Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LAccepted-Finance | L1 | Accepted-Finance L1 Bidder | |
| 2 | L2₹6.1 L+₹21,087.40 (3.59%)Rejected-Finance | L2 | Rejected-Finance L2 Bidder | |
| 3 | L3₹6.3 L+₹44,047.40 (7.49%)Rejected-Finance CHENAB VALLEY DIVISION HPPWD UDAIPUR HIMACHAL PRADESH | CHAMBA | HIMACHAL PRADESH | 176207 | L3 | Rejected-Finance L3 Bidder |
Tender Value
₹5.9 L
EMD Value
₹11,800
Closing Date
14 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Shimla Rural Division HPPWD Dhami
SH - C/O Shad in School.
2022_PWD_61483_8
PW-SRDD-CB-CTR-2022-5428-77 dt. 24-05-2022
Open Tender
Civil Works - Buildings
Item Rate
30 days
Dhami
as per tender documents
12 documents required · 12 mandatory
₹500
₹11,800
10 Aug 2022
8 Jun 2022
15 Jun 2022
8 Jun 2022
14 Jun 2022
8 Jun 2022
Amount
Excavation in foundation trenches etc. In earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock ( where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and and directed by the engineer- in charge at site., according to the HPPWD. specification of 1990 ( one thousand nine hundred ninety) volume-1 (one) and sorting out useful and unuseful materials and transportation of the unuseful materials for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in - charge through all modes of transportation including head load animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required) All useful materials such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation.Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinth as required complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge
Providing and laying cement concrete 1:3:6(1 Cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size) mechnical mixed and curing complete including cost of centring and shuttering in Foundation and plinthas required complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
Steel work welded in built up sections/ framed work,including hollow section including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge
P/F steel welded wire mesh (50X50) mm including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of materials up to all leads and lifts and as per the direction of the Engineer in Charge.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. and as per the direction of Engineer-in-Charge
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge
Ridges plain (600mm)
Valley plain(upto 600 mm)
Flashing/ Aprons (Upto 400mm)
Gutter 300 mm wide (900 mm over all girth)
Providing and Laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in .including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge: in cement (1:6)
15 mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth in Cement Mortar 1:4 ( 1cement : 4 Sand) including carriage of materials within allleads and lifts. and as per the direction of Engineer-in-Charge.
15 mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials within allleads and lifts. and as per the direction of Engineer-in-Charge. in (C.M. 1:6)
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge 150 mm dia
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge
150 mm dia door bend
150 mm plain Shoe
Providing and laying mirror polished Kota stone slab of size 55x55 CM in flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge:
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
SUBHASH
LALIT KUMAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .