Improvement up-gradation to the Electric System in the Biochemistry and Micro-Biology Laboratories of Govt. Medical College Doda. (2nd Floor).

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire

2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 x 6 Sq.mm + 2 x 6 Sq.mm earth wire

4 x 16 Sq.mm + 2 x 6 Sq.mm earth wire

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 10/16/32 amp.

Triple pole and neutral 32 Amp.

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Telephone Socket Outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C"curve including connections, painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutralbus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp.).

SPN 40 Amp

SPN 63 Amp

TPN 40 Amp

Supplying and fixing of 1.1 KV grade Aluminium cable 3.5 core armoured of following size including connections etc as required.

120 Sq.mm 3.5 Core Armored

Fabrication, supplying, installation testing and commissioning of following pannel CPRI approved made out of 2mm thick M.S. sheet, floor/wall mounted, vermin and dust proof, indoor/outdoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly powder coated with provision of space for fixing of MCCB, C.O.S, MCB's, MCB strips, aluminum Bus Bars etc as required.

Supplying and fixing MCCB in cubical panel board. Providing and fixing following rating and breaking capacity MCCB FP in existing cubical panel board including drilling of holes in cubical panel and making connections etc. as required (Make as per annexure enclosed).

MCB- SPN- 63 AMP- 10 KA

Triple pole & netural 63Amp

MCCB- 100 Amp- 30 KA- FP

MCCB- 250 Amp- 36 KA- FP

Aluminium Bus Bar suitable for 400 Amp. 4 Strips.

Change Over Switch 100 A FP MCCB Type

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover. including 25 x 5mm strip upto the building and GI wire from the building upto the wall mounted panel.

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover. including 25 x 5mm strip. upto the building and from the building upto the wall mounted panel.

Supplying and fixing of fixtures/fittings.

600mm x 600 mm LED Panel light recessed type.

Supplying and fixing 20/22 watt LED 4 feet tube light fitting/fixture CRCA housing with 2000 Lumens and min lumens efficiency 100 Lumens/watt P.F 70.95 THD < 16% & voltage input range 140-270 V with Shot circuit & overloading protection circuit off .

Supplying and fixing of Angle/Baten Holder with 9 watt LED Lamp polycarbonate including making complete connnections etc as required. (Make as per annexure enclosed).

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required.

Ceiling fan 1200 mm sweep alongwith rod up-to 1'-6" long fan rod. Prefered make as per list of approved make.

Exhaust fan 300 mm size Prefered make as per list of approved make.

Exhaust fan 375 mm size (Heavy Duty) Prefered make as per list of approved make.

Wall fan 400 mm size Prefered make as per list of approved make.

Supplying & fixing of (90 + 5) watt LED type Street Light fitting complete with suitable size G.I Pipe bracket duly embedded/fixed in wall/along parapet including complete connections. etc as required.

Jabeena Begum

M/S UNIQUE ENGINEERS AND SUPPLIERS