CERTAIN MISC REPAIRS TO RCC PLASTERING VARIOUS TYPES OF FLOORING SANITARY FITTINGS PLINTH PROTECTION ETC AT CERTAIN BUILDINGS OF ITR TECH AREA AND LCI LCII LC III OF ITR CHANDIPUR

Amount

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level)

Demolition of brickwork or stone boulder masonry built in cement or cement lime mortar

Demolition of cement concrete (Reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

M&L for brick work with Fly ash brick straight or curved on plan exc 6m mean radius in cement mortar 1:6

M&L for brick work with Fly ash brick half brick thick size straight or curved on plan exc 6m mean radius in cement mortar 1:4

M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

Form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exceeding 200mm thick rough finished

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces

M&L for Plain cement concrete C-1 type 1:3:6 (20mm graded aggregate) 75mm thick as in plinth protection/path.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M&L for 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate to receive tiles.

M&L for 10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados

M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles

M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles

M&L for joint free Glazed ceramic coloured tiles in vertical surfaces (450 x 350mm) 7mm/ 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match, with backing coat 10mm thick in CM 1:3.

M&L Vitrified light shade tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc jointed in neat slurry and pointed in white or coloured cement to match the shade using coloured tiles

All as per item No 19 above but as in skirtings/ dado.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc.

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall

Supply only intergral water proofing compound (liquid admixture)(Makes : pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for 15mm thick in cement plaster CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement on wall

M&L for 10mm thick in cement plaster 1:6 on brick or concrete surfaces finished even and smooth without using extra cement on ceilings

M&L for three coats of white wash as in ceilings on newly plastered surfaces including preperation

M&L for prepartion of newly plastered surfaces and priming plastered surfaces with alkaliresistant primer paint and applying two coats of oil bound distemper on walls.

M&L Preparation of new plastered surfaces and applying two coats of exterior emulsion paint over a coat of primer on walls (make Appex etc.).

Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, approons etc

M&L Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick Screed bed or backing coat for laying floor finishes in CM 1:6

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store

S&F 15mm dia Tubes medium grade galvanised with all fittings and fixed complete to walls, floor etc.

S&F 20mm dia Tubes medium grade galvanised with all fittings and fixed complete to walls, floor etc.

Cutting, chases for concealed water tubing and making good in CM 1:3 cutting not exceeding 10 cm girth in brick wall.

Fixing only, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm bore obtained from item No 32 including cleaning threading if required all as specified

Fixing only, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20mm bore obtained from item No 33 including cleaning threading if required all as specified

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete

Supply and fix Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding in repairs

Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs.

Supply and fix PVC connection 15mm size with PTMT nuts of length 450mm.

S&F vitreous china wash basin, white, flat back size 600x480mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets in repairs

S&F in repair Vitreous China urinals,full stall type white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe and Waste coupling 32mm dia menimum weight 45 gms.

S&F in repair pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high presure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weigt 60gm)

S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 litre including HDPE Nipple and dismantling of Old water tank any type

S&F in repair Ball valves in repair high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 & n.exc 500 ltr and from mouths of circulating pipes, etc.

S&F Stop valves in repair cast copper alloy fancy chromium plated with long shank and cup( concealed) long shank 15mm bore fixed in repairs

S&F in repairs 15 dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore in repairs

S&F tubular towel rail 20mm dia brass chromium plated D type 60cm long between flanges

S&F PVC (SWR)multy floor trap/nahni trap 75mm dia outlet, plain with grating including jointing with solvent cement in repairs

S&F 110mm PVC (SWR) pipes single sockected in any length with rubber ring joints fixed to walls. (SUPREME/PRINCE/ORIPLAST) including demolition of 100mm AC pipe

S&F PVC (SWR) bends any radius of bore 110mm with access door (SUPREME/PRINCE/ORIPLAST)

S&F PVC(SWR) junction duble (Double T) equal or unequal of bore 110mm bore incl provided with access door (SUPREME/PRINCE/ORIPLAST)

S&F 75mm PVC (SWR) pipes single sockected in any length with rubber ring joints fixed to walls. (SUPREME/PRINCE/ORIPLAST) including demolition of 75mm AC pipe

S&F Grating doom 125mm dia with waste hole of PTMT(mInimun weight 40gm)

S&F 40mm bore PVC pipes (LDPE) of pressure rating 6kg/sqcm and fixed complete to walls, ceilings or in floors

S&F in repairs seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device

S&F sinks with draining board made of stainless steel 1mm thick kitchen with plug washers & wastes incl bedding in cement mortar, fixing cantilever brackets & connecting union to pipe overall size 915x460mm bowl size 410x330x160mm

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as directed by Engineer-in-Charge.

All as per item No.63 above but exc 1.5 Sqm and n.exc 4 Sqm each.

Taking down shutter of any description n.exc 1.0 Sqm each

All as per item No.65 above but exc 1.0 Sqm and n.exc 4.0 Sqm each.

M&L 2nd class Hard Wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed by Engineer-in-Charge.

S&F 35 mm thick factory made plain framed panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or veneered particle board, medium density, wood particle board with commercial face veneers complete all as directed by Engineer-in-Charge.

S&F 2nd class hardwood glazed & skeleton shutters, 30 mm thick open rebated & prepared to receive glass, gauze etc for windows, ventilators for etc provided with stiles & rails & divided into square with plain chamfered or mitred & rebated sash bars any numbers.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded both side Prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of both side Prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F Butt hinges mild steel 100mm long, medium weight, cooled rolled.

All as per item No. 72 here-in-before but 75mm long.

S&F 250 mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as directed by Engineer-in-Charge.

S&F 125mm long extruded Aluminium alloy handles, fabricated type anodised.

S&F 150mm long extruded Aluminium alloy handles, fabricated type, anodised.

S&F 125mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed.

S&F 150mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed.

S&F sheet glass 4.8/5 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each

S&F Fingured glass, pin head type and glazing with oil putty/ beading in square n exc 0.5 sq.m in each pane

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as directed by Engineer-in-Charge.

M & L PCC type C1 (1:3:6, using 20 mm graded stone aggregate) for fixing of hold fast.

S&F MS hold fast made out of 25x 3mm flat iron dully cutting/barding of required size.

M&L Preparing surfaces of wood and wood based materials of any description and girth, back of chowkhat etc area tarred exc 0.1 Sqm but n.exc 0.5 Sqm each and treated with coal tar black paint.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surfaces width or girth exc 10cm including preperation of surfaces

S&F Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length 140 mm of cover plate

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty complete all as directed .

S&F in repair door closer hydraulically regulated, designation No.3 universal type door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed ® 09155, (aluminium body ) suitable all as specified and as directed .

S&F in repairs seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device

S&F shower rose swivel type PTMT any colour for fixing with 15mm pipe

S&F in repair 15 mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length 140 mm of cover plate

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe.

S& in repair Vitreous China urinals,halfl stall type white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe and Waste coupling 32mm dia menimum weight 45 gms.

S&F Linoleum flooring 2.0mm thick plain or coloured, laid dry in floors including stretching, cutting and fitting , sealed down with an approved adhesive, including dimantling of existing floor hearts

M/SNeelachal Enterprises

RANA ENTERPRISES

ARIN AND COMPANY

DS ENTERPRISES

Ajay Associates

M/S T.N.CONSTRUCTION

MS SUBHAM ENGINEERING AND CO