Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 67 RAMPURA GANDHI NAGAR JAMMU 180 004 J K | JAMMU | JAMMU | JAMMU AND KASHMIR | 180004 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹65.2 L
EMD Value
₹1.3 L
Closing Date
20 Jun 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DY. GENERAL MANAGER
Office of the Deputy General Manager, JKPCC Ltd., Unit Jammu.
Up-gradation of Revenue Training Institute Gole Gujral Jammu (Only Civil Part)
2022_PWDJK_173305_1
e-NIT NO. 10/JAMMU of 2022-23 Dt. 09-06-2022.
Open Tender
Civil Works
Item Rate
60 days
JAMMU
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
Yes
Financial Controller, JKPCC Ltd.
₹1.3 L
Yes
21 Jun 2022
9 Jun 2022
21 Jun 2022
9 Jun 2022
20 Jun 2022
9 Jun 2022
90 days
Amount
UPGRADATION OF MAIN BLOCK
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
Providing and laying P.C.C in1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying P.C.C in 1:3:6 (1cement:3 coarse sand: 6 graded Stone aggregate 20 mm nominal size) and curing complete
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) and curing complete
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
15 mm Cement plaster on the rough side of single or half brick walls of mix 1: 6 ( 1 cement : 6 fine sand ) on interior walls all complete Including making of groves and scaffolding etc. at all floor levels complete. ( including cost / carriage of material by Mechanical transport)
Providing and laying in position cement concrete of specified grade excl. the cost of centering and shuttering. All work up to plinth level 1:1.5:3 (1 cement: 1.5 fine sand: 3 graded stone agg. 20 mm nominal size) crushed.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels:- Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Size of tile 300x450 mm
Providing and laying Ceramic glazed floor tiles 300x300 mm Antiskid (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown
Distempering with dry distemper of approved brandand manufacture to give an even shade on new work over and including priming coat with water thinable cement primer.
Finishing walls with water proofing cement paint of required shade on new work.
Demolishing brick work manually inclduing stacking of serveciable material and disposal of unserveciable material in cement mortar.
Providing and fixing of 3.18 mm thick anodized alluminium work for doors , windows ventilator and partitions with extruded built up standard tubular section/ Z section and other section of approved make Hindalco or Jindal conforming to IS 733 and IS 1285 , fixed with dash fasteners of required dia and size incl. necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gaskets etc. Alluminium of section 101.6 x 44.45 x 3.18 mm shall be smooth , rust free, straight , mitred and jointed mechanically wherever required including cleat angle. Alluminium snap beading for glazing / panelling , C.P brass/ stainless steel screws, all complete as per architectural drawings and directions of the manager in charge ( ( glazing and paneling to be paid separately) Section used 101.6 x 44.45 x 3.18 mm ( fixed frames)
Providing and fixing of 3.18mm thick anodized alluminium (SHUTTERS)of approved make Hindalco or Jindal to IS 733 and IS 1250Window shutters having top. bottom and side rail 44.5 x 47.62 x 3.18mm with hinges 75mm ( 3 nos.) size incl. necessary filling up the gaps at junctions i.e at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aliminium of section shall be smooth , rust free , straight, mitred and jointed mechanically wherever required all complete as per architectural drawings and directions of the Manager in charge ( glazing and paneling to be paid seperately)
Providing and fixing 12mm thick prelaminated particle board in panelling fixed in aluminium frame of approved shade, brand and manufacture as approved by site incharge.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With floating glass panes of 5.50 mm thickness (weight not less than 13.50 kg / sqm)
Providing and fixing ACP sheet 5mm thick of approved brand, make and manufacture.
FORM WORK:- Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns etc. for mass concrete.
Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid of make Hindware/Cera/Jaquar only:- (incl. All Carriages)
Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. centre hole basin mixture, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps of make Hindware/Cera/Jaquar only:- (incl. All Carriages)
Providing and fixing white vitreous china pedestal for washbasin of make Hindware/Cera/Jaquar only:- (incl. All Carriages)
Providing and fixing stainless steel sink with Ci brackets , C P brass chain with rabber plug, 40mm CP brass waste and 40mm CP brass reception necessary, CP brass secrews complete. Size 470x420 mm
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge all complete of make hindware/Cera/Jaquar only:-. (With all Carriages)
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 32 mm dia (With Carriages)
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete ISI marked of make Saint Gobin or Modi float or equivalnet brand as approved by Engineer incharge at site:- (With all Carriages)
Providing and fixing waste coupling for sink or wash basin of quality and make as approved by Engineer - in - charge all complete (With Carriages)
Providing and fixing (C.P. Brass ) towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
Providing and fixing 100 mm CP grating (hole or without hole) for gully, floor or Nahani trap.ISI marked All complete of make hindware/Cera/Jaquar only:- (With all Carriages)
Providing and fixing unplasticised - Rigid PVC PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion;with necessary stays / clamps with fasteners having working pressure of 4kg/cm2 of make Supreme or finolex only :- all complete including testing of joints and pipes for leakage etc.:- (Including cost / Carriage of material by Mechanical transport)
50 mm dia
75 mm dia
110 mm dia
160 mm dia
Providing and fixing unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring & insertion rubber washer 3 mm thick conforming to IS : 5382 leaving 10mm gap for thermal expansion; with necessary stays / clamps with fasteners bolts and nuts complete; having working pressure of 4kg/cm2 of make Supreme or finolex only :- all complete including testing of joints and pipes for leakage etc.:- (Including cost / Carriage of material by Mechanical transport)
PVC PLAIN BEND (of required degree):-
50 mm dia.
75 mm dia.
110 mm dia
160 mm dia.
PVC DOOR BEND( of required degree):-
75 mm dia.
110 mm dia
PVC PLAIN TEE:-
50 mm dia.
75 mm dia.
PVC DOOR TEE:-
50 mm dia
75 mm dia.
PVC COUPLER/COLLAR:-
50mm dia
75mm dia
110 mm dia
PVC FLOOR/NAHANI TRAP:-
110 mm x 75 mm
110 mm x 100mm
Providing and fixing Soap dish (C.P. brass) with brackets ,nuts & screws complete etc. of make hindware/Cera/Jaquar only:- (With all Carriages)
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 of make hindware/Cera/Jaquar only:-. (a)15 mm nominal bore (With all Carriages)
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms of make hindware/Cera/Jaquar only: (With all Carriages) a) 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin/ wall mixer and geysers points of approved make conforming to IS : 8931 15 mm nominal bore of make hindware/Cera/Jaquar or as approved by site incharge (With all Carriages)
Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore (With all Carriages)
Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.(internal work) of make Jindal/Surya Prakash of medium class or as approved by site incharge (INTERNAL WORK-Exposed on wall) all complete including testing of pipes and fittings and joints for leakage with pressure pump etc. (Incl. all carriages)
15 mm dia. nominal bore (medium)
20 mm dia. nominal bore (medium)
25 mm dia. nominal bore (medium)
Providing & fixing BRASS BALL VALVE of approved quality conforming to IS : 8931 of make UNIK or DRP or as approved by site incharge (incl. all carriages)
25 mm nominal bore
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceilingtiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross- T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steelitems (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 31.21.1 With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles
Providing and fixing 12mm thick second class deodar wood wooden flooring with wooden planking, touged and grooved in flooring with screws complete job of approved shade, make and manufacture as approved by site incharge.
Supply and fixing of white board of training room of size 6feet x 3feet of approved shade, make and manufacture as approved by site incharge.
Supply and fixing of roller blindes for windows of approved shade, make and manufacture as approved by site incharge.
Reparing of terrace of mud phuska covered with tilesin cement by dismantling tiles, removing mud plaster, preparing the surface of mud phuska to proper slope, relaying mud plaster gobri leaping and tiles grouted in cement mortar (1:3) including replacing unserveciable tiles with new ones and disposal of unserveciable material to the dumping ground ( the cost of the new tiles paid seperatly).
Supply of bricks tiles.
Providing and laying water proofing treatment on roof of slab by applying cement slurry mixed with water proofing cement compound of approved brand, make and manufacture as approved by site incharge.
Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and sapling of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license] (incl. cost / carriage of material upto roof top).
Making plinth protection 50 mm thick of cement concrete 1: 3 :6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. (a) Crusher (Including cost / carriage of Mechanical transport)
Actual plumber and helper engaged for repair of old plumbing work including sewerage line, septic tank and other allied works.
Total plumber
Total helper
Actual labour engaged for cleaning of roof top accumulated with mulba and rubbish material and disposal of same and other allied works.
Total labour
Actual mason and labour engaged for repair of old civil i.e making gola alaround the terrace and repair of khurras work and other allied works.
Total mason
Total labour
Supply of cement
Supply of sand.
Supply of 20mm size agg.
Supply and fixing of carpet of second class quality of approved shade, make and manufacture as approved by site incharge.
UPGRADATION OF HOSTEL BLOCK
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Melamine polishing on wood work (one or more coats)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) complete.
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete.
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete With cement mortar 1:4
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
Repairing terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.
Supply of brick tile
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
Actual labour engaged for cleaning of roof top accumulated with mulba and rubbish material and disposal of same and other allied works.
Supplying and fixing new wooden fillets wherever necessary : 2nd class teak wood fillets
Renewing bottom rail and / or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer:
Supply of Second class deodar wood in planks
Actual carpenter engaged for repairing of wooden almirah, wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
Carpenter 1st class
Carpenter 2nd class
Supply of Pressed steel door frames (mild steel sheet 1.60 mm) profile 'c'
Actual Blacksmith engagaed for repairing of pressed steel door frame, window frame and refixing of repaired frames complete job
Ist class Blacksmith
2nd class blacksmith
Actual Mason and labour engagaed for repairing of Drain, Plinth protection all around the periphery of Building by way of laying p.c.c , plaster work including repairing of Manholes, septic, soakage tank and all other allied work complete
Mason
labour
Supply of cement
supply of sand
Supplyof aggregate
Supplying and fixing C.I. cover with frame for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.
Actual Technician and helper engaged for repairing of old damaged Aluminium doors Frames and shutters
helper
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge. 22.4.1 With Stainless Steel cover plate minimum 1.25 mm thickness.
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
Providing and fixing of Centre Hole Mixer
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. Of quality and make as approved by Engineer - in - charge.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe 32 mm dia
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
Providing and fixing PTMT grating of approved quality and colour.Rectangular type with open able circular lid.
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes
50 mm diametre
75 mm diametre
110 mm diametre
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
door bend
Single tee with door
Single tee without door
Floor Trap
Coupler
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall
15 mm dia. nominal bore
20 mm dia. nominal bore
25 mm dia. nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing of shower with shower arm complete of approved brand and manufacturer
Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440
Actual Plumber and labour engaged for doing repairing of old plumbing work at different location plumber
labour
UPGRADATION OF GUEST HOUSE INTO SUITE
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete With cement mortar 1:4
Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/10sqm) complete. Qty vide item 1-f
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Size of tile 600x600 mm)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class deodar wood
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood
Repairing terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.
Supply of brick tile
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
Providing and fixing false ceiling at all height 12.5 mm thick tapered edge gypsum plain board including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of approved shade, brand and manufacture as per approved by site incharge
Supply & fixing of roller Blind for windows of approved shade, brand and manufacture as approved by site incharge.
Actual mason and labour engaged foe doing repairing of old civil work at different location mason
labour
Supply of cement=
supply of sand
Supplyof aggregate
Sanitary & plumbing
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040mm bowl depth 250mm
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. Of quality and make as approved by Engineer - in - charge.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe 32 mm dia
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
Providing and fixing PTMT grating of approved quality and colour.Rectangular type with open able circular lid.
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes
50 mm diametre
75 mm diametre
110 mm diametre
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
door bend
Single tee with door
Single tee without door
Floor Trap
Coupler
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall
15 mm dia. nominal bore
20 mm dia. nominal bore
25 mm dia. nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing of shower with shower arm complete of approved brand and manufacturer
Note:- i) Including cost of all leads, lifts; & Carriage of material by Mechanical transport Complete.
Electromechanics Engineers And Contractors
M/S MAGOTRA ENGINEERS and CONTRACTOR
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .