Firefighting facilities at 3rd Oil Jetty (HOJ-III)

Amount

Design, Supply, Erection, Testing & Commissioning of Electric motor driven jockey pump of 70 m³/hr discharge & 160 m head, as per Technical Specification & scope of work.

Design & Supply

Erection, Testing & Commissioning

Design, Supply, Erection, Testing & Commissioning of Remote operated 6” Tower monitor on 20 mtr high tower, capacity 6000 LPM (complete with panel & accessories), as per Technical Specification & scope of work.

Design & Supply

Erection, Testing & Commissioning

Design, Supply, Erection, Testing & Commissioning of Ground Monitor with isolation valve at elevated level with all insert plates, fixtures, clamps, SS fasteners pressure gauge dial type 150 mm size connected at monitor inlet pipe and supporting for riser pipe and monitor, orifice plates suitable to discharge 3000 LPM capacity at 12.25 kg/cm² with a horizontal throw range of 75m with electrical/electrohydraulic equipments for horizontal and vertical rotation with base operation

Design & Supply

Erection, Testing & Commissioning

Design, Supply, Erection, Testing & Commissioning of SS-316 size 63mm Double Headed Fire Hydrant with(landing valves as per BIS:5290) and isolation valve (100 NB), SS-316 with orifice plates to be placed below each hydrants and separate controls fitted with 63 mm instantaneous female coupling on each outlet along with 2 nos hose box stand with 15m long hose pipe each with end coupling with nozzles , as per Technical Specification.

Design & Supply

Erection, Testing & Commissioning

Design, supply, erection, testing & commissioning of the following ERW steel pipe - internal cement lined along with bends, tees, reducers flanges, gaskets, bolt-nuts, washers, u-clamp supports and any other fitting, painting as applicable, as per Technical specification for above ground piping system including Excavation back filling of trench and interconnection between existing and new facilities, as per Technical Specification.

Design & Supply

Erection, Testing & Commissioning

Design, supply, erection, testing & commissioning of the following Stainless-Steel pipe for Foam line etc.-internal cement lined along with bends, tees, reducers flanges, gaskets, bolt-nuts, washers, u-clamp supports and any other fitting, painting as applicable, as per Technical specification for above ground piping system including Excavation back filling of trench and interconnection between existing and new facilities, as per Technical Specification.

100 NB Pipe

75 NB Pipe

40 NB Pipe

Design, supply, erection, testing & Commissioning of the following types of Valves, as per Technical Specification.

Design & Supply

400 NB Gate Valve (CI)

350 NB Gate Valve(CI)

250 NB Gate Valve(CI)

75 NB Gate Valve(CI)

50 NB Gate Valve(CI)

50 NB Brass

350 NB NRV

400 NB Gate Valve (CI)

Erection, Testing & Commissioning

400 NB Gate Valve (CI)

350 NB Gate Valve(CI)

250 NB Gate Valve(CI)

75 NB Gate Valve(CI)

50 NB Gate Valve(CI)

50 NB Brass

350 NB NRV

400 NB Gate Valve (CI)

Design, supply, erection, testing & Commissioning of Hose box (750mm x 600mm x 250mm) along with 2nos.hose (IS-636: 63mm dia x 15 m long) each connected with end couplings (IS-903) , 2 nos. Branch pipe with nozzles (IS-903), as applicable, as per Technical Specification.

Design & Supply

Erection, Testing & Commissioning

Quick Release Mooring Hook

Design & Supply

Erection, Testing & Commissioning

Water curtain nozzle

Design & Supply

Erection, Testing & Commissioning

Manual Call Point(MCP) for emergency Response audiovisual alarm at control room.

Design & Supply

Erection, Testing & Commissioning

Design, supply, erection, testing & Commissioning of Portable fire extinguisher, as per Technical Specification.

Design & Supply

9 kg. Capacity dry chemical

6.9 kg capacity CO2 extinguishers on wheel

75 kg capacity wheel mounted dry chemical powder fire extinguisher

Erection, Testing & Commissioning

9 kg. Capacity dry chemical

6.9 kg capacity CO2 extinguishers on wheel

75 kg capacity wheel mounted dry chemical powder fire extinguisher

Dismantling of old MS works in joists, angles, plates, bracings, pipes of different sizes etc. including cutting rusty bolts and nuts etc. from damaged / corroded structures of jetty and stacking the materials at shore within 150 mtr. lead. Include for loading the dismantled steel materials into truck at Oil Jetty No 3 area, carriage of the materials overpucca road lead upto 2 Kms. and unload at the RZ Store of I&CF Division after weighment, stack properly in stack yard etc. as directed including carriage by head load upto a lead of about 30 m of each of the two points.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections, plates etc conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting including surface preparation with painting related to Tower Monitor-2.

Main Fire water Pump with Diesel Engine(Capacity 900m³/hr, Head 160m)

Design & Supply

Erection, Testing & Commissioning

HINDUSTAN CONSTRUCTION CORPORATION

DES TECHNICO LIMITED

Technico India Pvt Ltd