Signage maintenance

SUMMARY OF PRICE BID

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Schedule A: Design, Supply and Installation of New Signage Boards

Interior Signages

Double-Sided Suspended/ Cantilever Illuminated Type Sign Boards: -Supplying and Installation of Double Sided Suspended/Cantilever Illuminated Sign, including all operations from fabrication to installation, all complete as per relevant design, drawings, Guidelines & technical specification and to the satisfaction of the Employer, made up of a Sign box 50 mm deep of an Extruded Aluminium modular profiled frame system with anodised finish of AO 1250/AO 6037. Sign box including channel supports are to be anodised coated to match the colour as per the approved design, drawings, Location, document and guideline. Front facia & pictograms (graphics) to be made up of 4mm thick 040 acrylic decorated with 3M block out vinyl and approved colour 3M cast vinyl design, electro cut and pasted on it, allowing the lighting only on the Content. Internally illuminated by using an LED module with a 140-degree viewing angle (minimum warranty period of 50000 Hours), inclusive of a suitable SMPS/LED Driver. Internal Signages shall be of IP52, and external Signages shall be of IP65 Certified. The Signage Should have an Easy mechanism for removing the content/Information for inspection and Services, Including Supporting Arrangements. Signs suspended from station ceilings should be fixed at a height of 2500 mm to the bottom of the sign from the finished floor level, as illustrated. The signs are suspended using hollow steel pipes or tubes, which shall house the power/data cable in a protective sleeve for illuminated signs/dynamic signs. Bushings are required to protect the power cable and for safety at every junction. The suspenders should offer height adjustment to take account of misaligned ceilings or beams to install the sign in a spirit level horizontal position. Signs in exposed areas subject to movement, such as swinging in high winds or when a train passes at speed, should be adequately designed to counter the imposed loads and deflections. Suspenders shall be made of MS powder-coated Round/ Square as per the approved design and drawings. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, electrical works & materials, SMPS, LED lighting, supply and fixing of Ceiling cap, fabrication, fixing, all accessories, labour, Transport, all leads, crane and boom lifts, etc., in complete

Single-Sided Suspended Illuminated Sign/Cantilever Single-Side Illuminated Boards

Supplying and Installation of Single Sided Suspended Illuminated Sign, including all operations from fabrication to installation, all complete as per relevant design, drawings, Guidelines & technical specification and to the Satisfaction of the Employer, made up of a box 50 mm deep of Extruded Aluminium modular profiled frame system with anodized finish of AO1250/AO 6037 complete. Sign box including channel supports are to be anodised coated to match the colour as per design, drawing/location, document and guideline. Front facia & pictograms (graphics) to be made up of 4mm thick 040 acrylic decorated with 3M block out vinyl and approved colour 3M cast vinyl design, electro cut and pasted on it, and necessary Electro cut, block out vinyl on the inner face of Acrylic for allowing the lighting only on the content. Internally illuminated by using an LED module with a 140-degree viewing angle (minimum warranty period of 50000 Hours), inclusive of a suitable SMPS/LED driver. Internal Signages shall be of IP52, and external Signages shall be of IP65 Certified. The Signage Should have an easy mechanism for removing the content/Information for inspection and Services. - Including Supporting Arrangements. Signs suspended from station ceilings should be fixed at a height of 2500 mm to the bottom of the sign from the finished floor level, as illustrated. The signs are suspended using hollow steel pipes or tubes, which shall house the power/data cable in a protective sleeve for illuminated signs/dynamic signs. Bushings are required to protect the power cable and for safety at every junction. The suspenders should offer height adjustment to take account of misaligned ceilings or beams to install the sign in a spirit level horizontal position. Signs in exposed areas subject to movement, such as swinging in high winds or when a train passes at speed, should be adequately designed to counter the imposed loads and deflections. The suspenders should offer height adjustment to take account of misaligned ceilings or beams to install the sign in a spirit level horizontal position. Signs in exposed areas subject to movement, such as swinging in high winds or when a train passes at speed, should be adequately designed to counter the imposed loads and deflections. Suspenders shall be made of MS powder coated Round/ Square as per the approved design and drawings. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, electrical works & materials, SMPS, LED lighting, supply and fixing of Ceiling cap, fabrication, fixing, all accessories, labour, Transport, all leads, crane and boom lifts, etc. complete

Wall/Face Mounted Illuminated Sign

Supplying and Installation of Wall/Face Mounted Single Sided Illuminated Sign, including all operations from fabrication to installation, all complete as per relevant design, drawings, Guidelines & technical specification, Signage schedule and to the satisfaction of the Employer. 50 mm deep sign box made from Extruded and Profiled Aluminium modular system with anodised finish of AO01250/AO 6037 complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing/existing frame colour, document and guideline. Front facia & pictograms (graphics) to be made up of 4mm thick 040 acrylic decorated with 3M block out vinyl and approved colour 3M cast vinyl design, electro cut and pasted on it, allowing the lighting only on the Content. Internally illuminated by using an LED module with a 140-degree viewing angle (minimum warranty period of 50000 Hours), inclusive of a suitable SMPS/LED driver. Internal Signages shall be of IP52, and external Signages shall be of IP65 Certified. The Signage Should have an Easy mechanism for removing the content/Information for inspection and Services. - Including Supporting Arrangements. Signs should be fixed at a suitable approved height to the bottom of the sign from the finished floor level, as per the approved design and drawings. Bushings are required to protect the power cable and for safety at every junction. The rate is inclusive of Supply, Installation of signage, inclusive of all Materials, electrical works & materials, SMPS, LED lighting, fabrication, fixing, labour, Transport, Cleaning of Surface, all leads and lifts, etc., complete

Emergency Exit Modular LED Illuminated Wall /Face Mounted Sign

Supply and Installation of LED Illuminated Wall Mounted Emergency Exit Signages (Modular Type) with min 2-hour Battery Backup, as per the approved design and drawings, Guidelines and to the Satisfaction of the Employer, made in Plotter cut green vinyl pasted on the rigid translucent sign face. Internal illumination using an energy-efficient lighting system, either with its own battery backup for a minimum of 2 hours or connected to an uninterrupted power supply. All emergency signage control gear shall comprise an emergency lighting control unit complete with rectifier, charger and nickel-cadmium batteries. The control unit shall be capable of operating the lamp during an emergency condition for a duration of at least 2 hours, with the socket and plugs. Size 300x150mm. The rate is inclusive of Supply, Installation of signage including all Materials, electrical works, LED lighting with Drive, fabrication, fixing, all accessories, labour, Transport, all leads and lifts, etc., complete. These safety signs will be fixed inside the Station area, Ancillary Building, Public and Non-Public area, Tunnel, and other areas as required by the Employer

Non-Illuminated Signages - Interior

Wall/Face Mounted Non-Illuminated Sign:Supply and fixing Wall/Face Mounted Non-Illuminated Signs, including all operations from fabrication to installation, all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of the Employer. 50mm deep Sign box made from extruded Profiled Aluminium modular system with anodised finish of AO 01250/AO 6037 complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing and guideline. Front facia, pictograms and their graphics are to be made up of 4mm thick 040 Acrylic sheet decorated with 3M plotter cut vinyl and approved colour 3M cast vinyl design electro cut and pasted on. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of Surface, all leads, crane and boom lifts, etc., complete.

Wall/Face Mounted Non-Illuminated Sign:Supply and Fixing of Wall/Face Mounted Non-Illuminated signs, including all operations from fabrication to installation, all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of the Employer. Printed self-adhesive vinyl pasted on the ACP sheet, placed inside panels made up of secured lockable snap-fit aluminium frame 30mm finished in colour as specified, as per the approved design, Drawing and location. The poster panels shall be digitally printed and placed inside the frame behind a clear Polycarbonate sheet. Mainly for Multimodal, landmarks, Information, Ticketing, Maps, warning and first Aid signs. Supplying and fixing a sign box 25 mm deep of Aluminium cosine snap fit frame modular system with anodised finish of AO01250/AO 6037 complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing/existing frame colour, document and guideline. Front facia & pictograms (graphics) to be made up of self-adhesive printed vinyl pasted over the ACP sheet and fitted into the snap fit frame, which are bolted and screwed into the wall. The sign face is to be covered with a clear polycarbonate sheet. The Signage Should have an Easy mechanism for removing the content/Information for inspection and Services. - Including Supporting Arrangements. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, crane and boom lifts, etc., complete

Photo Luminescent Signage

Supplying and fixing of Wall/Face Mounted Photo Luminescent Signs, including all operations from fabrication to installation, all complete as per the approved design, drawings and location, technical specification, signage schedule and to the satisfaction of the Employer, as per the approved design, Drawings and location. All Photoluminescent signs shall be procured from a specialised agency providing signs with the following specifications, but not limited to: Waterproof, Non-corrosive, withstand temperatures from 300 °C up to 650 °C, Non-reactive to Dilute Alkalis and Acids, Glow time in excess of 2 mcd/m2 after 60 minutes. UV-stable and weather-resistant for outdoor applications, the Ability to absorb energy from almost any light source (sunlight, fluorescent, incandescent) and then to emit light when ambient darkness occurs. The light produced is yellow-green in colour and is highly visible, lasting up to 10 hours. - Wall-mounted type signage. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, crane and boom lifts, etc., complete. These safety signs will be fixed inside the Station, Ancillary Building, Public and Non-Public area, Tunnel, and other areas as required by the Employer

Floor Signs Stickers

Supply and fixing Floor Sign Self-adhesive heavy duty pavement graphic material (heavy duty floor vinyl or equivalent) must be used for these markings where the designs/colours are encapsulated beneath a hardwearing translucent top layer, including all operations from fabrication to installation all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of CMRL. The material shall be anti-slip, fade-resistant and scratch-resistant. The markings must be inspected for adhesion and wear on a regular basis, as per the approved design, Drawing and location. as per the approved design, Drawing and location. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, crane and boom lifts, etc., in complete

Printed Vinyl Flex

Supply and Installation of GI Frame supports with Printed Flex Signage of non-backlit flex and backlit flex of approved brand with high-quality Digital print on it. Both for interior and Exterior placement to be considered, as per the approved design, Drawing and location. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads and lifts, etc, complete including all operations from fabrication to installation, all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of CMRL

Exterior Signages - Non-Illuminated

Non-Illuminated Signage Double-Sided: Supply and Installation of Post Mounted Single-Sided Non-Illuminated signs, including all operations from fabrication to installation, all complete as per relevant drawings, technical specification, Signage schedule and to the satisfaction of CMRL, as per the approved design, Drawing and location. 50 mm deep sign box made from Aluminium modular system with anodised finish of AO01250/AO 6037 complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing/existing frame colour, document and guideline. Front facia & pictograms (graphics) to be made up of 4mm thick 040 acrylic decorated with 3M block out vinyl and approved colour 3M cast vinyl design, electro cut and pasted on it, back covering sheet should be 4mm thick ACP. Internal signs and necessary Electro cut, Electro cut vinyl. The Signage Should have an Easy mechanism for removing the content/Information for inspection and Services. - Inclusive of providing and fixing sign posts in 80mm Dia MS hollow sections along with 6mm thick mounting plates welded to the Mounting frame, providing anchor bars welded to the bottom for embedding in the Floor/Concrete. The rate is inclusive of Supply, Installation of signages inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, crane and boom lifts etc complete, including all operations from fabrication to installation all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of CMRL

Post Mounted (Flag Type) Double-Side Non- Non-Illuminated Sign

Supply and fixing post-mounted double-sided non-illuminated signs, including all operations from fabrication to installation, all complete as per relevant drawings, technical specification, signage schedule and to the satisfaction of CMRL, as per the approved design, Drawing and location. 50mm deep Sign box made from Extruded Aluminium modular system with anodised finish of AO 01250/AO 6037 or equivalent of 250mm mill finish complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing and guideline. Front facia, and its graphics are to be made up of 3mm thick ACP decorated with approved colour 3M cast Printed Self-adhesive Exterior vinyl with Lamination. The Signage shall have an easy mechanism for removing the content/ Information for inspection and access to the services. The Cost is inclusive of all Vertical MS, with Primer and Enamel 2 coats, with necessary foundation as per the approved drawings. Inclusive of providing and fixing sign posts in 80mm Dia MS hollow sections along with 6mm thick mounting plates welded to the Mounting frame, provided with anchor bars welded to the bottom for embedding in the Floor/Concrete. The rate is inclusive of Supply, Installation of signages inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, crane and boom lifts etc complete, including all operations from fabrication to installation all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of CMRL

Retro Reflective Signage

Supply And Installation of Post-Mounted Double-Side Retro-Reflective:Providing and Installation of post-mounted double-sided retroreflective signs, including all operations from fabrication to installation, all complete as per relevant drawings, technical specification, signage schedule and to the satisfaction of CMRL. 50mm deep Sign box made from Extruded Aluminium modular system with anodised finish of AO 01250/AO 6037 or equivalent of 250mm mill finish complete. Sign box including channel supports are to be anodised coated to match the colour as per approved design, drawing, location and guideline. Front facia, pictograms and their graphics are to be made up of 3mm thick ACP decorated with approved colour 3M cast Retro Reflective vinyl, designed, electro cut and pasted on it. The back covering sheet should be 3mm thick ACP. Internal signs shall be IP52, and external signs shall be IP65 certified as per approved graphics and fabrication drawing. The Signage shall have an easy mechanism for removing the content/ Information for inspection and access to the services. Inclusive of providing and fixing sign posts in 80mm dia MS hollow sections along with 6mm thick mounting plates welded to the Mounting frame, provided with anchor bars welded to the bottom for embedding in the Floor/Concrete. The rate is inclusive of Supply, Installation of signages inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, crane and boom lifts etc complete, including all operations from fabrication to installation all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of CMRL

Supply and Installation of retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural framework from the gantry, fixing and erecting the same in position, all complete as per drawings, specifications and direction of the engineer-in-charge. (Structural framework work, including M.S. plate, to be provided separately. The rectangular area of the sheet only shall be measured for payment. The rate is inclusive of Supply, Installation of signages inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, crane and boom lifts etc complete, including all operations from fabrication to installation all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of CMRL

Mandatory/ Regulatory sign boards of 900 mm diameter with a support length of 3750 mm -Any shape equivalent to this area

Supply and Installation of retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural framework from the gantry, fixing and erecting the same in position, all complete as per drawings, specifications and direction of the engineer-in-charge. (Structural framework work, including M.S. plate, to be provided separately. The rectangular area of the sheet only shall be measured for payment. The rate is inclusive of Supply, Installation of signages inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, cranes and boom lifts etc complete, including all operations from fabrication to installation all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of CMRL

Overhead informative road signage

Supplying and fixing of Retro Reflective sign, made up of a 40 mm deep sign box made from Aluminium modular system with anodised finish of AO01250/AO 6037, complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing/existing frame colour, document and guideline. Front facia & pictograms (graphics) to be made up of 4mm thick 040 acrylic decorated with 3M block out vinyl and approved colour 3M cast vinyl design, electro cut and pasted on it, back covering sheet should be 4mm thick ACP. Internal signs and necessary Electro cut, Electro cut vinyl. The Signage Should have an Easy mechanism for removing the content/Information for inspection and Services. - Inclusive of providing and fixing sign posts in 80mm Dia MS hollow sections along with 6mm thick mounting plates welded to the Mounting frame, providing anchor bars welded to the bottom for embedding in the Floor/Concrete. The rate is inclusive of Supply, Installation of signages inclusive of all Materials, fabrication, fixing, all accessories, labour, Transport, Cleaning of surface, all leads, crane and boom lifts etc complete, including all operations from fabrication to installation all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of CMRL

Retro Reflective Double-sided on ACP Sheet with Specification as in 29

Retro Reflective Single-sided on ACP Aluminium Sheet with Specification as in 29

LED Variables Display

Supply and Installation of LED- Variable Dynamic display board, including all stations and platform numbers as dynamics in all stations, and LED display board for Southern Railway Train information in required stations. A variable message portion typically 16x96 dot matrix LED signage comprising a 16/8-bit microprocessor system having necessary Non-volatile Memory, RAM, decoders, etc. for an LED display Signage board with LED of reputed make. Amber colour 5 mm oval LED (with 8 mm pitch) shall be used for the variable portion, and 5 mm cool white LED shall be used in the backlit fixed portion of the signage. LEDs of uniform intensity are used for longer visibility for display boards in an open area where the minimum visibility requirement is 50 meters. Character size 55 mm/60mm (Variable and as per the requirement), including all fixing and fabrication materials (All post-mounted, suspended and wall-mounted)- The LED DYNAMIC display board will be robust, suitable for interior and extreme Exterior weather of hot summer and Rainy seasons. The scroll should be flexible to change the direction of upwards, downwards and horizontal to the satisfaction of the Employer, including colour. Necessary software and font types to be submitted to CMRL- Multi Colour

Supply and Installation of LED- Variable Dynamic display board, including all stations and platform numbers as dynamics in all stations, and LED display board for Southern Railway Train information in required stations. A variable message portion typically 16x96 dot matrix LED signage comprising a 16/8-bit microprocessor system having necessary Non-volatile Memory, RAM, decoders, etc. for an LED display Signage board with LED of reputed make. Amber colour 5 mm oval LED (with 8 mm pitch) shall be used for the variable portion, and 5 mm cool white LED shall be used in the backlit fixed portion of signage. LEDs of uniform intensity are used for longer visibility for display boards in an open area where the minimum visibility requirement is 50 meters. Character size 55 mm/60mm (Variable and as per the requirement), including all fixing and fabrication materials (All post-mounted, suspended and wall-mounted)- The LED DYNAMIC display board will be robust, suitable for interior and extreme Exterior weather of hot summer and Rainy seasons. The scroll should be flexible to change the direction of upwards, downwards and horizontal to the satisfaction of the Employer, including colour. Necessary software and font types to be submitted to CMRL- Single Colour

Exterior Illuminated Type Signages

Illuminated Glow Sign: Supply and Installation of Illuminated Glow Sign, made of 50mm thick Extruded & Profiled Aluminium Box Frame (anodised finish of AO 01250/AO 6037) supported internally with powder coated MS flat angle channels as per approval, and LED Tube Lights for the illumination of signage with SMPS/LED Driver, and printed vinyl flex pasted with the Aluminium frame. Sign box including channel supports are to be anodised coated to match the colour as per drawing and guideline, with 4mm thick Translucent Acrylic-Illuminated Type Single Sided Floor Post Mounted, Design, Supply and installation of Signage with all supports, labour and finishes. Arrangements. Signs should be fixed at a suitable approved height to the bottom of the sign from the finished floor level, as per the approved design and drawings. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, electrical works & materials, SMPS, LED lighting, fabrication, fixing, labour, Transport, all leads, crane and boom lifts, etc complete

Illuminated 3d Glow Sign: Supply and Installation of 3D GLO Sign including all operation from fabrication to installation all complete as per relevant design, drawings, Guidelines & technical specification, Signage schedule and to the satisfactions of the Employer, made of Profile cut 3-dimensional letters with Pictogram out of thick aluminium sheets/Acrylic finished with Powder coating / PU painting for exterior durability, to match the specified colours for an exterior application. Sign execution placement and fixing details should be well coordinated with the architectural treatment at the location. The sign shall be illuminated with backlit. Fixed in the Facade of the Station Buildings, FOBs, and other Station Structures based on Necessity. LED specifications as specified above. Illuminated by using an LED module with a 140-degree viewing angle (minimum warranty period of 50000 Hours), inclusive of a suitable SMPS/LED Driver. Internal Signages shall be of IP52, and external Signages shall be of IP65 Certified. The Signage Should have an Easy mechanism for removing the content/Information for inspection and Services. - Including Supporting Arrangements. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, electrical works & materials, SMPS, LED lighting, fabrication, fixing, labour, Transport, all leads, crane and boom lifts, etc complete

Floor Mounted Double-Sided Illuminated Totem Sign

Supply and Installation of floor-mounted double-sided illuminated Totem signs, including all operations from fabrication to installation, all complete as per relevant drawings, technical specification, signage schedule and to the satisfaction of the Employer. Supplying and fixing a sign box 50 mm Extruded, Profiled Aluminium modular system suitable for the Totem with anodised finish of AO01250/AO 6037 complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing/existing frame colour, document and guideline. Front facia & pictograms (graphics) to be made up of 4mm thick 040 acrylic decorated with 3M block out vinyl and approved colour 3M cast vinyl design electro cut and pasted on it, and necessary Electro cut, block out vinyl on the inner face of Acrylic for allowing the lighting only on the Content. Internally illuminated by using an LED module with a 140-degree viewing angle (minimum warranty period of 50000 Hours). Internal Signages shall be of IP52, and external Signages shall be of IP65 Certified. The Signage Should have an Easy mechanism for removing the content/Information for inspection and Services. - Including Supporting Arrangements. This exterior signage should be robust, should be designed to withstand the extreme hot and rainy exterior conditions, and should withstand all imposing loads, including the cyclonic conditions of Chennai. The Floor Mounted Totem shall have an internal structure and a concrete foundation designed to withstand the imposed loads. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, electrical works & materials, SMPS, LED lighting, fabrication, fixing, labour, Transport, all leads, crane and boom lifts, etc complete

Post Mounted Double Sided Illuminated Sign

Supply and fixing Cantilever double-sided illuminated signs, including all operations from fabrication to installation, all complete as per relevant drawings, technical specification, signage schedule and to the satisfaction of CMRL.50mm deep Sign box made from Extruded and profiled Aluminium modular system with anodised finish of AO 01250/AO 6037 complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing and guideline. Front facia, pictograms and their graphics are to be made up of a 4mm thick 040 Acrylic sheet decorated with 3M block out vinyl and approved colour 3M cast vinyl design, electro cut and pasted on it. Internally illuminated by using an LED module of GE tetra mini max or equivalent (a minimum 50000 hours usage period warranty is a must for lighting) with a 140-degree viewing angle. Internal signs shall be IP52 and external signs shall be IP65 certified, with SMPS/LED Driver as per approved graphics and fabrication drawing. The Signage shall have an easy mechanism for removing the content/Information for inspection and access to the services. Flag Type Signage with Pole/Post support (Double Side): Providing and fixing post-mounted double-sided illuminated signs, including all operations from fabrication to installation, all complete as per relevant drawings, technical specification, signage schedule and to the satisfaction of CMRL. Inclusive of providing and fixing sign posts in 80mm Dia MS hollow sections along with 6mm thick mounting plates welded to the Mounting frame, provided with anchor bars welded to the bottom for embedding in the Floor/Concrete

Wall/Face Mounted Illuminated Sign

Providing and fixing Wall/Face Mounted Illuminated signs, including all operations from fabrication to installation, all complete as per relevant drawings, technical specification, Signage schedule and to the satisfaction of Employer, made up of a 50 mm deep sign box made from an Aluminium modular system with anodised finish of AO01250/AO 6037 complete. Sign box including channel supports are to be anodised coated to match the colour as per drawing/existing frame colour, document and guideline. Front facia & pictograms (graphics) to be made up of 4mm thick 040 acrylic decorated with 3M block out vinyl and approved colour 3M cast vinyl design, electro cut and pasted on it, and necessary Electro cut, block out vinyl on the inner face of Acrylic for allowing the lighting only on the content. Internally illuminated by using an LED module with a 140-degree viewing angle (minimum warranty period of 50000 Hours). Internal Signages shall be of IP52, and external Signages shall be of IP65 Certified. The Signage Should have an Easy mechanism for removing the content/Information for inspection and Services. - Bushings are required to protect the power cable and for safety at every junction. The Sign shall comprise the CMRL logo of the required size and channel letters in required fonts of Tamil and English in the specified font height, depicting the station name fixed on either side of the logo supported on a rigid supporting system in steel. The logo and the channel letters shall be fabricated to the required shape and size & to be made out of mild steel plate(s) of required thickness(es), drilling necessary holes of required dia. at appropriate places in the back plate for fixing purposes and in the peripheral plate for drainage purposes. Providing a necessary supporting system comprising mild steel angle members of the required size and lengths, including an LED module as per drawings. Polyurethane painting of the MS angles, MS tubes, and the required colour, mounting at the required locations on the station building. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, electrical works & materials, SMPS, LED lighting, fabrication, fixing, labour, Transport, all leads and lifts, etc., complete

Larger Station Name Signages

Supply and Installation of single-sided illuminated signs, including all operations from fabrication to installation, all complete as per relevant drawings, technical specification, signage schedule and to the satisfaction of the Employer.3 to 4 inch Sign box made from 3mm ACP. Sign box including channel supports. Front facia, pictograms and their graphics are to be made up of a 3mm thick Translucent Acrylic sheet decorated with a router-cut back side of 3mm acrylic pasted on it. Internally illuminated by using an LED module of an approved brand with a minimum 50000 hours usage period warranty is a must for lighting, with a 140-degree viewing angle. Back covering sheet should be 3mm thick ACP, shall be IP 65 certified as per approved graphics and fabrication drawing. The signage shall have an easy mechanism for removing the content/information for inspection and access to the service. The overall sign face will be with ACP, required content will be router cut on the ACP surface, and necessary Vinyl and Translucent acrylic will be fixed on the inner side of the sign box to the ACP inner surface, with necessary SMPS/LED Driver, etc., all complete, Wall Mounted type. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, electrical works & materials, SMPS, LED lighting, fabrication, fixing, labour, Transport, cleaning of surface, all leads, crane and boom lifts, etc., complete

Structural Arrangements

Steel work in built-up tubular (round, square or rectangular hollow tubes, etc.) trusses, etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special Shaped washers, etc. Complete for Hot finished welded type tubes for gantry arrangement as per the engineer's instructions

Suspenders Fabrication If Any Required Additionally

Supply, Fabrication and fixing of Steel work in built up tubular 3mm thick (round, square or rectangular hollow tubes etc) for signage's suspender including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted, Hot finishes seamless type tubes complete (Note:=- All MS Components to be powder coated after completion of all fabrication including drilling of hole etc), as per relevant approved design, drawings, Guidelines & technical specification, Signage schedule and to the satisfaction of the Employer

Supply, Fabrication and Fixing of Stainless steel (Grade-304) hollow section round/square tubes, with Stainless steel bolts/square bar with the works including fabrication, assembling, erection, welding, curvature, grinding, buffing, etc, as per relevant approved design, drawings, Guidelines & technical specification, Signage schedule and to the satisfaction of the Employer

Fabrication For Flag Type Support

Supply, Fabrication and fixing, Powder coated MS Tubular Section-Support of Size 100 x 100 mm with fabrication, as per relevant approved design, drawings, Guidelines & technical specification, Signage schedule and to the satisfaction of the Employer

Supply, Fabrication and Fixing of Stainless steel (Grade-304) hollow section round/square tubes, with Stainless steel bolts/square bar with the works including fabrication, assembling, erection, welding, curvature, grinding, buffing, etc., as per relevant approved design, drawings, Guidelines & technical specification, Signage schedule and to the satisfaction of the Employer

Foundation Works

Foundation works including Sand filling 50mm, Concrete 1:1.5:3 ratio with necessary Foundation Pit Excavation, 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete, as per relevant approved design, drawings, Guidelines & technical specification, and to the satisfaction of the Employer

Tactile And Braille Signages

Supply and Fixing of Anti-Slip Tape on staircases as per relevant design, drawings, Guidelines & technical specification and to the satisfaction of the Employer, made up of 3M A Thick PVC Base Layer Infused with Quartz Sand and Coated with Water-Based Acrylic & Acrylic Solvent Adhesive. Material: PVC and Size: 50mm wide x Step Size. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fixing, all accessories, labour, Transport, Cleaning of surface, all leads and lifts, etc, complete, including all operations from fabrication to installation, all complete as per the approved design, Drawing and location, technical specification, signage schedule and to the satisfaction of the Employer

Supply and Fixing of Handrail Braille Sign made up of Acrylic and PVC as basic material with the necessary additional materials. Existing Hand Rails as per relevant Specifications, design, drawings, Guidelines & technical specification and to the satisfaction of the Employer. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fixing, all accessories, labour, Transport, Cleaning of surface, all leads and lifts, etc, complete, including all operations from fabrication to installation, all complete

Supply and Fixing of Handrail Braille Sign made up of SS as basic material with the necessary additional materials. Existing Hand Rails as per relevant Specifications, design, drawings, Guidelines & technical specification and to the satisfaction of the Employer. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fixing, all accessories, labour, Transport, Cleaning of surface, all leads and lifts, etc, complete, including all operations from fabrication to installation, all complete

Supply and Fixing of Entrance Braille Signage and Room Braille signage made up of SS and Acrylic as basic material with the necessary additional materials as per relevant Specifications, design, drawings, Guidelines & technical specification and to the satisfaction of the Employer. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fixing, all accessories, labour, Transport, Cleaning of surface, all leads and lifts, etc., complete, including all operations from fabrication to installation, all complete

Supply and Fixing of Emergency Evacuation plan Signage made up of Acrylic Glow in Dark with necessary required additional materials as per relevant Specifications, design, drawings, Guidelines & technical specification and to the satisfaction of the Employer. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fixing, all accessories, labour, Transport, Cleaning of surface, all leads and lifts, etc., complete, including all operations from fabrication to installation, all complete

Supply and Fixing of Information Signage -Floor Map made up of Acrylic with necessary materials as per relevant Specifications, design, drawings, Guidelines & technical specification and to the satisfaction of the Employer. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fixing, all accessories, labour, Transport, Cleaning of surface, all leads and lifts, etc., complete, including all operations from fabrication to installation, all complete

Supply and Fixing of Room and Floor Directory Signage made up of Acrylic with necessary materials as per relevant Specifications, design, drawings, Guidelines & technical specification and to the satisfaction of the Employer. The rate is inclusive of Supply, Installation of signage inclusive of all Materials, fixing, all accessories, labour, Transport, Cleaning of surface, all leads and lifts, etc., complete, including all operations from fabrication to installation, all complete

Heavy Duty Anti-Slip Tape: Supply and installation of 3M Stamark TM N450 Black Colour / yellow colour / white colour of size 2inch x 210 feet with pre-coated self-adhesive having abrasion-resistant high reflective index micro crystalline ceramic beads bonded to a highly durable top coat, and must have a normal thickness of 2.3mm at pattern heights. It should also meet the requirements as specified in ASTM D4505. The surface of the tape must have an initial skid resistance value of 45 BPN when tested according to the procedure of ASTM E303. The cost includes 3M primer and all the cleaning and application charges

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Schedule B: Modification of Existing boards & maintenance of Existing Signage Boards with Design

Supply and fixing of 3M block out vinyl of approved colour 3M cast vinyl design, electro cut and pasted on existing acrylic decor. The Work includes the removal of Existing Vinyl and cleaning the surface before pasting new Vinyl -Vertical line Map

4mm Thick Acrylic with block-out Vinyl. Replacing the Existing by Supply and fixing of Front facia & pictograms (graphics) to be made up of 4mm thick 040 acrylic decorated with 3M block out vinyl of approved colour 3M cast vinyl design, electro cut and pasted on 4mm thick Acrylic. The work includes the cost of removing damaged existing Acrylic and Pictogram and replacing them with new ones. For Payment, the size of the Board will be measured

Supply and fixing of 3M HP Printed vinyl with Matt Lamination over existing ACP/Acrylic/wall/tile of approved colour and Design by CMRL. The Work includes the removal of Existing Vinyl and cleaning the surface before pasting new Vinyl- Heavy-duty vinyl for permanent use

Supply and fixing of printed vinyl with Matt Lamination over existing ACP/Acrylic/wall/tile of approved colour and Design by CMRL. The Work includes the removal of Existing Vinyl and cleaning the surface before pasting new Vinyl- for Temporary use

HP Printed Vinyl with ACP/Acrylic. Replacing the Existing Content by supplying and fixing of Front facia (graphics) to be made up of 4mm thick ACP/Acrylic decorated with approved Colour 3M cast Printed Vinyl with approved design and pasted on ACP/Acrylic

Eco-solvent Printed Vinyl on Existing ACP/Acrylic.Replacing the Existing Content by supplying and fixing of Front facia (graphics) by approved Colour 3M cast Printed Eco Solvent Vinyl with design and pasted on the existing 4mm thick ACP/Acrylic

LED Illumination (Loose LED 2 Watts) Exterior Signages Replacement of existing non-working LEDs from the existing illuminated signage, including all suspended, wall-mounted signages and replacing them with new LED Strips, with the fixing of internal illumination using LED modules of an approved brand with a 140-degree viewing angle (minimum warranty period of 50000 Hours). Internal Signages should be IP52 and external Signages should be IP65 certified. Fixing of LED Modules includes all accessories, SMPS for LED illumination. The necessary arrangements have to be made by the contractor for removing and refixing in the location. (Illuminated area /sqm is the same for single-sided and double-sided signage)

LED Illumination (Loose LED 2 Watts) Interior SignagesReplacement of existing non-working LEDs from the existing illuminated signages, including all suspended, wall-mounted signages and replacing them with new LED Strips, with the fixing of internal illumination using LED modules of an approved brand with a 140-degree viewing angle (minimum warranty period of 50000 Hours). Internal Signages should be IP52 and external Signages should be IP65 certified. Fixing of LED Modules includes all accessories, MPS for LED illumination. Min 50 Minimum of necessary arrangements has to be done by the contractor for removing and refixing in the location. Illumination level of the back-lit, up to the satisfaction of the Employer (Illuminated area /sqm is the same for single-sided and double-sided signage).

SMPS Replacing the faulty SMPS by Supply and fixing of approved brand IP65 rated SMPS in Existing Sign Boards. The Work includes the cost of Removing, replacing the SMPS and refixing of Signage Board of any Size and any height.

Electro Cut Acrylic letters Replacement of fallen/ damaged 8mm thick acrylic electro cut letters on the existing Sign board by replacing them with new ones of the required Size at any height. For payment maximum height and width of the individual letter will be measured

Clip-on Frame.Replacement of the damaged Clip-on Frame System by supplying and fixing an approved colour Clip-on frame with necessary fixing arrangements.

Updating of Station destination as Wimco Nagar with train timings in the existing LED display in the totem signages

Conversion of Non-Illuminated Signage by providing Suitable approved Retroreflective Signage. The scope of work includes the Supply and fixing of approved colour 3M Retro Reflective vinyl, removal and cleaning works of existing vinyls as identified and approved by CMRL

3M Frosted Sticker Supply and fixing of 3M Foster sticker with design electro cut and pasted on the Glass doors. The work may include the removal of existing stickers

Plain Acrylic Sheet. Supply and Fixing of Clear, glossy finished 2mm Acrylic Sheet on information board signage with decorative mirror screws

3M Sun film Supply and fixing of 3M glass sun film on the glass of the approved brand and colour. The work may include the removal of existing stickers.

Relocation of existing Suspended-Both Illuminated and Non-Illuminated, Wall Mounted-Both Illuminated and Non-Illuminated; and fixing in a Suitable area of the Station, inclusive of all material excluding Signage

Strengthening of the existing signage structure and fixing, to avoid damage in terms of additional welding and hardware

Removal of damaged existing hardware and replacing, refixing with Firm fixing by new hardware/frames, etc., for wall-mounted signage.

Applying Anticorrosive paint for the MS supports, MS Hardware, Frames and other MS requirements

Maintenance of Anti-Slip Tape: Removal and Replacement of existing damaged 3M Stamark TM N450 Black Colour / yellow colour / White Colour of size 2inch x 210 feet with pre-coated self-adhesive having abrasion-resistant, high reflective index micro crystalline ceramic beads bonded to a highly durable top coat, and must have a normal thickness of 2.3mm at pattern heights. It should also meet the requirements as specified in ASTM D4505. The surface of the tape must have an initial skid resistance value of 45 BPN when tested according to the procedure of ASTM E303. The cost includes 3M primer and all the cleaning and application charges.

Please Enable Macros to View BoQ information