Erode Dt Lakkampatti tp 15th finance tied grant 2022-23 Removal of exsiting handpump erection of submercible pumpset and drilling of new borewell

Amount

Removal of deep well hand pumps from borewell etc., complete complying with standard specification.

Rate for flushing of borewell of 6" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by 'V' notch method if required.

Geophysical survey charges for locating the point etc., complete complying with standard specification.

Drilling of 150mm dia deep bore well including all labour charges and transport and hire charges for all machinery and rods and plants etc., complete as per standard specification.

Supply and delivery of 200mm dia PVC plain casing pipe (CS) including cost and conveyance of materials and labour charges etc., as per standard specification.

Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board etc., as per standard specification.

Supply and delivery of 2HP SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITHOUT PANEL BOARD etc., complete as per standard specification.

Supply and delivery of 1HP SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITHOUT PANEL BOARD etc., complete as per standard specification.

Supply and delivery of 4 sq.mm 3 core flat copper cable wire etc., complete as per standard specification.

Supply and fixing of 32mm UPVSC coupler type pipe including cost and materials etc., complete as per specification.

Supply and fixing of Single phase panel Board with two level guard with Auto start for submersible pumpset inlcuding cost and conveyance of material and labour charges etc., complete as per standard specification.

Supply and fixing of Single phase panel Board with two level guard with Auto start for submersible pumpset inlcuding cost and conveyance of material and labour charges etc., complete as per standard specification.

Supply and delivery of Following HDPE Sintex tank, G.I. Pipe, PVC Pipe and its Specials etc., complete as per standard specification. A)32mm dia GI pipe

B) 25mm dia GI pipe

c) 32mm G.I. Coupling

d) 32mm G.I. Elbow

e ) 32mm G.I. Tee

f) 25mm G.I. Coupling

g)25mm G.I. Elbow

h)25mm G.I. Tee

i)150mm M.S.Clamp set

j)150mm Bore Cover

k)32mm G.I. Gate valve

l)20mm G.I.Tap

m)2000Litre HDPE tank

Labour charges for the errection of submersible pump set with bore well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps and erection of panel board consisting of TPICN switch starter voltmeter Ammeter three pilot (indicating) lamps capacitor, single phasing preventor, water level guard and laying and jointing the cable and twin earthing as per I.E. rules etc., Complete and testing the pump set and trail run for 10days etc., complete.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains.SD 65

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains.SD 70

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD 125

Supply and fixing of 25 Amps 30 MA RCCB/ELCB inculding cost of labour charges and siutable MCB box with internal coneection etc.., as per standard specfication.

Supply and fixing of FUSE UNITS (ANCHOR/EQUIVALENT), 32Amps porcelain fuse unit(500V) as per standard specfication.

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., complete complying with std. specifications.

Lowering PVC rigid/GI pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including cost and conveyence of all meterials to work site etc complete s per standard specification. A) 32mm dia GI pipe

b) 25mm dia GI pipe

Construction of Tank Bed Platform and Plain Cement concrete 1:4:8 mix ( one cement and four sand and eight aggregate ) using 40mm broken metal and constructing Brick work masonary in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry and platform size of 150x150x150cm and plastering with cement mortar 1:5 mix and Painting the new walls two coats over one coat of priming with best Emulsion paint and Brick platform for water tap connection etc.,including cost and conveyance of all materials to site labour charges etc., complete.

V B N BUILDERRS