Renovation of APD quarters and other ancillary works at AAI residential colony of Mysuru Airport

Providing and fixing PVC pipes (4kg/cm2) confirming to IS complete with all fttings in sewer line, vent pipes, the rate inclusive of cutting, finishing etc with required slope complete as per the direction of EIC. a) 100 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Brickwork with common burnt clay F.P.S (non modular) bricks of deisgnation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). a) Second class teak wood

Providing and fixing flat pressed three layer particle or graded plain wood board medium density exterior grade (Grade 1)FPT-1, conforming and marked to frame, backing or studding with screws etc.complete (Frames, backing or studding with screws etc.complete (Frames, backing or studding to be paid seperately): 18mm thick

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Litre

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. a) 1.0 mm thick

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1,70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel scrdys etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc, After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/Glazing of plain/ toughened/laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. a) Three track three panels sliding windows with two glazed & one wire mesh panels with aluminium channel for roller track, wool pile, nylon rollers with SS 304 body - Using R2 series with frame (70mm & above) X (40mm & above & both glazed and fly screen sash (25mm & above) X (50mm & above ) with zinc alloy (zamak) powder coated touch locks with hook.( Height upto 1.20m)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. a) Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments et %c. complete. a) Size of Tile 600x600 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter.

12mm Cement Plaster of mix: - 1:6 (1 Cement : 6 Fine sand)

15 mm Cement Plaster on the rough side of single or half brick wall of mix: - 1:6 (1 Cement : 6 Fine sand)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.a) Two coats

Finishing walls with Acrylic Smooth exterior paint of required shade :a) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved band and manufacture

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete.250mm

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion , necessary brass screws etc. to suit shutter thickness complete.

Dismantling W.C pan of all sizes including disposal of dismantled materials including malba all complete as per directionss of Engineer-In-Charge.

Demolishing brick work manually/ by mechanical means including stacking of seviceable material and disposal of unserviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.- In cement mortar

Dismantling Door, Window and clerestory window (steel or wood )shutter Including chowkhats, archltrave , holdfasts etc.complete and stacking within 50 meters lead. Of are 3sq meter and below

Dismantling Steel work in single section including dismembering and stacking within 50 meter lead in : a) Channels, angles, tees and Flats

Dismantling tile work in floors and roofs laid in cement mortar including stackig material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Dismantling C.I. asbestos rain water pipe with fittings and clamps including stacking the material with in 50meters lead.A) 100 mm dia pipe.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved muncipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: a) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm , including painting of fittings and brackets , cutting and making good the walls wherever required: Kitchen sink with drain board :510X1040 mm bowl depth 250 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: Flexible pipe : 32 mm dia

Providing and fixing brass bib cock of approved quality : a) 20 mm nominal bore

Providing and fixing mirror of superior glass (of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453X357 mm.

Providing and fixing PTMT bottle Trap for wash basin and sink , of approved quality and colour. Waste coupling 31mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : a) 30 cm length - 15 mm nomi

nal bore

Providing and placing on terrace (at al floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): a) With float glass panes of 5 mm thickness.(weight not less than 12.50 kg/sqm)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing PVC pipes (4kg/cm2) confirming to IS complete with all fttings in sewer line, vent pipes, the rate inclusive of cutting, finishing etc with required slope complete as per the direction of EIC. a) 65 mm