Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 CrAccepted-AOC | ₹21.0 Cr Quoted ₹21.5 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹21.9 CrRejected-Finance | ₹21.9 Cr | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹21.9 CrRejected-Finance K 99 LGF KALKAJI NEW DELHI 110 019 | NEW DELHI | SOUTH EAST DELHI | DELHI | 110019 | ₹21.9 Cr | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹22.4 CrRejected-Finance | ₹22.4 Cr | L4 | Rejected-Finance Other than L1 |
| 5 | Rejected-Technical | - | - | Rejected-Technical Does not qualify for opening of Cover-2 being three classes below the eligible class as per NIT. |
Tender Value
₹18 Cr
EMD Value
₹12.3 L
Closing Date
17 Nov 2022, 6:00 pmClosed
Chief Engineer Pune Zone
Chief Engineer Pune Zone Dakshin Kaman Marg CAMP, Pune PIN- 411001
COMPLETION OF INCOMPLETE WORK FOR PROVISION OF OTM ACCN FOR 3RD MEDIUM REGT (PH-I OF TWO PHASES) AT AURANGABAD
2022_MES_529368_2
CA NO CEPZ/DEO/TOKEN-04 OF 2022-23
Open Tender
Civil Works
500 days
Aurangabad
Class SS
Category a(i)
Also Refer NIT
8 documents required · 8 mandatory
₹3,000
GE (South) Ahmednagar
₹12.3 L
Yes
16 Dec 2022
21 Oct 2022
19 Nov 2022
21 Oct 2022
17 Nov 2022
3 Nov 2022
22 Oct 2022 - 29 Oct 2022
Amount
NOTE: Schedule ‘A’ Part I to XII are Prepriced by MES. Bidders shall insert their lumpsum amount in the blue coloured field under Col-13 only.
Total amount of Sch 'A' Part-I (Building Works)
Total amount of Sch 'A' Part-II (Internal Water Supply)
Total amount of Sch ‘A’ Part III (Internal Electrification)
Total amount of Sch ‘A’ Part IV (External Water Supply)
Total amount of Sch ‘A’ Part V (External Electric Supply)
Total amount of Sch ‘A’ Part-VI (ROAD, PATH/CULVERTS)
Total amount of Sch ‘A’ Part VII (Sewage Disposal)
Total amount of Sch 'A' Part-VIII (Area drainage)
Total amount of Sch 'A' Part-IX-( FENCING AND GATE)
Total amount of Sch 'A' Part-X (LIGHTENING PROTECTION)
Total amount of Sch 'A' Part-XI- (DISMANTLING/DEMOLITION)
Total amount of Sch ‘A’ Part XII ( SITE CLEARANCE/ EXCAVATION AND EARTHWORK)
SCH 'A PART XIII (Miscllaneous B/R and E/M works) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only
Internal Electrification
S & F Flame proof exhaust fan 300 mm sweep heavy duty 240 volts,1400 RPM including fixing of mounting frame in the round hole in the wall,by means of rugged bolts,nut and washer etc, including 3 core copper conductor flexible cord wirth FRLS sleeve for 1.5 sq mm cross sectional area of required length from porcelain connector block of the Exhaust fan complete all as specified and directed by Engineer - in - charge
Supply & Fix ceiling fan 5 star BEE mark (after assembling the same) with the fan hook/box, 1200 mm (48") sweep and connecting up complete with electronic regulator stepped type and including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area, of reqd length from ceiling rose to procelain connector block of the fan, complete all as specified and directed.
S&F LED tubelight fitting 1x20 watt 230 Volt energy saver indoor domestic plastic extruded luminaire with decorative including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length for connection complete all as specified and as directed. Make : Cat Part No.CG LCCLB20-CDL of Make CG or equivalent model in Bajaj, Havells, Philips as approved by GE
S&F LED tubelight fitting 10 watt 230 Volt energy saver indoor domestic plastic extruded luminaire with decorative complete all as specified and as directed Make C&G or equivalent model in Bajaj, CG, Philips as approved by GE
S&F LED Security light fitting 25 watt 230 volts energy saver indoor domestic plastic extruded luminaire with decorative end caps, complete with all accessories & complete all as specified and directed including necessary brackets , GI pipe 32 mm dia 01.20 mtr Make : Cat Part No CG LSTP-30-CDL of CG or equivalent model in Bajaj, Havells, Philips as approved by GE
S&F exhaust fan, single phase, heavy duty,PVC frame 300 mm sweep, 1400 RPM including fixing of mounting frame in the round hole cutitng in the wall by means of rugged bolts, nuts and washers etc including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of exhaust fan complete all as specified and directed.
M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including galvnised steel earthing of strip 25x4 mm dia by means of bolts, nuts & checknuts and washers etc; GI pipe 40mm dia medium grade pipe for protection of G.I strip both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion .NOTE:-GI strip and GI pipe 20mm bore medium grade for encasing GI strip beyond 7.50m length per earthing if so required at site shall be measured and paid separately under relevant items.
S&F MCB SP&N 240 Volts up to 32 Amp 10 KA complete all as specified and as directed
S&F MCB single pole 240 Volts 6-30 Amp 10 KA complete all as specified and as directed
S&F MCB TP&N 415 Volts up to 40 Amp 10 KA complete all as specified and as directed
Supply install test and commissioning weather,dust and vermin proof LT cubical panel indoor type,as per IS- 8623, IP-54 fabricated with 2.00 mm thick CRCA sheet epoxy powder coted by means of electro staticgun after rigorous per treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces.The panel shall consist of 200 Amps rating busbar of high conductivity copper alloy of phases and half of neutral and shall be provided with colour coded head shrinkable sleeves. including bottom gland plate consisting of sufficient Nos of circular cable entry holes at bottom only with PVC/rubber bushes to prevent ingress of water / vermin etc.inside the encloser the required no of holes to be fixed with cromium plated brass cable glands for incoming and outgoing cables. with nessary internal wiring with stranded wire copper conductor PVC insulated cable and adequate size including connection. The panel shall be provided with separate compartments for each switch gear etc with double stud hinged door,front openable with locking arrangement and suitable for 1100 Volts grade, 3 Phase, 415V, 50 cycles, AC supply. The panel shall be fixed with angle iron frame made of angles of suitable size fixed on wall comprising the following with CPRI approved :
(a) Busbar of aluminium strips of 200 amps current capacity TPN, of length as actually required at side for three phases and half size for neutral, mounted on apoxy/FRP busbar insulators - 01 Set.
(b) MCCB 63A, 4 Pole 25 KA - 01 No ( incoming)
(C) MCB 40 A, 4 Pole 25 KA - 05 No ( Outgoing)
(d) LED type indicator lamp - 03 Nos
(e) Internal wiring with suitable size copper conductor PVC insulated heavy duty cable FRLS.
(g) Ameter 0 - 100 Amps with sutaible CTs - 01 No.
External water supply
M & L for valve pit chamber including necessary earthwork in any type of soil with PCC 1:2:4 type B2 using 20 mm graded stone aggregate in foundation and coping upto 100 mmm depth including PCC solid block masonary in walls in CM (1:6) and 10 mm thick plaster internally and externally in using CM 1:4 , MS sheet cover 6 mm thick with hinges and opening handle, locking arrangement fixed to angle iron frame made out of 50x50x6 mm duly painted with two coat of synthetic enameled paint over a coat of red oxide on all steel work and two coats of white washing on plastered surface of valve pit chamber of internal dimension 600mmx600 mmx600 mm for 50 mm dia valve complete all as specified and directed.
M & L for valve pit chamber including necessary earthwork in any type of soil with PCC 1:2:4 type B2 using 20 mm graded stone aggregate in foundation and coping upto 100 mmm depth including PCC solid block masonary in walls in CM (1:6) and 10 mm thick plaster internally and externally in using CM 1:4 , MS sheet cover 6 mm thick with hinges and opening handle, locking arrangement fixed to angle iron frame made out of 50x50x6 mm duly painted with two coat of synthetic enameled paint over a coat of red oxide on all steel work and two coats of white washing on plastered surface of valve pit chamber of internal dimension 1100mm x1100mmx900mm for 80/100 mm dia valve complete all as specified and directed.
M & L for valve pit chamber including necessary earthwork in any type of soil with PCC 1:2:4 type B2 using 20 mm graded stone aggregate in foundation and coping upto 100 mmm depth including PCC solid block masonary in walls in CM (1:6) and 10 mm thick plaster internally and externally in using CM 1:4 , MS sheet cover 6 mm thick with hinges and opening handle, locking arrangement fixed to angle iron frame made out of 50x50x6 mm duly painted with two coat of synthetic enameled paint over a coat of red oxide on all steel work and two coats of white washing on plastered surface of valve pit chamber of internal dimension 1300mmx1300mmx1000mm for 150 mm dia valve complete all as specified and directed.
M & L for cutting of cast iron water mains 150/200 mm dia in position for insertion of new tee branches etc complete all as specified and directed
M & L for cutting the existing road / hard standing surfaces to a depth of 75 cm and 60 cm width and getting out for laying under ground pipe including returning filling in , watering well ramming in layers not exceeding 25 cm in soil and filling the trench top with 15 cm PCC type B1 1:2:4 (using 20 mm graded) and making good the disturbed surface complete all as specified and directed.
External Electric Supply
Supplying and laying,connecting testing and HT cable 95 sqmm 3 core XLPE insulated, screened, PVC bedded,galvanised steel strip armoured, electric power cables (heavy duty), 11000 volts (E) with multistranded aluminium conductor , conforming to IS - 7088, part II EC 60502 Part I / ISImarked, laid in trenches or through GI pipes under floors, roads, ducts including connecting with proper size of copper lugs all as specified and as directed Note : GI pipes shall be measured and paid separatetly
Supplying,laying,connecting and testing LT cable 1100 volts XLPE insulated, screened, PVC bedded,galvanised steel strip armoured, electric power cables (heavy duty), with multistranded aluminium conductor , conforming to IS - 7088, part II EC 60502 Part I / ISI marked, laid in trenches or through GI pipes under floors, roads, ducts including connecting with proper size of copper lugs all as specified and as directed Note : GI pipes shall be measured and paid separatetly
(a) 300 Sqmm, 3.5 core
(b) 240 Sqmm, 3.5 core
(c) 120 Sqmm, 3.5 core
(d) 50 Sqmm, 3.5 core
(e) 35 Sqmm, 3.5 core
(f) 16 Sqmm, 4 core
(g) 10 Sqmm, 4 core
(h) 10 Sqmm, 2 core
(i) 6 Sqmm,2 core
Supply and fixing 3 way MS box of size 200x200x100 mm made up of 3 mm thick CRCA sheet powder coated single door with locking arrangement with suitable size aluminium bus bar 220 V mounted on and including heavy duty insulators and heavy duty connector block 1x10 A single pole MCB complete all as specfied and directed.
M & L for service bracket 1.5 m long made out of 40/ 32 mm dia medium grade GI pipe bend to shape fixed to pole with two nos suiatble size clamp made out of 3 mm thick MS flat iron duly painted with one coat of red oxide primer over a coat of synthetic enameled aluminium paint complete all as specified and directed.
Supply and fix of LED post top lattern light fitting for 1x50 watt LED lamp with all accesories complete all as specified and directed of Make HPL or equvivalent of crompton greaves , phillips, surya, havells.
Supply and fix to pole/wall LED light fitting for 1x50 watt with highly efficient nid power LED street light with pressure die cast aluminium housing , reflector and enclosed with toughened glass complete all as specified and directed of Make HPL or equvivalent of crompton greaves , phillips, surya, havells.
Supply and fix to pole/wall LED light fitting for 1x70 watt with highly efficient nid power LED street light with pressure die cast aluminium housing , reflector and enclosed with toughened glass complete all as specified and directed of Make HPL or equvivalent of crompton greaves , phillips, surya, havells.
M and L for Earthing complete with galvanised 'steel earth plate electrode 60×60cm× 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less'than 1.5 metres below normal 'ground level, connected to 'galvanised iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanised iron 'or steel . Earth wire protected by provision of GI medium grade pipe 40mm dia including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick RCC cover in CC 1:2:4 type B1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI medium grade 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR part I connected to earthing test 'point all as specified or indicated 'including testing on completion .NOTE:-GI strip and GI pipe 40mm bore medium grade for encasing GI strip beyond 7.50m length per earthing if so required at site shall be measured and paid separately under relevant items.
M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including galvnised steel earthing lead wire 4 mm dia, by means of bolts, nuts & checknuts and washers etc; GI pipe 15 mm dia medium grade pipe for protection of G.I earth lead wire, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion . NOTE:-GI earthing lead and GI pipe for encasing GI earthing lead beyond 7.50m length per earthing if so required at site shall be measured and paid separately under relevant items.
Design, supply, install, test and commissioning LT panel board CPRI approved double door factory fabricated outdoor type with locking arrangement comparmental type made out of 3.0 mm thick CRCA sheet powder coated and epoxy painted with two coats of synthetic enamelled paint over a coat of red oxide of size 1800x1500x600m complete mounted on and including MS angle iron frame made out of 65x6 thick of suitable size painted with black synthetic enameled paint over a coat of red oxide primer embeded in PCC (1:2:4) type B1 in foundation upto depth of 600 mm and 3000 mm above ground level including necessary excavation and earthwork suitable for housing and including the following accessories
a) MCCB TPN 400 amps 4 pole 35 KA with overload & thermal release setting - 01 No (incoming)
b) MCCB TPN 250 amps 4 pole 25 KA with overload & thermal release setting - 01 No (outcoming)
c) MCCB 160 Amp TPN 4 pole 25 KA with overload & thermal release setting - 04 No (outcoming)
d) MCB 63 amp 4 pole 16KA - 2 nos
e) Aluminium bus bar 400 Amp of suitable size-01 set
f) LED type indicator lamp - 01 Set
g) 3 pole Voltmeter with digital display -01 No
h) 3 pole Ammeter with digital display-01No
M & L for installation of feeder pillar box double door outdoor type factory made CPRI approved made out of 3 mm thick CRCA sheet powder coated and painted with coats of synthetic enamelled paint over a coat if red oxide with locking arrangementsof size 1500 x1200x450 mm complete mounted on and including MS angle iron frame made out of 40x6 mm thick of suitable size painted with black synthetic enamelled paint over a coat of red oxide primer embeded in PCC ( 1:2:4) type B 1 in foundation upto the depth of 300 mm and 300 mm above ground level including necessary excavation and earthwork suitable for housing and including the following accessories:-
a) MCCB TPN 250 Amps 35 KA ( incoming)-01 No
b) MCCB TPN, 100 Amps 25 KA ( outgoing) 2 Nos
c) MCC B TP 63 Amps 16 KA ( outgoing0) 2 Nos
d) MCB TPN 63 Amps 16 KA -02 nos
e) Ammeter, voltmeter -1 No
g) Aluminium bus bar 200 Amps 440V
M & L for installation of street light feeder pillar box double door outdoor type factory made CPRI approved made out of3 mm thick CRCA sheet powder coated and painted with coats of synthetic enamelled paint over a coat if red oxide with locking arrangementsof size 900x600x300 mm complete mounted on and including MS angle iron frame made out of 40x6 mm thick of suitable size painted with black synthetic enamelled paint over a coat of red oxide primer embeded in PCC ( 1:2:4) type B 1 in foundation upto the depth of 300 mm and 300 mm above ground level including necessary excavation and earthwork suitable for housing and including the following accessories:-
a) MCCB TPN 100 Amps 25 KA ( incoming)-01 No
b) MCCB TPN, 63 Amps 25 KA ( outgoing) 2 Nos
c) Atronomical time switch three phase 415 V suitable for indian region logitude / latitude with 3 pole ML 1 1.5 contactor suiatble for 10 KW complete with all accessories - 02 Nos
d) MCB SPN 40Amps 10 KA (outgoing) 08 nos
e) Heavy duty connector block assembly suitable for 10/ 16 Sqmm armoured cable -20 Nos
f) Aluminium bus bar 200 Amps 440V of suitable size
M & L for installation of distribution feeder pillar box double door outdoor type factory made CPRI approved made out of3 mm thick CRCA sheet powder coated and painted with coats of synthetic enamelled paint over a coat if red oxide with locking arrangementsof size 900x600x300 mm complete mounted on and including MS angle iron frame made out of 40x6 mm thick of suitable size painted with black synthetic enamelled paint over a coat of red oxide primer embeded in PCC ( 1:2:4) type B 1 in foundation upto the depth of 300 mm and 300 mm above ground level including necessary excavation and earthwork suitable for housing and including the following accessories:-
a) MCCB TPN 63 Amps 35 KA ( incoming)-01 No
b) MCCB TPN, 63 Amps 16 KA ( outgoing) 2 Nos
c) MCB SPN 40-63Amps 10 KA (outgoing) 12 nos
d) Aluminium bus bar 200 Amps 440V of suitable size
Supply ,fixing, testing and commissioning of air break gang oprated device triple pole, mechanically operated,outdoor type 'mounted on and including 11 KV HT porcelan insulator and steel channel 'frame, GI operating rod of 25 mm dia of suitable length with operating mechanism 'working from ground level,vertically operated including locking arrangement , handle suitable for 'current rating upto 200 amps 11000 volts working pressure complete all as specified and directed by Engr in charge Make:-Jaipuria Brothers or equivalant as approved by GE
Supply and fix dropout fuse unit mounted on channel base with fuse caring SRDP tube and having tinned non ferrour metal part and spring loaded phosphorous bronze contact suitable for current carrying capacity upto 25 Amps complete all as specified and directed Make:-Jaipuria Brothers or equivalant as approved by GE
M & L for LT end termination cable jointing kit suitable for 1100 volts grade 240/300 sqmm 3.5 to 4 core XLPE armoured / aluminium conductot cable outdoor heat shrinkable type with all jointing materials and accessories complete all as specified and directed Make;-M Seal/Denson
M & L for LT end termination cable jointing kit suitable for 1100 volts grade 50 to 70 sqmm 3.5 to 4 core XLPE armoured / aluminium conductot cable outdoor heat shrinkable type with all jointing materials and accessories complete all as specified and directed Make;-M Seal/Denson
M & L for LT end termination cable jointing kit suitable for 1100 volts grade 10 to 35 sqmm 3.5 to 4 core XLPE armoured / aluminium conductot cable outdoor heat shrinkable type with all jointing materials and accessories complete all as specified and directed Make;-M Seal/Denson
M & L for LT end termination cable jointing kit suitable for 1100 volts grade 6 to 16 sqmm 2 core XLPE armoured / aluminium conductot cable outdoor heat shrinkable type with all jointing materials and accessories complete all as specified and directed Make;-M Seal/Denson
ROAD,PATH/CULVERTS M&L for preparation of new black top surface and painting lines, dashes, letter , arrows etc of any width or girth on road pavement and like with 2mm thickness thermoplastic road marking paint white or golden yellow with glass reflectorised beads applied mechanically with thermoplastic applicator machines all as per manufactureers instructions complete all as specified and directed.
PROVISIONAL SUM Provision of tie beam over steel door in gun shed under item No 4 of Sch 'A' Part-I (Refer Appendix-'Z' on Srl Page No. 48)
NITYA NAND AND SONS CONTRACTORS PVT LTD
SOOD ASSOCIATES PVT LTD
M.R.Mutha Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
Download all tender documents and submit your bid