CONSERVATION AND DEVELOPMENT OF SARJAVAV BAVDI, SIROHI

Amount

Consolidation of woodwork with sawdust and polyster resin of low viscosity, wherein the work needs to completed in similar application and then smoothen and finished as per the Engineer incharge.

Silt and Sludge clearance including necessary dewatering of the entire water body with sewage pumps or with labour/sweepers etc. to clean all the water sources below and on the sides of the Pond complete and disposal of the sludge including all leads and lift to some remote dumping ground, location of such dumping ground will be the responsibility of the Contractor and he has to comply with all statutory requirements. The work to be strictly executed as per the direction of engineer in charge and as per the site condition.

Careful demolition of damaged portions of cornice bands, mouldings and other decorative features without causing any dust nuisance taking care to avoid any damages to the adjacent details which are in good condition. Item to include disposal of the same up to 100 metre lead including scaffolding etc. complete

Removal of stains, dirt, blackening and other contaminants from Lime Stone by using the solution of mild, non Ionic, non acidic, pH neutral soap diluted with water. (For surfaces which do not get submerged)

Pointing of raked out joints of Random rubble masonry by using lime mortar 1:1:1 (1Lime:1coarse sand:1Brick jeera)

Finished & machine cut edges 75 mm thick stone slab for counters and benches over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. : Red sand stone (Jodhpur Stone)

P & F of IP65, IK10 protected LED underground fixtures. Fixture made of powder coated die cast aluminium with Toughened Glass cover and appropriate beam angle lens to be used as per requirement. The System level Luminous efficacy must be >90 Lumen/W. High Power LEDs at 1W/2W per LED. The driving current should be Minimum 350 mA per LED. CRI>80, CCT: 3000/6500 K. The integral SMPS based electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency >85%, PF>0.9 and input Voltage range of 90-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Yellow color as per engineers choice. Fixture must be in compliance with IS/CE Standards of Phillips or equivalent make. LED underground fixtures 7W

Providing and fixing floor mounted wall washers - 30 watt, 1800 Lumens, warm white of Phillips or equivalent make as approved by Architect and Engineer incharge.

Providing and fixing wall mounted wall washers - 15 watt, warm white of Phillips or equivalent make as approved by Architect and Engineer incharge.

Providing and fixing wall mounted bracket Lights - 15 watt, warm white of Phillips or equivalent make as approved by Architect and Engineer incharge.

Supply Installation, Testing & Commissioning of 4Port Giga PoE Switch with SFP uplink ports: Two-layer unmanaged PoE switch; 4*10/100 Base-T PoE; 2*10/100/1000 Base-T (Uplink); One Port Hi-PoE support up to 60W; rest PoE ports power consumption per Port: Up to ≤30W; PoE Protocols: IEEE802.3af, IEEE802.3at, Hi-PoE; Switching Capacity: 6Gbps or better; MAC Table Size 8K or better; Working Temperature: -20°C~65°C or better; Power supply: DC48~57V

Supply & installation of 600 VA UPS with following specifications :- Output power capacity. 360 Watts / 600VA. Output Connections. (3) India 2/3-pin 6A (Battery Backup) Nominal Output Voltage. 230V. Nominal Input Voltage. 230V. Input Connections. India 3-pin 6A. Cord Length. 1.2meters. Make:- APC/ Luminous/ VGUARD/ Microtek

Accessories:- Supply & Fixing of Outdoor Junction box for switch, power supply for camera & switch, UPS and camera stand and other accessories.

Supply Installation, Testing & Commissioning of Optical Network Unit(ONU)1*Gigabit , 1*PON port plastic case with Routing as per attached tender specification & approved makes