Construction of RW Section-I Bisoi for the year 2025-26

Earth work in excavation of foundation trenches in hard soil including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring & Shuttering if required etc.complete as directed by

Supplying, filling in foundation and plinth with sand including watering ramming, cost, conveyance, royalties and all taxes of materials and cost of labour with T&P required for the work etc. complete as directed by the Engineer-in-charge

Cement concrete(1:3:6) in foundation and plinth below the base course of flooring using 4cm size black hard hand broken granite stone metals of approved quality from approved quarry including lowering laying concrete watering and curing etc.complete to r

Brick masonary in cement mortar (1:6) using Flyash Bricks of size 10"x5"x3" having crushing strength not lessthan 75 Kg/Cm2 in Foundation and Plinth after immersing the bricks for six hours in water before use in all floors with all necessary projection,

Brick masonary in cement mortar (1:6) using Flyash Bricks of size 10" x 5" x 3" having crushing strength not lessthan 75 Kg/Cm2 in super structure after immersing the bricks for six hours in water before use in superstructure in all florrs with all neces

Cement concrete of proportion (1:2:4) with 12mm (1/2") size hard granite crusher broken chips including watering curing, cost, conveyance, royalties and all taxes of all materials labour with T&P required for the work etc.complete as per direction of Engi

R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering, and curing for four weeks finishing the exposed surface and ceiling smooth, providing grooves or beads where necessary including cost, conveyance royalties and taxes of all materials and labour with T&P required for the work etc. complete in all respect but excluding the cost of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. rods or tor steel and binding wires and tying the grills and placing in proper position in all floors.as per the specification and direction of the EIC. Column Base

Column

Grade Beam

Wall Beam

Lintel

Roof Slab

Chhajja

Straightening, bend up or coiled rods cutting, bending, cranking, hooking, welding or jointing (if required) the M.S. rods or tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC

Supplying, fitting and fixing of Vetrified tile of size 60cm x 60cm in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of Vitrified tile (In dados / skirting) of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge.

Supplying, fitting & fixing of Chequred Tiles approved make in floors, treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rub

Dressed seasoned Sal wood work framed and fixed (wrought & put up) in trusses, purlins, frames of doors, windows, ventilators and beams.

Providing, fitting and fixing of Flush door made out of 32 mm thick block board including cost of all fittings and including cost, conveyance, royalty and taxes of all materials, hire charges of drilling machine and cost of all labour T&P required for the work complete in all respect as per direction of the Engineer in Charge.

Supplying, fitting, fixing up window (sliding type) made up aluminium section 151-154, 151-155, as windows frame section No.151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials all taxes labour, T&P etc. complete as per direction of the Engineer-in-charge.

Supplying fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm Plain glass in top portion with 12mm thick pre - laminated board in bottom portion fixed on door frame by means of tapered clip no 4660 and the frame to be completeed by means of jointing angle no 1855 including all cost of labour, T&P hire charges of drilling machine, Labour charges etc. complete.

Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C.

16mm thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T

12mm thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing with cost, conveyance taxes and royalties of all materials and cost of all labour with T&P requred for the work complete as per the direction of Engineer in Charge.

Painting two coats in all floors to new wood and iron work over a coat of primer including sand papering,polishing the surface,including cost conveyance taxes of all materials,cost of all labour, T&P required for the work including cost of paint & primer etc complete as per the direction of Engineer in Charge.

Priming one coat with any approved primer including cost of primer (NEROLAC/ASIAN/BERGER/DULOX) or equivalent to make including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-Charge.

Distempering two coats of approved shade including cost conveyance taxes of distemper and cost of all labour with T&P required for the work etc.complete as per direction of Engineer in charge.

Wall painting two coats with any approved quality of Weather seal coat to give an even shade including cost of all materials,labour, T&p required for the work complete.

Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. etc

Supplying and laying of precast inter locking concrete block of 80mm thck of approved design and filling the joints with sand on the prepared surface including cost of all charges etc. complete as per MORD specification.