GE/C-27/2024-25 PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Taking down chowkats or frames exc. 1.5sqm but n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.

S&F solid PVC door frame of sixe 50mmx47mm made out of 5mm single side prelem PVC sheet reinforced with MS square tube in opening as per specification and drawing.

S&F factory made solid PVC moulded Door shutter 28 - 30mm thick (Stiles) with 2,4,6 raised panel design with 2mm thick moulded PVC sheet on the front and back face & 2mm thick moulded prelem PVC sheet on front and back face with wood free EPS, supplying and fixing in frame at site as per specification and dircted.

S&F 150mm stainless steel tower bolts of extruded section and fixed.

S&F 150mm stainless steel handles, cast type ,and pattern/design as approved.

Supply and Fix butt hinges, 100mm medium weight, cold rolled mild steel.

Supply and fixing Floor door stopper 140mm long of aluminium alloy and tongue, anodised with hard drawn steel spring fixed in floor etc complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

Taking down cement plaster of any description and material and labour for rendering 15mm thick in CM 1:4 laid to achieve slope with two coat of polymer modified waterproofing comound mixed (1:2) with cement slurry @500gm per sqm as per manufacturer instruction in sunken portion of toilets finished even and smooth without extra cement and applying a coat of hot blown bitumen 85/25 grade at the rate of 1:20 kg per sqm and applying one layer of 0.5mm thick fibre tissue and final layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out complete all as spcified and directed.

M&L for hardcore of broken bricks of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface in sunken portion all as directed and specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level).

M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in sub flooring.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6 .

All as per item No 14 above but as in skirting over rendering 10mm thick in cement mortar 1:4.

Dismantling floor, hearth or wall tiles including cement mortar concrete bedding amd removing rubbish off the premises complete all as specified and directed.

M&L for coloured ceramic tiles 600X300x 7 to 8mm thick, as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 all as directed.

M&L Green marble 16 to 20mm thick(table eubbed and polished) in steps, skirting, jams, pillars and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match shade incl edge moulding complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 finished even and fair.

M& L for applying two coats of oil bound distemper on new wall surface with roller brush complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered surface and applying of one oil bound distemper to old surfaces of walls complete all as specified and directed.

Taking down chowkats or frames n.exc. 1.5 Sqm (without taking off shutters from the frame).

S&F powder coated Anodiesed aluminium frame for partition, doors, windows, ventilators with one or more rebates incl. joining cleat for fixing etc. complete all as specified.

S&F powder coated Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors,Brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw with etc.

S&F powder coated not less than 50micron Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS :1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approved stadandered section and fixed to existing window frame with CP brass/stainless steel screws @200mm c/c, incl cutting the grill to proper opening size for ficing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium partition, door or window all as dircted.

S&F in repair vitreous China coloured European type WC (single piece)including connection to drain,'P' trap and fixing bolts ,plastic water closet seat cover complete all as specified.

Supply & fixing in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm with Pedestal including 32mm dia PVC flush pipe with coupling and set of brackets incl complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified.

Supply and fix in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified.

S&F in repair 15mm dia chromium plated wall mixer hot & cold L bend 3 IN 1 pattern fixing and connection to pipes complete all as directed.

S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified.

S&F in repairs CP Brass shower rose 125 mm size suitable for 15mm bore pipe complete all as specified.

S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S & F in repair cp health faucets with crutch or push handle, screwed down with 1.5mtr CP flexible pipe, screwed for pipe, 15mm dia, fancy type, cast copper alloy. Chromium plated long body complete all as speciifed.

S & F in repairs glass corner 300 mm radius of 10mm thick toughned glass with CP Brass railng, fixed with screws fancy type, complete all as specified.

S & Fixed in repair PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified.

S&F CP connection pipe of 15mmx 450mm with CP check nuts with washers, complete all as specified.

S&F in repair brass chromium plated toilet paper holder, complete all as specified.

S&F in repair brass chromium plated soap dish, complete all as specified.

S & F in repairs brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and directed.

S&F in repair stainless steel peg set of 06 peg, 45 centimeter long, complete all as specified.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation ,etc. and getting out in soft/loose soil complete all as specified and as directed.

M&L for P.C.C 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Returning, filling in, including spreading, levelling , watering, and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing excavated material (Soil) to a distance n. exc 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed.

M&L for 50 mm thick Cement Concrete M-15 Nominal Mix (using 20 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note: - Water proofing compound will be measured and paid separately.

Supply only water proofing compound (WPC).

M&L for 50 mm thick PCC 1:3:6 type C1(using mechanically crushed 20 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specifed and as directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6

M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface finished fair and even without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed. Notes for item No 59: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor before opening of (f) bid. (d) A guarantee amount of 5% of contract of work done for item No 59 of BOQ will be retained for 5 years of the completion of work.

M&L for new plaster surface two coat of oil bound destemper over 3mm thick of birla white putty including preparation of newly plastered surface etc all as specified.

M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in filling for lintel bands, lintels upto 1.5 metre span including necessary formwork complete all as specified & directed by Engineer-in- charge.

M&L for providing reinforced cement concrete 1:2:4 type B1 ( 20 mm graded stone aggregate) as chajja , shelves etc including necessary formwork complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hookingendsand binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165).

Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips conforming to Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165).

S& F MS framed work such as grills, gratings, door frame etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or Fe 165 complete all as specified and as directed.

S & F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides complete all as specified.

S&F 30mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I, section 8 clause 8.24(b).

S&F aluminium handle 125 mm long cast type, anodised complete fixed with steel screws complete all as specified and as directed by Engr-in-Charge.

S&F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

Anodised aluminium powder coated sliding windows, window shutters and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking system, suitable handle (1 no.) complete all as specified and as directed by Engineer-in- charge.

S&F anodised aluminium snap grade of size 600 X 600mm frame work for false ceiling including hangers 2.5mm dia G I (upto 1200mm length)suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm GI grid (frame work for ceiling shall be measured and paid seprately) all as specified.

S&F in repair PVC 18 mm thick PVC celluca ply one side prelam fixed with solvent cement adhesive and screws as in kitchen cabinet including dismentling boarding and finish stainless steel, width of flaps when open 30mm with suitable size steel screws complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings.

S&F 100mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified.

S&F magnet catches and striking plate including letting in and fixed, complete all as specified.

“S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket

S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified.

M&L for telescopy channels 22" long fixed in cupboard complete all as specified and as direct by Engineer in charge.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sq m but not exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L Glazed ceramic coloured tiles (400X300mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4.

M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge. Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account.

S&F 75mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints,fixed vetically on wall.

S&F PVC (SWR) floor traps 75mm bore and jointing to waste pipe in solvent cement alongwith CP grating .

Excavating in post holes each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceedings 25cm watering and removing surplus soil to distance n exc 50 m and making good surfac in soft/loose soils

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Mild steel rolled section or hollow pipes( square or round pipe) as in main and cross beam, hip and jack rafter, purlins or vertical post where connected to common rafter and running rails fixed with cleat or other connecting plates etc. complete all as specifed and directed.

S&Fsteel work as in flats, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew on fencing vertically complete all as specified and directed.

M&L, two coats of synthetic enamel paint to untreated surfaces of steel any width or girth not otherwise described over a coat of red oxide primer after preparation.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Sand filling under floors or in foundations incl. watering and consolidation.

M & L Machine pressed precast concrete PU coated colour interlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 80 mm thickness M-40 Grade complete all as specified.

M&L chequered cement concrete tiles 30cmx 30cmx 15mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6 .

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping to wall complete all as specifed and as directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface finished fair and even without using extra cement complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required including alu handle 150 mm ,tower bolt 150 mm ,floor spring heavy duty ,looking arrangement rubber gasket and door stopper complete all as specified and directed.

S & F mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc.

M&L RCC Design mix M-20 (Using 20mm graded stone aggregate) as in foundation including raft footings, foundation beams, plinth beam, basis for columns, pillars piers, post and struts etc, complete all as specified and as directed.( as per drawing attached).

M&L RCC Design mix M-20 (Using 20mm graded stone aggregate) as in columns, pillars piers, posts and struts etc. complete all as specified and as directed.(as per drawing attached) .

M&L RCC Design mix M-20 (Using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.(as per drawing attached).

M&L Formwork to sides of concrete foundations, footing, basis of coloumns , raft & raft beams,, sides & soffits of foundation & plinth beams and similar work vertical or to batter, fair finished surfaces of concrete complete all as specified and as directed.

M&L Formwork to Formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surfaces of concrete complete all as specified and as directed .

M & L for mild steel framed work framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (GdeE- 250) qualityA complete all as specified.

S & F Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. in posts and struts including cutting tops to shape as directed Fe-290(Gde E-165).

Material and Labour for applying Two or More coats of 100% premium acrylic emulsion paint (texture paint with design) having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified (colour and design will approved by user).

M&L for 50mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate in paving surfaces including finishing surface even & smooth .

M&L for Straight or Circular raking cutting Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc.including rubbed finish and good well surface all as specified and directed.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified.

S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and all as specified and directed by Engineer-in-Charge.

S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Supply only 3.15 mm dia galvanised steel chain link fencing, 100X100 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified.

Fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc. including provn of winding wire all as specified.

M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) for use in chain link fencing as wind tie all as specified.

Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by Engineer-in-Charge.

S & F in repair precast fibre reinforced cement concrete perforated drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1500mmx500mm x70 mm omplete all as specified and as directed.

M&L for 15mm thick screed bed in CM ( 1:6)

M&L point wiring concealed in the wall with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing in & including rigid PVC conduit with replacement of sunken terminal MS boxes thickness and 3 mm thick hylam sheet cover for terminal boxes for including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :-

One light/fan point controlled by one by one way switch ( switch to be measured and paid separtely)

One 3 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.

All as per Ser item No 119 (b) but Same board.

All as per item No 119 bove but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15/16 A socket outlet point on independent board complete all as specified and directed by Engineer in charge.

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.00 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified.

M&L switch Modular type 6 Amp SP one way ISI marked complete all as specified.

M&L switch Modular type type 16 Amp SP one way, ISI marked complete all as specified.

M&LModular type socket outlet 5 pin 6 Amp flush type, ISI marked complete all as specified.

M&L Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified.

M&L ceiling rose 3 phase PVC polycorbonate,isolated body, complete all as specified.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

M&L MCB SPN 40 Amp "B " curve, 10 kA complete all as specified.

M&L MCB SP 6 to 32 Amp "B" curve ,10 kA. complete all as specified.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level ≥ 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level ≥ 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and as directed.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.

S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

S & F water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 1.5 KW and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed .

M&L in replacement Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

S&F Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.

S&F 35 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 80lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of sutable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.

STRATO 2x2 Ultra Slim recess mounted EdgeLit LED module with high brightness LED package and unique pattern acrylic de-glaring diffuser sheet for glare free uniform light distrubution suitable for armstrong/grid ceiling.pannel light.

Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord (two) system complete all as specified and directed.

Supply and fixing LED Bollard integral decorative with PMMA diffuser 10 watt of height 0.6 meter with IP 65 protection suitable for single phase 230 volts 50 HZ AC Supply including LED bulb , Poles, service wire and cement work complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing wall mounted angular Electric chimney black colour of suction power not less than not less than 1200Cum/Hr,Al casette with stainless steel outer layer ,touch control panel,3 speed motor with 250 watt with decorative smart cooker hood SS and glass ,energy efficent Led light with digital display , including ducting not less than 12 feet as per site required complete all as specified and as directed by Engr-in-Charge.

Schedule of Credit

M/S ANIL KUMAR (BID ID -3073093)

SHREE RAM BUILD TECH (BID ID -3081085)

M/S MANINDER CONSTRUCTION CO. (BID ID -3083271)

GIAN ENGINEERS (BID ID -3083083)

a.k constructions (BID ID -3082182)