PROVISION OF TOILET AND BATHROOM BLOCK NEAR NO 2 INF BN OFFRS MESS AND IN BLDG NO T-35 AT LAKE COURT UDAIPUR MIL STN

Amount

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth & getting out in hard soil.

All as per item No 1 but excavation in disintegrated rock

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.

Returning, filling in incl spreading leveling, watering and well ramming in layer n.exc 25cm in layer in soft/loose soil.

Material & Labour for formwork to sides and soffits of beam, lintel rough finished surfaces etc.

Material & Labour for formwork to soffits of suspended slabs, such as roof slabs and similar work; not exc. 200 mm thick for flat rough finish surfaces.

Material & Labour for reinforced cement concrete Type B-1 (1:2:4) 20mm graded stone aggregate as in roof beam and slabs supported on columns and beams.

Ditto- but for chajjas/Lintel

Material & Labour mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia.

Material & Labour mild steel TMT bar 8 mm dia and over up to and including 10 mm dia in stirrups, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia.

Material & Labour for Brickwork with fly ash bricks, straight or curved on plan to any radius in one brick thick walls, built in cement mortar 1:6 complete all as specified and as directed.

Material & Labour for Brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

Material & Labour for Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

Material & Labour 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base /mass concrete complete all as specified and dirrected.

Supply and fixing for PCC coloured interlocking ( glossy finishing) paver blocks confirming to IS-15658-2006 of 60 mm thickness, M-35 grade as in hardstanding etc. laid over and including 50 mm thick screed or bedding layer of sand, complete all as specified.

Material & Labour for 75 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished surface using extra cement complete all as specified and directed

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material & Labour rendering 5 mm thick in CM 1:4 on concrete surface of ceiling & finished even & smooth without using extra cement.

Material and Labour for 15mm thick rendering on fair faces of brick work concrete surfaces (external walls) bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified. Note : (i) WPC shall be measured and paid separately.

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

Material & Labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing complete all as specified.

Material & Labour for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer's instrutions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete.

Material and Labour for Non-skid jointless Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM (1:4) all as specified and directed.

Material and Labour for Glazed ceramic coloured tiles in vertical surfaces 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified & directed.

Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 90mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.

Supply and fixing factory made solid PVC moulded door shutter with wood free EPS 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front page and 2 mm plane colour PVC sheet on back face supplying and fixing in frames at site as per speicfication and drawing.

Supply and fixing aluminium handle size & shape as per existing handle for aluminium door or 150 mm long etc. all as directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed

Supply and fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

Supply and fixing brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.

Supply and Fixing in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

Supply and Fixing in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor all as specified.

Supply and Fixing in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified.

Supply and Fixing vitreous china wash basin white flat back size 550 x 400mm oval shape excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified.

Supply and fixing 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule. (Make: Jaquar Essco/Prayag/Plumber/Jal)

Supply and Fixing in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

Supply and Fixing in repair 15mm in repair bore concealed stop valve type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

Supply & fixed in repair CP brass soap tray fixed with brass screw complete all as specified.

Supply & fixed in repair fancy type shower rose125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint complete all as specified.

Material & Labour for Green Marble 30cm x 30cm x 12-15 mm thick machine cut prepolished embedded for bathroom wall as corner shelf round shape all as specified and directed.

Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kg/Sqcm fixed complete to walls,ceilings or in floors including taking down of old GI tubing, 40 mm bore all as specified and directed.

Supply & fixing of GI tubing medium grade 15mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

Supply & fixing of GI tubing medium grade 20mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

Material & Labour CPVC tubing 15 mm dia medium grade galvanized with all fittings and fixed complete to brick/stone wall or laid in floor concealed.

Supply and fixing gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as specified and directed.

Material & Labour PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed .

Material & Labour PVC (SWR) floor trap 75/110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed .

Supply and Fixing 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, fixed to wall complete all specified and directed.

Supply and fixing PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

Supply and fixing PVC (SWR) bends any radius 75mm dia complete all as specified and directed .

Supply and fixing PVC (SWR) bends any radius 110mm dia complete all as specified and directed .

Supply and fixing PVC (SWR) vent cowl 110mm dia complete all as specified and directed .

Supply and Fixing rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position including taking down of existing tank all as specified and directed by Engr-in-charge.

Supply and fixing 20 mm PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified and directed. (Make-Prayag/Polytuff)

Supply & fixed Powder coated aluminium ventilator shutter with frame fixed/sliding type aluminium section weighing not less 0.55 Kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete.

Material & Labour for 4mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane complete

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified.

Supply & fixed for powder coated aluminium grill of 7.00mmx3mm thick section square, rectangular, triangular, circular shape aperture not exc 7 cm in length or width fixed with H or F channel complete all as specified and directed.

Providing lowering, laying, aligning & fixing in position and joining at all level/depths full round HDPE DWC Pipes (Double Wall corrugated) of 200mm dia bore with reqd jointing accessories of SN-8 grade as per IS-16098 (Part-2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawings and as per directions of Engr-in-Charge.

Material & Labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed on stone/brick masonry wall surface with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for One light point / Fan/ bell point controlled by one switch.

(a) One light point controlled by one switch with cables 1.5 sqmm size.

(b) One fan/ exhaust fan point controlled by one switch with cables 1.5 sqmm size.

Supply and Fixing switch piano flush type single pole one way 5/6 Amps.

Material & Labour ceiling rose surface type 3 terminals to be fixed on PVC block complete all as specfied and directed.

Material & Labour LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and Fixing LED security light luminaries of 25 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED's should have better optics and uniform distribution of light including GI tubing 25-40mm dia light grade within 1 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 2.5 sqmm stranded copper conductor of suitable length as per direction and approved by Engr-in-charge.

Supply and Fixing exhaust fan AC single phase steel body 240 Volts of size 200mm sweep with louver and complete accessories all as specified and directed by Engr-in-Charge.

Supply and Fixing Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x2.5sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 2.5 sqmm cable with colour code of R, Y & B for phase/ neutral and one run of same size cable with Green colour as earthing for socket point alongwith required PVC conduit and connected items will be measure as one RM.

chhaba construction (BID ID -3360319)