Loading…
Loading…
Tender Value
₹10.8 L
EMD Value
₹21,580
Closing Date
2 Jul 2026, 5:00 pm6d left
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer Provincial Division Chandigarh
Room No. 315-16 Third Floor, 17 Bays Building, Sector 17, Chandigarh
REPAIR/RENOVATION OF SEMINAR HALL, ROOM NO. 123-124 IN MAHATMA GANDHI STATE INSTITUTE OF PUBLIC ADMINISTRATION, SECTOR-26, CHANDIGARH
2026_CEPW_170644_1
27 Dated 22.06.2026
Open Tender
Civil Works
90 days
Sector 26, Chandigarh
Please refer Tender Documents
3 documents required · 3 mandatory
₹5,000
₹21,580
Yes
22 Jun 2026
22 Jun 2026
3 Jul 2026
22 Jun 2026
2 Jul 2026
22 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Scraping (a) White wash and colour wash. (CSR 8.31) (a) | 64.15 | Sqm | 7.37 | ₹472.79 |
| 2 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. (CSR 13.65) | 63.2 | Sqm | 1,391.67 | ₹87,953.54 |
| 3 | Providing and fixing mineral fibre false ceiling tiles at height upto 4 mtr With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.. (CSR 13.64) | 89.96 | Sqm | 1,955.3 | ₹1,75,898.79 |
| 4 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. (CSR 16.65) | 127.35 | Sqm | 84.28 | ₹10,733.06 |
| 5 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR 16.63) | 191.5 | Sqm | 93.76 | ₹17,955.04 |
| 6 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.(CSR 16.18) | 38.3 | Sqm | 67.42 | ₹2,582.19 |
| 7 | providing and fixing of 4mm thick teak ply veneer (greenply/centuryply), finished with polish on existing wooden work as per design selected complete in all respect | 147 | Sft | 164 | ₹24,108 |
| 8 | Providing and fixing of wall panelling with 25 mm commercial plywood with 4 mm thich teak ply veneer, finished with melamine polish as per design selected complete in all respect. (Make greenply/merino/century) | 630.75 | Sft | 363 | ₹2,28,962.25 |
| 9 | Providing and fixing of partition full/low height, partly glazed & solid partition consisting of partal soft wood frame work consisting of 3"x2" partal wood, except skirting members which shall have 2x75x50mm members at required spacing of 2' c/c but not exceeding 3' in either direction or as/ site condition, finished with 4mm thick teak veneer over 6mm BWP ply on both sides complete with 15mmx20mm thick with good quality wood beading inclusive of P/F 5mm etched glass (as per approved design) in all partition complete. The rate shsall inclusive of providing and giving neat finish inclusive of polishing on all exposed wood surfaces. Also note that the ply/ laminates fixed ot the wooden frame shall have grooves of 8mm x 8mm at 400 spacing verticaly/ horizentaly as per given design. (N.S) | 72.75 | Sft | 647 | ₹47,069.25 |
| 10 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.(CSR 11.8) (i) | 0.81 | Cum | 5,526.66 | ₹4,476.59 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.68 MB
SBD.pdf
Tender Documents • 10.19 MB
BOQ_347342.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid