Silver plated copper lug pin type

Special Eligibility Criteria

1. 1

   [A] This item is reserved to be procured from CLW approved sources only. [CLW UVAM item ID : 2101004 and Sub Item ID : 2101004001 as available on UVAM]. (a) Purchaser reserves the right to procure Bulk/regular/entire quantity from approved vendors/sources of nominated vendor/source approving agencies for the tendered item (as available on UVAM only). (b) (i) Offers received from tenderers appearing in the Vendor list of nominated vendor/source approving agencies for tendered item (as available on UVAM only) as 'Vendors for Developmental Orders' shall be considered eligible for Developmental Orders up to 20 percent of net procurable quantity (NPQ). (ii) 'Developmental Vendors' are only such vendors which are listed as developmental vendors on UVAM without any condition. (Authority- Railway Board's letter no. 2021/RS(G)/779/7 dt. 09.05.2025). (c) Where there are not more than three Indian suppliers categorized as Approved Vendor for a particular item, developmental vendors can be considered for placement of bulk order without any quantity restrictions. However, while considering such vendors, factors including past performance, capacity, delivery requirements, quantity under procurement, nature of item, outstanding order load etc. shall be considered in a transparent manner, subject to rates being reasonable. In such cases, the purchaser reserves the right to split the order quantity between one or more firms and Para 25.2 of Instruction to tenderers and General Conditions of tenders for supply contract [for indigenous tenders] shall be applicable. Such orders shall be treated as bulk orders. Indian Supplier shall be defined as follows: A supplier or bidder shall be considered to be from India if (i) the entity is incorporated in India, or ii) a majority of its shareholding or effective control of the entity is exercised from India, or iii) more than 50% of the value of the item being supplied has been added in India. (d) The status of the vendor (i.e. approved or developmental vendor) shall be reckoned as on the date of tender opening and not thereafter. However, cases of downgrading/removal/ suspension/ banning etc., after opening of tender, shall be taken into account while considering the offers. (e) The firms/tenderers who are not appearing in UVAM as Approved/Developmental Vendors of nominated vendor/source approving agencies will not be considered for ordering. However, such firms willing to participate, are advised to approach the concerned Vendor Approving agency for getting their name registered as approved/developmental vendor in the vendor directory maintained in UVAM.

   Document requiredConfirmation required

Check List

1. 1

   Have you attached any performance statements with your offer ?
2. 2

   Have you quoted price on the basis of free delivery to destination, indicating the break up ?
3. 3

   Have you quoted delivery period correctly and precisely ?
4. 4

   Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers ?
5. 5

   Have you submitted the Bankers report ?
6. 6

   Have you furnished the details of equipment-quality control ?
7. 7

   Have you furnished the statement of deviations [preferably nil] ?
8. 8

   Have you submitted your GST Jurisdictional Assessing officer details with your offer ?
9. 9

   Have you submitted self certification for the local content requirement for Class-I Local Supplier / Class- II Supplier as the case may be

Commercial-Compliance

1. 1

   In case the successful tenderer is not liable to be registered under GST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned tax authority.

   Document optionalConfirmation required
2. 2

   Condition for GST - All the bidders / Tenderers should ensure that they are GST compliant and their quoted tax structure / rates are per GST Law.

   Document optionalConfirmation required
3. 3

   GST Condition regarding HSN number of tendered item- [i] It shall be responsibility of the bidders to quote correct HSN number and corresponding GST rate. [ii] The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting the offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [iii] Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder. [iv] Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that Incorporated in the purchase order; payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed. [v] Vendor is informed that she / he would be required to adjust her / his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchases order. [vi] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and Statutory Amendments in the quoted GST rate and HSN number, under SVC.

   Confirmation required
4. 4

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous item. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optionalConfirmation required
5. 5

   Firm should mention make/model no. of the offered item along with its detailed technical parameter.

   Document optionalConfirmation required
6. 6

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of offer: Minimum 90 days. No deviation from the offer validity period stipulated in the tender is permitted.

2. 2

   Bidders are reminded to carefully go through Para 35.0 of "Instructions to Tenderers and General Conditions of Tenders for Supply Contract 25" (included and uploaded along with the bid document) those pertaining to "Code of Integrity, Misdemeanor and Penal measures". If two or more bidders are found to be sister concerns or affiliates (having common partner/director/promoter/owner/holding company decision control etc.) the offers of all such sister concerns are liable to be rejected as per relevant provisions of Tender conditions. They are therefore earnestly urged to refrain from committing violation of code of integrity in general and conflict of interest and anti-competitive practices.

3. 3

   As a tenderer, we hereby confirm that we have gone through tender condition no. 35 of "Instructions to Tendereres and General Conditions of Tenders for Supply Contract 25" and do hereby confirm that none of our sister concerns or affiliates (having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender.