Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.3 LAccepted-AOC D 2 ABHILASHA APARTMENT 11 A PURULIA ROAD RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹48.6 L+₹3.3 L (7.39%)Rejected-Finance CHESHIRE HOME ROAD SHAKTI KUNJ BARIATU RANCHI 834009 | RANCHI | JHARKHAND | 834009 | L2 | Rejected-Finance Quoted amount is more than L1 |
Tender Value
₹43.3 L
EMD Value
₹86,700
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S Rakesh
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
CERTAIN B/R AND E/M SANCTION WORKS AT OLD ILP LOC OF 12 DOGRA, 124 INF BDE, MES IB AND SPL REP FOR REPLACEMENT OF SUMMER APPLIANCES AGAINST BER UNDER GE RANCHI
2022_MES_523991_2
8200/1408/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class D Cat a (i) and b(i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹86,700
Yes
13 Aug 2022
8 Jul 2022
28 Jul 2022
9 Jul 2022
26 Jul 2022
9 Jul 2022
Amount
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and get ting out, complete all as specified and directed.
Excavation in trenches not exc 1.5 wide & not exc 1.5m in depth for foundation etc and getting out in Soft/loose soil, complete all as specified and directed.
M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.
Returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick as in soft /loose soil, complete all as specified and directed.
Removing excavated materials n exc 50m and depositing where directed a level n exc 1.5mm above the starting point, complete all as specified and directed.
Damp proof course In cement concrete 1:2:4, type B-0 40mm thick to horizontal or vertical surfaces including nec- essary formwork, complete all as specified and directed.
S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, Tee, Angle, Channel or flats sections ) including cleats and distance pieces using steel of grade Fe 290 (Gde E-165).
Preperation of newly steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L for 6 mm th asbestos cement corrugated or semi corrugated sheets in roof , wall etc fixed using 'J ' hooks or 'L'hooks etc, complete all as specified and directed.
S&F MS wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.
S&F factory made prelam solid PVC door frame of size 50 mm x 47 mm made out of 5 mm both side prelam PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification and drawing and as directed (Rajshree brand or equivalent), complete all as specified and directed.
S&F factory made solid panel both side prelam PVC door shutter with feathered edge 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded prelam coloured PVC ‘C’ channel having a PVC sheet strip of 30mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing and as directed (Rajshree brand or equivalent)
S&F 200 mm aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and shiding bolts of extruded sections or cast aluminium alloy and fixed,
S&F 100 mm butt hinges, medium weight, extruded aluminium alloy with galvanised mild steel hinge type B-22, complete all as specified and directed.
S&F aluminium ,anodized 200mm long barrel tower bolts of extruded section, complete all as specified and directed.
S&F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm, complete all as specified and directed.
S & F anodised aluminium Ventilators, fixed type, without sash bars complete with shutter and chowkhat/frame, aluminium section of standard weight including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws etc including locking arrangement, complete all as specified and directed.
S&F 5mm thick tinted glass selcted quality as approved by Engr-in-Charge in squares n exc 0.50 Sqm in each pane, complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in lintels Cills, Steps, Plinth courses, Railings, Copings, Bed plates , kerbs etc. inlcuding weathering slightly rounded or champfered angles and throating etc, complete all as specified and directed.
M&L rendering 15mm thick in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.
M&L rendering 15mm thick in CM 1:4 on fair faces of brick work , finished even and smooth without using extra cement, complete all as specified and directed.
M&L three coat of white wash on newly prepared surfaces on wall /ceiling, etc, complete all as specified and directed.
Spreading and leveling in layer not exc 25 cm thick well ramming including watering, complete all as specified and directed.
M&L PCC 1:5:10 type E2 (40 mm graded aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in leveling& sub base course in floor and mass concrete, complete all as specified and directed.
M&L broken stone or boulder hardcore of gauge n exc. 63mm, deposited, spread and leveled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L screed bed or bedding layers of cement mortor (1:6),15mm thick for laying of floor tiles, complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed.
M&L rendering of cement mortor(1:4), 10mm thick on brick work on concrete surface for laying of tiles, complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surface 300mmx 200mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6 type C2 (40 mm graded stone aggt)as in plinth protection/foot path etc. finished even and smooth without using extra cement, complete all as specified and directed.
S&F vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor, complete all as specified and directed.
M&L for cement concrete type E2 (1:5:10) using 40mm graded aggregate as in sunken portion of toilets, complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 with water proofing compound 2% by wt of cement, finished even and smooth withot using extra cement in sunken portion, complete all as specified and directed. Note:- WPC shall be measured and paid separately
Supply only integral water proofing compound.
M&L applying evenly a tack coat of industiral bitumen 85/25 at the rate of 1.20 Kg/Sqm including cleaning of surfaces over newly plastered surfaces of sunken portion, complete all as specified and directed.
S&F PVC low level flushing cistern 10 ltrs capacity, white symphonic action with ball valve, float and handle including flush pipe and brackets, complete all as specified and directed.
S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/Sqcm, complete all as specified and directed.
S&F Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc, complete all as directed and specified.
S&F designer mirror size 450mmx600mm of make Parryware with border matching, any design or as approved by Engineer - in -Charge.
S&F wash basin vitreous china white flat black size 550x400mm including brackets complete and waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms)
S&F PVC waste pipe 750mm long with cap of 32mm bore dia waste coupling, complete all as specified and directed.
S&F PVC connection 450mm long with two brass coupline.Pipe of 15mm dia of pressure rating 6Kgs/cm2, complete all as specified and directed.
S&F grating doom 100mm dia PT MT weight 25gms, complete all as specified and directed.
S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F steel water tubes, 20 mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.
S&F steel water tubes, 15mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors.
S&F steel water tubes, 25mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.
S&F CONCEALED TYPE stop valve 15mm bore, fancy type cast copper alloy chromium plated , screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F 15mm dia stop/angle valve, cast copper alloy screwed down high pressure with capstan or butter fly handle, screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed.
S&F 15mm bore pillar taps chromium plated cast copper alloy fancy type with screwed shanks and fixed, complete all as specified and as directed.
S&F 15mm dia bib taps,cast copper alloy with crutch or butter fly and screwed for iron pipe or for brass ferrule and fixed.
S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position with all fittings incl 20mm PVC ball valve and including dismantling existing water tank all as specified in SSR Pt-I
S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I
S&F for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc, comlete all as specified and directed.
M&L for 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4), complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F PVC (SWR) Gully trap 125/100 mm setting and jionting with solvent cement, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed , in any length with rubber rings joints, laid in trenches or in floor, complete all as specified and directed.
S&F PVC (SWR) 110mm WC connector with lip ring, complete all as specified and directed.
S&F PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
S & F PVC (SWR) 110mm dia mtr bends any radius, complete all as specified and directed.
M&L bed to drain pipe including packing concrete under and hunching against the sides of pipes after they are laid and tested in PCC 1:4:8 type D-2, complete all as specified and directed.
M&L Half Brick thick wall with sub class 'B' bricks straight or curved on plan to any radious built in CM 1:4, complete all as specified and directed.
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in drains/surface channel, benching, coping Kerbs etc., complete all as specified and directed.
M&L RCC Type A-1 1:1/2:3 (20mm graded aggregate) nominal mix over slabs surrported on walls, beams and columns in floor, roofs, landing, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
Formwork to edges of concrete flats, concrete railings, floor and roofs slab n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed.
M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking and bending etc and binding with MS wire (annelaed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L Mild steel TMT bar bars 6 to 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders incl. crancking,bending, placing & binding with MS wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc.. including raking out joints, hackinng for key , scrubbinng down with water , etc, complete all as specified and directed.
M&L preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer, complete all as specified and directed.
M&L preparation of new plastered wall surface applying two coat of "Birla White wall care putty"or" JK Wall Care Putty "to make the entire surface free from undulations, complete all as specified and directed.
S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.
S&F mild steel work as in Nibs, hooks etc for fencing post and the like made from 6mm dia round bars conforming to Gde-Fe 310-0, complete all as specified and directed.
S&F mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 5 to 10 mm dia and n. exc. 5 cm long, complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mangeryas shown on drgs (iii) Guard bars glazing & wire mesh shall be measured & paid for separately, complete all as specified and directed
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality glazing with oil putty of make Shalimar Hardware or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane, complete all as specified and directed.
S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.
Demolition of brick work built in CM incl all quoins arches, pillars etc including removing the same where directed, complete all as specified & directed .
Dismantling floor , hearth or wall tiling includiing cement mortar bedding , removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L Vitrified light shade tiles 10 mm thick (Square/rectangular) polished area of each tiles n.exc 0.36 Sqm in floor/dado over and including 15 mm thick screed bed in CM 1:4
Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m, complete all as specified and directed.
Refixing in chowkhats or frames exc 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) in other opening, complete all as specified and directed.
M&L anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.including (powder coating 50 Micron), complete all as specified and directed.
M&L anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.including (powder coating not less than 50 micron), complete all as specified and directed.
M&L 5.mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.
M&L reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in Chullah-hoods, chajjas, manhole covers, and kitchen shelves etc, set in cement mortar 1:6, complete all as specified & directed.
Cutting chases ,pinning in, brick work girth exc 10cm but n.exc. 20 cm and making good to facings where required and pointing to ends of edges of landing, sun shades, chajjas, shelves etc in cement mortar 1:3, complete all as specified & directed.
M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor, complete all as specified and directed.
M & L Sand filling under floors including watering and consolidation, complete all as specified and directed.
M&L 60 mm thick coloured reflective type interlocking PCC paver blocks consisting of red and yellow colour in approved design and colour set and bedded over and incl 50mm thick coarse sand laid over sub base, complete all as specified and directed.
All as per as item No 96 above but except tiles.
M&L chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed in floors & pointed in neat cement slurry with grey cement and pigment in floors incl 15 mm thick screed bedding layer in CM 1:6, complete all as specified and directed.
M&L one coat of White Wash on old ceiling surfaces including preparation of old wall surfaces, complete all as specified and directed.
M&L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty, complete all as directed
Demoiltion of cement concrete in ground floor and paving not exc 15 cm thick, (below or above ground level)
Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to better, complete all as specified and directed.
Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces, complete all as specified and directed.
M&L form work to sides and soffits of beams lintels etc finished rough, complete all as specified and directed.
M&L RCC 1:2:4 Tybe B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass, complete all as specified and directed.
M&L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in Columns, pillars etc, complete all as specified and directed.
M&L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc, complete all as specified and directed.
S&F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design, including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-0, complete all as specified & directed.
M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour, complete all as specified and directed.
M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement, complete all as specified and directed.
M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and directed.
S&F Plastic water closet seat cover white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
All as per Item No 85 above but as in Skirting with 10mm thick rendering in CM 1:3, complete all as specified and directed.
Taking up or down 20mm steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down 15mm steel tubing and connections including cleeaning for refixing or removal to store complete all as directed.
S&F stop valve/angle cock fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions, complete all as specified and directed.
S&F 18/19mm thick pre-laminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc incl wooden beads at edges, complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc, complete all as specified and directed.
S&F CP towel rail, 20mm dia, D type,60cm long, complete all as specified and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished polished, complete all as specified and directed.
S&F Soap dish, vitreous China white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screws, complete all as specified and directed.
PVC (SWR) junction single, (Single T) 110 mm dia bore equal or unequal.
S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6Kgf/Sqcm, complete all as specified and directed.
S&F PVC (SWR) 75mm dia bend ofny radius.
M&L rendering 10mm thick in CM 1:3 on fair faces of concrete finished even and fair in ceilings, complete all as specified and directed.
M&L for 1 coat of White Wash on old ceiling surfaces including preparation of old wall surfaces, complete all as specified and directed.
Taking down existing chowkats or frames, without taking out shutters ,from the frame , n exc 1.5 Sqm, complete all as specified and directed.
S&F factory made solid PVC door frame of size 48 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification and drawing and as directed (Rajshree brand or equivalent)
S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing and as directed (Rajshree brand or equivalent)
M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of pigment, complete all as specified and directed.
M&L 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type fixed with nails to timber frame work as in cupboard shelves, kitchen, cupboards etc as in repair, complete all as specified and directed.
S&F magnet ball catcher for cup board shutters, complete all as specified and directed.
S&F 75mm size Brass polished fency type handle for cabinet shutter, complete all as specified and directed.
S&F in repairs sink with draining board made of stainless steel 1.00mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm, complete all as specified and directed.
M&L 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor, complete all as specified & directed.
M&L preparation of old painted surfaces and applying one coat of cement based paint on walls of any colour, complete all as specified and directed.
M&L preparation of old wood and wood based surfaces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint of any tint, complete all as specified and directed.
M&L for painting steel and iron surfaces over 10cms width or girth not otherwise described with one coat of synthetic enamel paint incl preparation of old painted surfaces, complete all as specified and directed.
Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads, complete all as specified and directed.
S&F Plate Rack made out of 0.80 mm thick stainless steel of size size 90cmx75cmx25cm with all internal fittings (as per sample), complete all as specified and directed.
S&F 25mm dia vista pattern metalic fancy type curtain rod incl. brackets and fancy type end knobs rings etc, complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically, complete all as specified and directed.
M&L RCC 1:2:4 Type B-1 using 20 mm graded stone aggregate as in slab supported on walls, beams etc and shelves and the like, complete all as specified and directed.
M&L post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 to match existing floors, complete all as specified and directed.
M&L post construction anti-termite treatments at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.
M&L post construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear metre incl drilling and plugging holes etc. in apron, complete all as specified and directed.
S&F in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes, complete all as specified and directed.
S&F in repairs brass chromium plated Central hole basin mixer for mixing hot and cold water screwed for iron pipe suitable for 15 mm bore pipes including pvc connection etc complete all as specified & directed.
S&F CP brass jet spray with hand hold arrangement incl. 1.5m long flexible pipe with hook of superior quality, complete all as specified and directed.
S&F CP jet health fauset fixed in WC seats, complete all as specified and directed.
S&F toilet paper holder of CP Brass, complete all as specified and directed.
S&F 125mm CP grating with waste hole fixed in position, complete all as specified and directed.
S&F in repair PVC cabinet 60cmx45cm with shelves etc, complete all as specified and directed.
M&L pre-cast cement concrete as in cover slabs (for manholes etc., RCC 1:2:4, type B-1 (20mm graded aggregate) set in cement mortar 1:6, complete all as specified and directed.
M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, complete all as specified and directed.
All as per item No 158 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmmwire with 1.5sqmm earth wire.
All as per item No 158 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm, complete all as specified and directed.
S&F switch piano flush type/Bell push, 5 Amps, single pole one way, complete all as specified and directed. Make : Anchor/Havells/ABB ( ISI marked)
S&F socket 5 pins, 6 Amp, flush type piano (multi purpose) , complete all as specified and directed. Make : Anchor/Havells/ABB ( ISI Marked)
S&F Socket 15 Amps flush type 230 Volts , AC, complete all as specified and directed. Make : Anchor/Havells/Indoasian ( ISI marked)
S&F switch 15 Amps flush type 230 Volts , AC, complete all as specified and directed. Make : Anchor/Havells/ABB ( ISI marked)
S&F ceiling rose, surface backlite, 65x50mm, three terminals, complete all as specified and directed. Make : Anchor ISI marked.(Make : Anchor/Havells/ABB( ISI marked)
S&F angle lamp holder PVC/Polycarbonate base / back suitable for with LED bulb 10 W, complete all as specified and directed. Make : Anchor/Havells/ABB ( ISI marked)
S&F lED bulkhead 10W with IP 65 protection 240V, complete all as specified and directed. Make- Bajaj Havells /BAJAJ/Phillips
S&F LED Mirror Light 10 Watt with diffuser, Decorative type, complete all as specified and directed. Make :-Crompton or equivalent in Phillips/ Havells/Bajaj
S&F 20W LED 6000K (4’) wall mounted LED batten with 110 lum /watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed. Make : Havells/ bajaj/ Crompton
Supply & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specified and directed. Make- Grandlay/Havells/Finolex
S&F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 04 ways, complete all as specified and directed. Make:-Indoasian/Havells / Legrand / L&T .
S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc, complete all as specified and directed. Make:-Indoasian/Havells / Legrand / L&T .
S&F MCB SP 06 to 40 Amps 415V incl all termnials, fitting etc, complete all as specified and directed. Make:-Indoasian/Havells / Legrand / L&T .
M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.
S&F GI Tubing medium grade ISI marked including all fittings laid in trenches/fixed on wall of size 25mm bore, complete all as specified and directed.
Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 m in depth for laying under ground cables/erection of pole and getting out in hard/dense soil, complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified.
Removal of excavated surplus material (Soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point, complete all as specified and directed.
Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trences, complete all as specified and directed.
S&F for old size brick well burnt, laid flat, for cable protection, complete all specified and directed.
S&F heavy duty exaust fan metal body 350mm sweep, complete all as specified and directed. Make- Havells/Bajaj/Crompton
Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface, complete all as specified and directed.
M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, complete all as specified and directed including back plate and cover plate on modular switch socket of any type & module.
All as per item No 183 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmmwire with 1.5sqmm earth wire, complete all as specified and directed.
S&F switch modular type (ISI marked confirming to IS 3854:1997)), single pole, one way 10 Amp , 240 Volts, complete all as specified & directed. Make- Havells/Anchor/Legrand
S&F switch modular type (ISI marked confirming to IS 3854:1997)), single pole, one way 15/16 Amp 240 Volts complete all as specified & directed. Make- Havells/Anchor/Legrand
S&F socket modular type (ISI marked) confirming to IS 1293:2005, single pole, 6 Amps 2 pin/ 3 pin, 240 Volts, complete all as specified & directed. Make- Havells/Anchor/Legrand
S&F fan regulator 5 step modular type (ISI marked) confirming to IS 1293:2005, single pole, 6 Amps 2 pin/ 3 pin, 240 Volts, complete all as specified & directed. Make- Havells/Anchor/Legrand
S&F socket modular type (ISI marked) confirming to IS 1293:2005, single pole, 6/16 Amps twin 3 pin power socket ,240 Volts, complete all as specified & directed. Make- Havells/Anchor/Legrand
S&F 5 step fan regulator modular type (ISI marked confirming to IS 3854:1997)), single pole, 240 Volts, complete all as specified & directed. Make Havells/Anchor/ Legrand
S&F Bell push modular type (ISI marked confirming to IS 3854:1997)), single pole, 5/6 Amp , 240 Volts, complete all as specified & directed. Make- Havells/Anchor/Legrand
S&F Ding Dong door bell, complete all as specified and directed. Make : Anchor/Havells/Legrand (ISI marked)
S&F in replacement round shaped recess mounted LED litht 15W celling outlet 2high efficiency downlight with 100 lm/W with IP44 rating. Make :- Havells/Anchor/Bajaj
Dismantling and taking down existing unserviceable submain wiring from batten/conduit of any size and making good to disturbed surfaces to match the existing surfaces, complete all as specified and directed.
M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty in concealed conduit including taking down old wiring all accessories, complete all as specified and directed. Make- Havells/Finolex
Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing, complete all as specified and directed.
S&F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 10 ways, complete all as specified and directed. Make:-Havells / Legrand / L&T .
S&F bed side lamp 3Watt including fixture LED 3 Watt warm white size 14X14X37, complete all as specified and directed. Make Phillips/ Jaguar/Bajaj
Taking down/out unserviceable UG cables of any cross sectional area and connections including Bricks, GI Pipes, etc of any descriptions, laid in trenches and/or fixing with walls/poles including segregating of serviceable materials viz Bricks, cables, GI Pipes etc, complete all as specefied and as directed.
S&F or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 06 sqmm 2 core including Brass compression cable gland, terminal lug etc and testing, complete all as specefied and as directed
S&F in repairs thermo plastic cable Junction box of size suitable for Cable IP 65 Protection with metric knockout for cable entry incl MS clamp of size 25x3mm, with aluminium bus bar 200 Amps Single pole and neutral and MCB SP 16 Amps incl 3 nos HDPE gland fixed on pole with clamp nuts,bolts etc, complete all as specified and directed. Make:Sintex/ Hensal/HPL
S&F LED Post top / Gate light 1x40 watt decorative type, 360° indirect light including fixing with suitable size GI pipe as requir on the top of gate pillor, control by two way SP DB with Suitable MCBs as per direction and wiring complete, direction by engr-in-charge , complete all as specified and directed. Make : avells/Crompton/Bajaj)
S&F Garden Light/ Bollards 10W watt are made of extruded Aluminium, profiles with cast aluminium base,opal PC diffusers with integrated LED and driver, complete all as specified and directed. Make : Havells/Crompton/Bajaj
S&F LED Flood ligh 60 W with IP 66 protection flood light pole, complete all as specified and directed. Make : Havells/Crompton/Bajaj
Taking down old unserviceable and Supply and fixing connecting and testing (in replacement) time switch panel box size 400mm x 350mm x170 mm dust and vermin proof made of 16 gauge MS sheet factory made duly painted with two coats of synthetic enamel paint recommended colour over a coat of red oxide primer and mounted inside the following .Note:- Time switch pannel box shall be fixed on one pole/wall in feeder pillar box with flat iron clamp 40x6 mm or other suitable fixing arrangement, complete all as specified and directed. (a) MCB triple pole 32 Amps 230 volt-01 No (b) Analog electro mechanical time switch 24 hours with minimum setting 30 minutes for daily working contact rating 16 Amps,240 volts,AC with initial charging battery backup having supply and reserve failure upto 150 Amp hours and coil voltage 415 volts (Make:-Indoasian/L&T/Havells) (c) AC contactor ,3 pole,ML-2,415 Volts,50 Hz (d) intenal wiring with pvc insulated stranded copper conductor of suitable size and making electric connection -01 No. (e) By pass MCB single pole ,32/40 Amps,230 volts-01 No. Note:- Time switch pannel box shall be fixed on one pole/wall in feeder pillar box with flat iron clamp 40x6 mm or other suitable fixing arrangement complete all as specified and directed by Engr-in-Charge.
S&F LED Batten 20W With Body made of Extruded Aluminium Alloy housing and with Extruded Polycarbonate diffuser for optimum and Wide light distribution. Ingress Protection of Min IP 40 with Driver having inbuilt Protection against Short Circuit Miswiring, Over Voltage and Surge Protection of upto 6kV. THD < 5 %, CRI>80. PF>.95.System Efficacy of the Product should be >130lpw( Total System Lumens > 2600 lm). The Colour of the fixture should be in Grey finish. The Fixture and Driver should be of the same Brand only.Operating Voltage Between ( 140-270)V. The Avg Life of Product Should be 50,000 Burning Hours @L70. The Fixture and Driver should be BIS Approved. The Engineer in Charge can take any Random Sample from Lot and send it for testing from any Govt Approved NABL Lab . The Cost of the same have to be borne by the Contractor. In case the sample is rejected the Whole lot will be rejected by the Department. Contractor will avail warrenty of 2 years. Make-(Havells/Crompton/Bajaj)
Supply and install high wall split units indoor/ outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary of capacity 1.5 Ton with minimum 5 star rating and EER 3.2, complete all as specified and directed.
Supply and Installation of room window type inverter AC electric driven (single phase) cooling capacity 4500 K Cal per hour (1.5 Ton) BEE 5 Star rated, complete all as specified and directed. Make : Voltas/Blue Star/LG/Samsung
Supply and draw submain wiring with two runs of single core 4 sqmm FRLS PVC insulated copper cable 1100 Volts grade multi stranded unsheathed copper conductor in PVC casing and caping including 1x4 sqmm multi stranded FRLS PVC, complete all as specified and directed. Make: Finolex/Anchor/Havells
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20-32 A, complete all as specified and directed. Make: Finolex/Anchor/Havells
S&F MCB SP 5 to 32 A in existing DB all as specified and directed by Engr in Charge. Make: Finolex/Anchor/Havells
Supply, installation, commissioning of metal Top Deep Freezer single phase 240 volt, 50 Hz of capacity 320 L, complete all as specified and directed. Make : Voltas/Blue Star/Godrej/LG/Samsung
Supply, installation, commissioning of water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80L, complete all as specified and directed.
S&F refrigerator , electric driven (single phase) capacity 300 L BEE 5 Star rated with in built inverter technology, complete all as specified and directed. NOTE: All the above items should be of Make: Voltas/ Blue Star/ Godrej/ LG/ Samsung with 2 years complete warranty.
ashiyana electrical company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .