8331 WELCOME MAINTENANCE AND REPAIRS TO PLASTERING, ROOF TREATMENT AND DAY TO DAY MAINTENANCE TO MARRIED ACCOMODATION AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

Taking down chowkats or frames n.exc 1.5 Sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed.

Description same as per item No.1 but exc 1.50 sqm and n.exc 4.00 sqm

Taking down shutters of any description n.exc 1 Sqm each and removing from site complete all as specified and directed.

Description same as per item No.3 exc 1 Sqm and n. exc 2 Sqm each.

Taking down shutters exceeding 1.0 Sqm and not exceeding 2 Sqm and refixing the same opening after modification if any complete all as specified and directed.

Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squar tube and fixing in opening as per specification complete all as specified and directed.

Material and labour factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and directed.

Material and labour Flush door shutters, 30mm thick, solid core construction, with both faces covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Supply and fixing glazed or gauged shutter 35 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and as directed.

Supply and fixing glazed or gauged shutter 30 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (b) complete all as specified and as directed.

Material and labour for Plain, solid, straight chowkats and frames in 2nd class hardwood , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with additional rebates for fixing second shutter complete all as specified and as directed

Supply and fixing stainless steel butt hinges medium weight 100mm long complete all as specified and as directed.

Supply and fixing in repairs stainless steel butt hinges medium weight 100mm long complete all as specified and as directed.

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and as directed.

Supply and fixing in repairs Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and as directed.

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and as directed.

Supply and fixing in repairs Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and as directed.

Supplying and fixing aluminium anodised barrel tower bolts of extruded section 150 mm complete all as specified and as directed.

Supplying and fixing in repairs aluminium anodised barrel tower bolts of extruded section 150 mm complete all as specified and as directed.

Supplying and fixing aluminium anodised barrel tower bolts of extruded section 100 mm complete all as specified and as directed.

Supplying and fixing in repairs aluminium anodised barrel tower bolts of extruded section 100 mm complete all as specified and as directed.

Supplying and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and as directed.

Supplying and fixing in repairs Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and as directed.

Supplying and fixing Extruded aluminium handles fabricated type anodised 100mm long complete all as specified and as directed.

Supplying and fixing in repairs Extruded aluminium handles fabricated type anodised 100mm long complete all as specified and as directed.

Material and labour for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and as directed.

Supply and fixing in repairs for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and as directed.

Supply and fixing in repairs rubber door seal/snake guard with 25mm wide aluminium strip fixed at bottom of door to prevention from snakes/insects as per sample complete all as specified and as directed.

Supply and fixing 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fixing in repairs 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Supply and fixing in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified and as directed.

Supply and fixing aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified and as directed.

Material and labour for hacking our old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing sheet glass ordinary quality 3mm thick in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed..

Material and labour Powder coated Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

Material and labour Powder coated aluminium window shutters, Top hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified.

Supply and fixing Figured glass 4.0 mm thick pin headed type and glazing wth oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing in repairs 100mm Hasp and staple, safety type, anodised aluminum with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing in repair 20mm dia curtain rails, aluminium anodised with fixing brackets,stops, rollers etc. complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified.

Material and labour for pre-laminated particle board 18mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply & Fixing in repairs of stainless steel Handle fancy type 100 mm size complete all as specified and directed.

Supply & fixing in repairs of stainless steel hinge of size 65 mm self closing Italian patter suitable for cabinet and shelves opening / closing operation (fancy type) complete all as specified and directed

Material and labour for PVC edge lipping, 3/4mm thick fixed with nails for 18/19 mm thick pre-laminated partical board & shutters & etc, all as specified and as directed.

Supply & Fixing in repairs of Magnet of suitable size fixed for cabin leafs, drawers etc complete all as specified and as directed. Make : Royal or equivalent

Supply & Fixing stainless steel roller of size 25mm x 12mm, male female rolling brackets suitable for baskets complete all as specified and directed. Make : Evershine,Olive or equivalent

Material and labour for servicing of modular kitchen cabinets including taking down baskets and refixing in the same opening after realigned the sliding channel, easing and serviceable complete all as specified and as directed.

Supply and fixing in repairs of Designer Stainless steel baskets of any type and any size of length n.exc 750mm and depth n.exc 500mm and height n.exc 200mm complete all as specified and as directed.

Taking down unserviceable IWC & Supply & fix Vitreous china squatting pan 'Orissa' pattern of size 580mm ˣ 440mm white withintegral foot rest excluding flushing cistern & flush pipe including provision of lime concrete bedding complete all as specified and as directed.

Supply and fixing in repairs Vitreous china wash down water closet pan pedestal pattern (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed by EIC.

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc., complete all as specified and as directed.

Supply and fixing in repairs Hand shower health faucet Abs body with wall hook and 1 meter long easy flex tube in chrome finish hose pipe for EWC including hinges with complete fitting complete all as specified and as directed. : Make Jaquar (ALD -579) or eqivalent as approved.

Material and labour WC connector 110 mm PVC SWR for WC complete all as specified and directed.

Material and labour for taking down steel tubing and connections of 15 mm dia with all fitting complete all as specified and as directed.

Material and labour for taking down steel tubing and connections of 20 mm dia with all fitting complete all as specified and as directed.

Fixing only GI pipes of any grade of about 15mm bore diameter to walls, ceilings and in floors complete all as specified and as directed..

Fixing only GI pipes of any grade of about 20mm bore diameter to walls, ceilings and in floors complete all as specified and as directed..

Supplying and fixing or laying 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

Supplying and fixing or laying 25 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

Cutting chases in brick work, pinning in making good to facing where required and pointing to cement mortar 1:3 to ends for concealed water tubing and making good for cutting n.exc 10 cm girth complete all as specified and as directed..

Supplying and fixing in repair stop valves fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe complete all as specified and as directed.

Supply and fixing in repair Angular cock with Flange, fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe (Make: Jaquar, Code No - AQT-CHR-3057) complete all as specified and directed

Supply and fixing,in repair 15mm bore fancy type chromium plated two way bib taps, with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Jaquar (CON-041KN) or equivalent as approved.

Supply and fixing in repairs 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

Supply and fixing in repairs pillar taps,15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shankSupply and fixingly nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair 100mm dia Stainless steel anti cockroch trap including chrome finished jali with provision to receive the waste water pipe and fixed with white cement all around complete all as specified.

Supply and fixing in repair vitreous china wash basin size 550 x 400 mm white flat back excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

Supply only waste fittings brass chromium plated 32 mm for sinks/basin etc with long screwed shanks and fly nuts flange end complete all as specified and as directed.

Supply and fixing PVC bath cabinet with built in shelf and looking mirror at shutters of size 54 x35x 13 CM complete all as specified and as directed.

Supply and fixing sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

Supply and fixing stain less steel plate rack fixed on wall etc complete, made out of 1.00 mm thick of over all size 0.75 x 0.75M with shelves and racks complete all as specified and as directed.

Supply and fixing in repairs bib taps 15mm bore, Chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Taking down unservicable shower rose and supply and fix brass chromium plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated complete all as specified and as directed.

Supply and fixing in repairs corner glass shelf (with brackets) complete all as specified and as directed. Make : Jaquar Code No : CAN-1173 or equivalent as mentioned in PS.

Supply and fixing in repairs Glass shelf (with brackets) 600mm long complete all as specified and as directed.

Supply and fixing in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Pt- I.

Supply and fixing in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Pt- I.

Supply and fixing in repairs of ball brass valve, high pressure with polythene float and fly nut,screwed for iron pipe or brass ferrule of size 20 mm complete all as specified and as directed.

Supply and fixing in repairs Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm dia complete all as specified and as directed.

Material and labour for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fixing in repairs flexible PVC waste pipe of size 32mm dia used for wash basin & sinks complete all as specified and as directed.

Supply and fixing in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Material and labour for opening of GI/CPVC pipe/taps of any dia and finding out the block in pipe line/taps and clearing the air lock problem of all bath rooms/kitchen/toilet including necessary tools and washers etc complete all as specified and as directed.

Supply and fixing in repairs PVC water tank cover, black/any colour suitable to the existing PVC water tank 500/1000 ltrs capacity complete all as specified and as directed

Dismantling of cast iron/PVC drain pipes jointed in cement mortar and taking out of walls for 75mm/100mm dia of Pipe.

Supply and fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints 75 mm dia bore pipe,fixed to walls complete all as specified and as directed.

Description same as per item No 93 above but 110mm dia of pipe

Supply and fixing fix PVC (SWR) branch piece single Y equal or unequal 75mm with access door complete all as specified and as directed.

Supply and fixing fix PVC (SWR) branch piece single Y equal or unequal 110 mm with acess door complete all as specified and as directed.

Supply and fixing fix PVC (SWR) bends 75 mm with access door complete all as specified and as directed.

Supply and fixing fix PVC (SWR) bends 110 mm with acess door complete all as specified and as directed.

Supply and fixing PVC (SWR) floor trap, plain with gtrating including jointing with solvent cement 75 mm dia outlet complete all as specified and as directed.

Supply and fixing in repairs Door closer Aluminium Extruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Supply and fixing PVC (SWR) multi floor trap with grating including jointing with solvent cement of outlet dia 75mm complete all as specified and as directed.

Material and labour for complete removal of existing loose concrete of wall, chajjas etc in any position and washing down with water and cleaning the surface from all loose dirt chalk grease, algae and fungal flakes etc and applying FOSROC NitoZinc primer on TMT bars and applying FOSROC Nitobond EP (Epoxy bonding agent for joining old and new concrete) and fill up all cracks with CM 1:3 and applying two coats of exterior weather proof paint over a coat of primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level) including removing the debris off from MoD land complete as directed by Engr-in-Charge.

Material and labour for 40mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor complete all as specified and as directed.

Material and labour for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone wall as in jambs & cills etc incl raking not joints scrubbing down with water all as specified.

Material and labour for rendering 15mm thick in two coats (10+5) on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for rendering 10mm thick on brick or concrete surfaces in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for rendering 5mm thick in CM 1:3 on brick or concrete surfaces as in ceiling finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces & applying 2 coat of cement base paint over a coat of alkali resistant priming paint on walls complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall by vacuum based sanding machine, applying two coats of superior quality anti algae weather proof acrylic paint exterior grade on external surface over a coat of primer by auto roller complete all as specified and as directed as per manufacture's instruction.

Material and labour for preparation of newly plastered surfaces & applying three coat of white wash on walls complete all as specified and as directed..

Material and labour for preperation of newly plastered surfaces of wall by vaccum based sanding machine, applying 1mm thick wall care putty (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat of emulsion distemper white or coloured by auto roller complete all as specified and as directed as per manufacture's instruction.

Material and labour for preparation of newly plastered surfaces & applying three coat of white wash on ceilings complete all as specified and as directed..

Material and labour for preparation of plastered or unplastered old surfaces of walls and apply one coat of white wash complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered old surfaces of ceiling and apply one coat of white wash complete all as specified and as directed.

Material and labour for preparing old distempered surfaces by washing down applying one coat of Oil bound distemper complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by vaccum based sanding machine removal of nails etc & filling cracks/hole with putty, applying 1mm thick wall care putty (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat of emulsion distemper white or coloured by auto roller complete all as specified and as directed as per manufacture's instruction.

Material and labour for preparing old decorated wooden or wood based surfaces over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for prepararing old decorated steel surfaces by washing down over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by vacuum based sanding machine and removal of nails etc. and filling cracks /hole with putty and and applying Two coat of superior quality anti algae weather proof acrylic paint exterior grade on external surface over a coat of primer by auto roller complete all as specified and directed as per manufacture's instruction..

Material and labour for applying one coat of weather coat floor protector on Chequred tiles/Interlocking paver block of any colour and preperation of floor surfaces with wire brush and removal of all dust particles and washing the surface with water before applying the paint complete all as specified and as directed.

Demolition of brick tiles or terracing tiles, single layer on roofs including cement screed in roof complete all as specified and directed.

Removal of existing APP membrane and bitumen coats on roof surfaces and removing from the site complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for padding concrete upto existing RCC roof top complete all as specified and directed.

Material and labour for providing 40mm thick cement concrete of type B-1, 1:2:4 (20mm graded aggregate) with water proofing compound @0.2% by weight of cement even and fair surface complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately.

Material and labour 10mm thick plastering on fair faces of concrete surface in CM 1 : 4 with water proofing compound @ 0.2% by weight of cement even and fair surface complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately.

Material and labour for Applying evenly a priming/tack coat with bituminous primer at the rate of 0.50 Kg / Sqm on roof complete all as specified and as directed.

Material and labour APP based polymeric water proofing membrane minimum weighing 3Kg/ Sqm minimum 3 m thick reinforced with polyster non-woven fabric (weight not less than 150 gms/Sqm) laid over primed roof surfaces by forced application and vertical surfaces up to grooves and width of overlap 75mm at the sides and 100mm in ends and applying coat of hot blown bitumen 85/25 at the rate of 1.20 Kg per Sqm over APP membrane and applying two coats of heat resistant paint complete all as specified and as directed.

Supply only liquid Water Proofing compound.

m/s m valasubramanian

JR ENTERPRISES

THIRUMURUGAN ENTERPRISES

CHANDRASEKRAN ENTERPRISES

VVM CONSTRUCTIONS