Repair and fabrication work of four pumps SCT 200and58.2, MandP EST 200by250, SCT 200x48.2 and KBL UP 150by56 being used for the purpose of dewatering, firefighting and sprinkling purpose at Kaniha OCP, Kaniha Area.

Amount

Cost of complete disassembling of the pump by dismantling of the upper casing coupling guard, bearing, sleeve, neck ring, shaft, impeller etc . of the SCT 200x58.2 pump of Kaniha OCP

Welding of bearing cartridge and bearing and bearing seating position by deposition of material and machining on the bearing cartridge after deposition on the worn-out to bring required size; for SCT 200/58.2.

Repairing of the pump shaft by repairing the stainless steel on the shaft and machining on the shaft to bring the required shape & size of the shaft and also key way cutting on the shaft of SCT 200x58/2 Pump; for SCT 200/58.2.

Making of Neck ring of required shape & size of SCT 200x58.2 Pump.

Fabrication of Gun Metal Sleeve of SCT 200/58.2 Kirloskar Pump.

Repairing of Worn-out Bearing cover seating area & Neck ring seating position by depositing metal on worn-out position of the casing and neck ring position; for SCT 200/58.2.

Complete fitting after checking & proper positioning of all fitting with shaft ,sleeve & refitting of same after rectification of SCT 200 x58.2 pump of Kaniha OCP. The estimated cost will consist of cost of material (02 Nos. of 7218 Bearing, 01 nos. of 6218 2RSR Bearing, 01 piece gasket, 16 set of HT (M20x80) Nut & Bolt, 5 m of 05 mm size O Ring, 01 Set of Cooling pipe with adaptor, 02 Pc of Anabond) and labour charges.

Complete disassembling of the pump by disassembling the upper & lower casing & dismantling of complete rotating assly. by removal of sleeve, neck ring, shaft & impeller of M&P EST 200/250.

Fabrication , Machining, fitting of Gun Metal sleeve with proper alignment of Sleeve; For M&P EST 200/250.

Fabrication, Machining of Gun metal neck ring with proper alignment of Neck rin; For M&P EST 200/250.

Repairing of Impeller by metal depositing on neck ring seating position; ForM&P EST 200/250.

Repairing of Casing by Metal depositing on neck ring seating position & bearing housing seating position of pump; ForM&P EST 200/250..

Welding of bearing cartridge and bearing seating position by deposition of material & machining on the bearing cartridge after deposition on the worn-out to required size for Pump; ForM&P EST 200/250.

Complete fitting after checking & proper positioning of all fitting with shaft ,sleeve & refitting of same after rectification of M&P EST 200/250. pump of Kaniha OCP. The estimated cost will consist of cost of material (02 Nos. of 6314- 2RSR Bearing, 01 piece gasket, 02 Pc of Anabond) and labour charges.

Complete disassembling of the pump by disassembling the upper & lower casing & dismantling of complete rotating unit by removal of sleeve, neck ring, shaft and impeller etc,; for SCT 200x48-2.

Fabrication, Machining, fitting of Gun Metal sleeve with proper alignment of Sleeve for SCT 200x48-2 pump

Fabrication, Machining of Gun metal neck ring with proper alignment of Neck ring; for SCT 200x48-2

Welding of Impeller by metal deposition and machining on key-way position & casing wear position; forSCT 200x48-2.

Welding of Shaft by metal deposition and machining on worn-out position; for SCT 200x48-2

Welding of bearing cartridge and bearing seating position by deposition of material & machining on the bearing cartridge after deposition on the worn-out to required size for SCT 200x48-2 pump

Complete fitting after checking & proper positioning of all fitting with shaft, sleeve & refitting of same after rectification of SCT 200 x58.2 pump of Kaniha OCP. Estimated cost consist of cost of material (03 Nos. of 6312 Z C3 Bearing, 01 piece gasket, 16 set of HT (M24x90) Nut & Bolt, 5 m of 05 mm size O Ring, 01 Set of Cooling pipe with adaptor, 02 Pc of Anabond 666) and labour charges, for SCT 200/48.2.

Cost of complete disassembling of the pump by dismantling of the upper casing coupling guard, bearing etc . of the UP 150/56 pump of Kaniha OCP.

Welding of bearing cartridge and bearing and bearing seating position by deposition of material and machining on the bearing cartridge after deposition on the worn-out to bring required size; for UP 150/56.

Making of Neck ring of KBL UP 150/56 Pump.

Fabrication of Gun Metal Sleeve of the pum; for UP 150/56

Complete fitting after checking & proper positioning of all fitting with shaft ,sleeve & refitting of same after rectification of UP 150/56 pump of Kaniha OCP. The estimated cost consist of cost of material (02 Nos. of 7312 B-XL-MP Bearing, 01 nos. of 6312-Z-C3 Bearing, 01 piece gasket, 16 set of HT (M20x80) Nut & Bolt, 5 m of 05 mm size O Ring, 01 Set of Cooling pipe with adaptor, 02 Pc of Anabond) and labour charges.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

PANKAJ ENGINEERING ENTERPRISES (BID ID -1151798)

DILLIP KUMAR SAHOO (BID ID -1152487)

M/S CHANDRASEKHAR ENGINEERING AND SERVICES (BID ID -1152382)