Day to day Amritsar 2024-25

Amount

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

Pipes, cables etc, not exceeding 80 mm dia.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.

75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.

Single tee without door

75 mm bend

110 mm bend

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Cleaning of water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia. Pipes.

32 mm nominal outer dia. Pipes.

40 mm nominal outer dia. Pipes.

50 mm nominal outer dia. Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work

32 mm nominal outer dia. Pipes.

40 mm nominal outer dia. Pipes.

50 mm nominal outer dia. Pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Supplying the following items as and when required as per approved brand and approved manufacturer( ISI marked) complete as per direction of Engineer-In-Charge.

Flushing Cistern P.V.C. 10 litre capacity ( low level ) (In all colours as per direction of EIC)

White solid plastic seat cover with lid

Vitreous china flat back wash basin 550 x 400mm

Flexible (coil shaped) PVC waste pipe for sink and washbasin 32 mm dia with length upto 700mm i/c PVC waste fittings.

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Brass face/spindle for C.P. brass pillar cocks/ bib cocks/stop cocks etc.

CP stainless jali grating 100mm dia

Hydraulic door closer tubular type Aluminium section body

Aluminium hanging floor door stopper with twin rubber & stopper

Brass bib-cock -15 mm dia

Brass stop-cock- 15 mm dia

CP bass bib cock confirm to IS:8931 -15mm nominal bore

CP brass long body bib cock confirm to IS:8931 -15mm nominal bore

CP brass angle valve confirm to IS:8931 15mm nominal bore

Ball valve (brass) of approved quality, High or low pressure, with plastic floats- 15 mm nomonal bore

Uplasticised PVC connection pipe with brass unions, 45 cm length- 15mm nominal bore

CP spray jet for european wc pan,15mm nominal bore

CP brass pillar cock (Heavy type) confirm to IS:8931- 15mm nominal bore

G.I. pipes of Jindal/ Surya Prakash make for water supply

15mm dia nominal bore

PTMT bib cock - 15mm nominal bore

PTMT stop cock - 15mm nominal bore

PTMT pillar cock - 15mm nominal bore

PTMT grating circular type- 100mm nominal bore

PVC tank cover for all sizes of PVC tank

Aluminium Tower Bolts

Aluminium Handles

Aluminium Sliding Door bolts- 200 x 16mm

4mm thick plywood BWP( commercial )

100 mm mortice lock with 6 levers for aluminium door

Mild steel wire guage (galvanised) aperture 1.4 mm and 0.50 mm dia wire

PVC handle & ball cock for cistern with washer

Syphon set complete for PVC Cistern

Gun Metal Gate valve with CI Wheel of approved quality, [screwed end]- 25mm nomonal bore

GI Union of approved quality- 15mm nomonal bore

GI Union of approved quality- 20mm nomonal bore

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Mirindi wood available in Local Market

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Mirindi wood available in Local Market

35 mm thick shutters

30 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Particle Board 12 mm thick

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.

Repairs to existing steel doors/ windows/ cupboard shutters by cutting, welding etc. wherever required with or without dismantling all complete as per the directions of Engineer-in-Charge.(Cost includes the transportation of electric/gas welding plant to site).

Without dismantling

Including dismantling and refixing

Supply of Carpenter to do the assigned job complete as per direction of Engineer-In-Charge (Note: The material required for Job will be supplied by department)

Supply of Un skilled labour to do the assigned job complete as per direction of Engineer-In-Charge (Note: The material required for Job will be supplied by department)

Removal of Plants like Pipal Plant etc. from the roofs,shafts and from other parts of the Building at all heights and removing its roots,And pouring solution of Chlorpyriphos E.C 20% in the root of plants and making good the same complete as per direction of Engineer-in-Charge.

Terrace/floor cleaning including removal of rank vegetations,grass etc. and its disposal outside the compound to a municipal dump all complete as per direction of Engineer-in-Charge.

Grouting of terracing covered with tile bricks of clause designation 125 with cement mortar 1:3 (1 Cement : 3 Fine Sand) mixed with 2% of integral water profing compound by weight of cement and finished neat complete as per direction of E-in-Charge

Providing and fixing PVC pipe 100mm dia with necessary solvent complete as per direction of E-in-Charge

Repairing/re-setting of existing aluminum door/window shutters , tightening of cleats etc. replacing of pivots or aluminium hinges or rubber gasket/floor spring/door fittings wherever required including steel screws etc. all complete.

Dismantalling & Refixing existing Aluminium partition including panelling & doors with fittings & fixtures etc. all required for refixing complete as per direction of Engineer-in-Charge.(Note:-The Rate includes all Cleats & screws etc required for refixing the partition but new member/material if required shall be paid extra to the agency.

Repair to RCC members such as Column ,Beams, slabs and chajjas etc including cutting the damaged portion as per site conditions and restoring the exposed reinforcement in proper position and applying bonding agent of approved quality and manufacture. Then covering the damaged area with under coat of plaster of mix 1:1:2 ( 1 cement :1 coarse sand:2 coarse aggregate) finished rough and top finishing coat of 6mm cement plaster 1:3 ( 1cement : 3 fine sand )complete as per direction of Engineer in charge.( Note :- The item include necessary centering shuttering and scaffolding upto 10m height all complete.)

Cleaning of blocked sewer line from Manhole to Manhole including removing of all rubbish, garbage, sludge etc. complete in all respects in BSNL Staff Quarters, T.E. Buildings & Admn. Buildings as per the directions of Engineer-in-Charge. (Note:-T&P for the work shall be arranged by the agency). (Number of manholes to be counted for payment)

Providing the Plumbing services with skilled plumber for attending day to day complaints on urgent basis like repair of water supply equipments and sanittary installations in the BSNL Compounds within Ferozepur BA as per the direction of E-I-C.The agency shall provide all necessary tools and plants,ladder and scaffolding wherever required including Mobile Phone and instructions to the worker for attending the complaints.(Nothing extra shall be paid on this account.The materials/fittings required shall be paid for separately) (Carrying out all the above services /operations during the one month considering 15 days in one month job for payment)

Credit for old dismantled/unserviceable material: -

Old M.S section/GI/CI/SCI material

Unserviceable wooden door/window shutter with or without chowkhats fittings

Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose,brass gate valves, CP ring,CP brass towel rail etc. of all dia

PVC Bib cock,stop cock,ball cock/WC seat cover, internal fitting of low level PVC cistern , over head water tank etc.

Fuel wood

MOHIT SHARMA