LOT3

Amount

Dismentalling old damaged CC/PC/BW work including proper disposal

First class brick work in 1 : 4 C.M. i/c cost of all material, labour, T&P etc.

12 mm thick C.P. in 1:4 C.M. after dismentlingh of old & damaged C.P. i/c cost of all material, labour, T&P etc. Complete.

Struck deep cement pointing in C.M. 1 : 3 i/c cost of all material, labour, T&P etc. complete

Providing and applying two coat of approved enamel paint over old painted surface with preparation of surface including cost of material, labour, T&P etc. required for proper completion of work.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron, using flats 30x6mm for diagonal braces & 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Applying weather coat paint of approved make and quality on old work with two coat to give an even shade including supply of all materials, labour, T&P etc. complete.

Wiring for light point/ fan point with 1.5 sq.mm PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch i/c cost of material, labour, T&P etc. required for proper completion of work.

Supply and fixing Galvanized Mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supply of C.P. teak wood batten 8 m.x1.cm.(3"x3/8")/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour,Tools & plants etc. required for proper completion of the work.

Providing and fixing at all height false ceiling of 4 mm thick phenol bonded Bamboo Mat board (595x595 mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 mm c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64 mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-incharge.

Supply and fixing of 12 Watt to 15 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect.

Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.

Supply and Erection of Ceiling fan with fan mortor of A.C permanent insulation, capacitor rating conforming BEE 5Star rating and IS:134/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts. 50Hz, 1-ph AC thr fan assemble should consist of down rod blades, sheckle canopies etc and with double fan bearing system

Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Providing Beldar for replacement/ rearrangement of T&P etc and cleaning road area of Bhola IH i/c all cost of labour, Contractor Profit etc. Complete.

Providing and fixing of 15 mm dia C.P. brass bib cock of approved quality for proper completion of work to the satisfaction of Engineer in charge of work.

Providing and fixing of 15 mm dia C.P. brass stop cock of approved quality for proper completion of work to the satisfaction of Engineer in charge of work.

Providing and fixing of 15 mm dia C.P. brass angle valve for basin mixer and geyser points of approved quality for proper completion of work to the satisfaction of Engineer in charge of work.

Providing and Placing on terrace polyethylene water storage tank ISI marked with cover and sutable locking arrangement and making necessary holes for inlets, outlets and overflow pipes but without fitting and the base support for proper completion of work to the satisfaction of Engineer in charge of work.

Providing and fixing of 15 mm dia C.P. ball valve (brass) ISI marked approved quality for proper completion of work to the satisfaction of Engineer in charge of work.

Providing and fixing white vitreous china wash basin 630x450mm with C.I. brackets, 15 mm dia C.P. brass piller tab, 32 mm c.p. brass waste of standard pattern including painting if fitting and brackets cutting and making good the walls wherever require.

Providing and fixing Anglo Indian W.C. Pan with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 ltr low level cistern i/c flush pipe, with all fitting and fixtures complete.

Scraping of grass, in lawn by Phawara removing/ scraping of earth from earth mixed grass including disposal debris and Levelling of Scraped surface.

Laying C.C. 1:2:4 with well graded stone ballast 5.6-22.5 mm size including cost fo material, labour, T&P etc.

Supply & laying of 80 mm thick Precated cement concrete Interlocking paver blocks ISI marked confimlng to lst 15658-2006 with top layer of minimum 5 mm thicknes of O.P. Cement, smooth high cross finish, skid rasistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg perNo. i/c cost of material, with blanket layer of 4.00 cm thick fine sand including labour, T&P, etc required for proper completion of work.

Providing and Laying Polished Granite Stone flooring with 18 mm thick stone slab over 20 mm thick base cement mortar 1:4 cm laid & joints with cement slurry & pointing with white cement slurry admixed with pigment of matching shade i/c rubbing, curing and polishing etc i/c cost of all material, labour, T&P etc. complete

Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc., by lying cement slurry mixed with water proofing cement compound consisting of applying i/c reparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Distempering two coat with oil bound distemper of approved brand and quality after two coat of wall putty including supply of all materials, labour, T&P etc. complete.

Supplying and fixing Main Gate, fixing it at boundary wall of the building i/c cost of all material, labour, T&P etc.Complete of work.

Providing & fixing turbine of panchakki made up with SS 304(blade) and sal wood(shaft) including fixing it at proper place also i/c cost of all material, labour, T&P etc.Complete of work as per direction of Engineer in charge.

Steel work in built up tubular railing (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

M/S RAKSHIT ASSOCIATES (BID ID -5512877)

M/S VASUDEV CONSTRUCTION (BID ID -5513724)

VIJAY ASSOCIATES (BID ID -5512225)