed shall not be measured & paid seperately it includes the rate of floor spring also)

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size of brass body

Dismantling floor, stone flooring, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises

M&L 18-20mm thick machine cut Kota stone slab flooring with marble stone strips/ slab/ tiles as per design approved, over and including cement screed bed 20mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete

M&L 18-20mm thick machine cut Kota stone slab as in skirting /riser over and including cement screed bed 10mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed in CM 1:6

M&L Vitrified ceramic tiles 8-10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over and including 15 mm thick screeding in CM 1:6

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 20mm thick in cement mortor 1:4

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 300 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10mm thick screed in CM 1:3

M & L for precast cement concrete Type B0,1:2:4 (using 12.5mm graded stone aggregates) louvres and jallies, 25mm thick (measured solid), including all mouldings and set in CM 1:4 complete all as specified and directed

M & L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in coping, chajja, facia and the like including weathering, slightly rounded or chamfered angles with & incl necessary use and waste of form work for fair faces of concrete

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water all as specified and directed.

15mm thick rendering on brick work or concrete surfaces in CM 1:4 finished fair & even without extra cement, cement mortar mixed with WPC @ 3% of weight of cement Note: WPC measured & paid for separately

M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even

M&L rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

Supply only integral water proofing compound powder ISI marked

Preparation of new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying two coat of synthetic enamel paint over a coat of pink primer all as specified.

Preparation of new steel and iron based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

Preparation of newly plastered surfaces of walls and applying two coat of cement base paint of any tint/shade all as specified.

Preparation of newly plastered/unplastered surfaces of walls/ceiling and applying two coat of distemper oil emulsion of any tint/shade over and including a coat of white wall care putty complete all as specified. (Note:- Wall care putty measured and paid seperately under appropariate item)

Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint all as specified.

Preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash all as specified

All as per item No. 65 above but on ceiling.

Preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint/shade all as specified.

Preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint/shade all as specified.

All as per item No 68 above but on ceiling.

Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint all as specified.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 15m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures)

M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Primer and emmulsion to be carried out through air less spray machine ( Mechanical means) (Note:- Rate included for necessary scaffolding and arrangments for working upto 15m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures)

M & L for Super heavy series PVC Wall panelling consisting of 5mm thick (hollow) Plain/wood colour PVC sheet as approved including complete fixing arrangments on wall/ceiling of including dismantling of unserviceable existing wall panelling complete all as per manufactures specifications of Make Polywood or equivalent of other make.

abhinish traders

M/S SWATI CONSTRUCTION

M/s Vimal Traders

M/S Reliance Construction

M/s SNS Construction

DEVANSHI INFRATECH

M/s Bajpai Constructions

m/s raghubar dayal