Loading
Loading…
Loading…
Tender Value
₹27.2 L
EMD Value
₹54,400
Closing Date
29 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
40 conditions · 6 needing a document upload
Valid copy of PAN and GSTIN needs to be furnished along with the documents.
Tender Form (First Sheet) as per 'Annexure-I'
For Sole Proprietorship firm a)Affidavit as per 'Proforma I'. b)Special power of Attorney as per proforma given in 'Proforma - II' to be submitted by sole proprietor firm duly notarized.(Not required if tender documents are submitted by proprietor himself) (Mandatory)
For Partnership firm a)Self/Notary attested copies of Partnership deed. b)Special Power of Attorney as per proforma given in 'Proforma-III' to be submitted by Partnership firm. (Not required if one or more partners are authorized in Parternership deed to sign on behalf of the firm.)
For Limited Company a) Copy of Memorandum & Articles of Association of Company. b)Self /Notary attested copy of resolution passed by Board of Directors authorizing its Director/Employee to deal with tender on behalf of company. c) Attested copy of Notarized Special Power of Attorney including ratification clause duly signed by person authorized by the company.(D) A copy of Certificate of Incorporation
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The total cost is including GST. Hence tenderer are advised to quote the tender inclusive of GST.
All the dismantled material should be handed over to E.I.C. at site with proper challan.
All materials which will be utilized for this work shall confirm to relevant IS specifications.
The contractor(s) have to supply all petty stores, which may be required for successful commissioning of the equipment's, but not mentioned in the schedule of works. The rate quoted against each item shall be inclusive of those petty stores.
The Contractor shall execute the work to entire satisfaction of the site Engineer, SR DEE/RNY(G) or his representative.
Successful Tenderer shall produce & hand over test and Guarantee certificate issued by manufacturer of all the equipment/ Component at the time of supply to Railways, failing which bill of the work will not be passed.
Wiring wire/Cable Make should be of Polycab/Richa/Havell's/Kolors.
Switch, socket, power unit, ceiling rose, holder, concealed box etc make should be of Kolor(Kany Kom)/Anchor/Havell's/C&S//Anchor.
Ceiling/Wall fan Make should be of Crompton/Orient/Usha/Bajaj.
MCB,MCCB, RCCB, DB Make should be of C&S/ABB/Geco/Legrand/Havell's.
PVC conduit Pipe should be of Berelia/Richa/Polyplast/Supreme.
PVC switch board should be of Presto plast/Richa/Polyplast/Supreme.
GI Pipe make should be of Jindal/Bansal/TATA.
Battery Charger should be of Make:-Ruttonsha international rectifier Ltd/ Integ/Signatron.
Colour coding should be used in all wiring. For Positive- Red, Negative - Black & Earth - green.
PVC cable tray sholud be of salzer or similar make
HDPE pipe should be of North East Communication/Swastik/Berelia/AJA Plus.
Pre cooling socket make should be Make-Hensel or similiar model of Rittal/Gewis.
The drawing of panel board should be approved by the competent authority before fabrication and commissioning.
Payment Clause:Payment 70/80% of the payment shall be made to the contractor/firm against the supply of material of the work.
Successful contractor must follow guidelines as per extant rules of IR-Shramik Kalyan Portal.
Penalty :- In case of any damage causes to railway materials at the time execution of work, penalty will be imposed as per railway norms otherwise the same should be rectified as per original.
The LED fittings make should be of Crompton/Havell's/Bajaj/Kolors/Jaquar.
No work can be carried out without availability of site supervisor. if site supervisor is not available , then work will be stopped and penalty will be imposed.
All staff at site should wear all safety gears and follow all safety precaution to avoid any untoward incident .If staff is found without proper safety gear, then work will be stopped and penalty will be imposed as per GCC.
If staff as per message of SSE/Office is not provided by Agency, then penalty will be imposed for delay in work on Agency
At RPAN- Electrical works in connection with construction of covered shed for 140T crane of ART with dock pit and service building.
RNY-EL-T-03-2026-27
RNY-EL-T-03-2026-27
Open
Works - General
180 Days
Kamrup, Assam
₹0
₹54,400
29 Jul 2026
3 Jul 2026
15 Jul 2026
61 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 27,21,443.24 | ||
| — | 35.00 | — | — | ||
| Supply,testing and fixing of IP 66 high power LED flood light luminaries 120 watt LED with pressure die-cast aluminuium housing, complete with all accessories as per direction of EIC at site. Lumens output should be of 120 Lumens/watt,LED should be as perLM-80/IS: 16105.LED driver's efficiency should be minimum 90%,Power factor of complete fitting should be greater than 0.90, Input operating voltage:140V to 277V AC and driver should be as per IEC:62384/IS:16104. The LED fittings should be warranted for 5years. | — | — | — | 5,84,856.65 | |
| — | 15.00 | — | — | ||
| Supply, installation, testing & commissioning of 50 watt LED high bay light including all accessories as per direction of EIC at site. | — | — | — | 85,320 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing & commissioning of 25 watt LED street light fittings complete including fixing arm and all accessories as per direction of EIC at site). The LED fittings should be warranted for 5 years. | — | — | — | 15,013.9 | |
| — | 8.00 | — | — | ||
| Supply, fitting, fixing of 36 Watt , LED tunnel light luminaries complete suitable for 110V DC input voltage to be provided.Fixture shall be made from pressure die cast aluminum housing with toughened glass cover, secured properlywith Teflon gasket to ensure IP: 67 & IK10 ANTI-THEFT KEY protections. LEDs shall be of SMD type.Luminaries and ballast shall be of same make. The LED fittings should be warranted for 5 years. | — | — | — | 38,155.92 | |
| — | 200.00 | — | — | ||
| Supply, carrying, laying and commissioning of 6.0 sq.mm of 1100 volt grade PVC insulated & unsheathed, single core, multi stranded FRLS copper conductor cable through cable tray/PVC heavy guage pipe and connection to fan points including flash type 6 A controlling modular switch on concealed unbreakable modular box, cover plate etc as per direction of EIC at site. | — | — | — | 9,416 | |
| — | 10.00 | — | — | ||
| Supply, testing & commissioning of Hi speed air circulating wall mounting 1 single phase fan 450 mm sweep with suitable size GI pipe, MS hook, clamp, nut & bolts arrangements as required as per direction of EIC at site. | — | — | — | 44,582.2 | |
| — | 100.00 | — | — | ||
| Supply ,erection of Hot Dip galvanised 18 SWG,200mm width, 50mm Height cable tray with cover & hardware for fittings as EIC at site. | — | — | — | 72,578 | |
| — | 6.00 | — | — | ||
| Supply, erection testing and commissioning of Emergency Feed Terminal (EFT) as per RDSO Drg No. ELC.DTEXKL3929 to fixed by GI clamps on pole/ for charging with hinges type GI Box in pole by clamped with nut & bolts etc. | — | — | — | 3,109.14 | |
| — | 6.00 | — | — | ||
| Supply and erection of pole /iron trust mounted 400A Emergency feed terminal (EFT) including box with FRP base for welding point as per direction at site Engineer. | — | — | — | 3,109.14 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of AC precooling socket complete with following items labour,screws etc and all accessories. The drawing of panel should be approved by the competent authority before fabrication. Pre-Cooling DB(Wall Mounting),Dimension :-[390 x 950 x 372]mm, Internal Details : -Busbar :-150A Cu (25 x 6 mm CU),125A, FP, 25KA, MCCB - 1no., 125A, 5P, IP67, Plug &Socket - 1 no., Enclosure :RAL 7035, Mounting Structure : RAL 7016, CableSize : I/C 3.5C x 50 Sqmm Cu Cable, Cable Entry : From Bottom | — | — | — | 4,66,079.8 | |
| — | 1.00 | — | — | ||
| Supply. Installation, testing and commissioning of outdoor MS cubical type LT feeder pillar box of suitable size and suitable for 415 V, 50 HzAC supply made out of CRCA sheet not less than 14 SWG. The panel shall be totally enclosed, dust and vermin proof, neoprene gasket of thickness not less than 2 mm shall be used between all adjacent units and beneath all covers so that the joints are effectively dustvermin proof. The busbar chamber shall havethree phase & neutral copper busbar of sameratings. The drawing of panel board should be approved by the competent authority before fabrication and commissioning. The panel shallbe painted with two coats of primer & twocoats of exterior coating by spray painting and shall consists of the following: (i) 125A, 4P, 36kA ,Ics=100%Icu, Adjustable over loadSetting & Short circuit setting, MCCB - 1 Nos. (ii) 63A, 4P, 36kA, Ics=100%Icu, Adjustableover load Setting & Short circuit setting, MCCB- 4 Nos.(iii) 40A, TPN, 'C' Series, MCB - 1 Nos.(iv) Fabrication of Panel board with 14 SWG CRCA sheet including CC foundation and 200A TPN Copper busbar, cable alley, C CFoundation etc and all accessories - 1 job | — | — | — | 69,847.51 | |
| — | 10.00 | — | — | ||
| Supply and erection of 50 mm dia 3 mtr long GI pipe for earthing thickness not less than 3.6 mm including construction of earth pit, RCC earth cover slab 1/2" thick and earth continuity by 25x3mm G I strip, GI nut bolts, earth resistance flag made of MS sheet of size 6'x4' (with black background & white readings on it ) etc as per direction of Engineer - in - charge at site. | — | — | — | 16,864.9 | |
| — | 200.00 | — | — | ||
| Supply and laying of GI pipe 50 mm dia thickness not less than 3.6 mm for cable protection with necessary bends, sockets, etc partly through underground and partly through trench as per direction of EIC at site. | — | — | — | 79,740 | |
| — | 300.00 | — | — | ||
| Supply,laying and fixing of HDPE pipe of outside dia 90 mm, 6 Kgf/cm2 confirming to IS:4984/1995 as per direction of EIC at site. | — | — | — | 1,46,139 | |
| — | 100.00 | — | — | ||
| Supply and laying and fixing of HDPE pipe, 40 mm dia to withstand 8.0 Kg/sq mm pressure confirming to IS:4984/2016 (complete with necessary jointing of pipes as per standard procedure) for protection of cable as per direction of EIC at site. | — | — | — | 13,894 | |
| — | 100.00 | — | — | ||
| Horizontal machine borring under track crossing at a depth of 2.0 mtr below GL including required size HDPE pipe observing all necessary safety for human life and others movement as per direction of engineer at site. | — | — | — | 4,07,734 | |
| — | 200.00 | — | — | ||
| Excavation of cable trench 0.75 mtrs. below the GL with laying of armored cable and refilling the same by supply of 70mm sand and soil after digging the earth. The laying of armoured cable should be done as per direction of Engineer at site. (Cable will be supplied by Railway). | — | — | — | 22,854 | |
| — | 200.00 | — | — | ||
| Laying of LT XLPE insulated armoured aluminium cables with suitable arrangements as per instruction of site engineer. | — | — | — | 1,792 | |
| — | 2.00 | — | — | ||
| Supply, installation,testing & commissioning of 110 V Thyrister based float cum boost charger (Battery chargers) ( 2x100A, Input voltage - 415V AC, out put voltage - 110V DC) as per direction of EIC at site. | — | — | — | 5,93,290 | |
| — | 6.00 | — | — | ||
| Supply and wiring of concealed Light point by PVC insulated unsheathed and stranded Copper Cable 1.5 sq.mm S/C confirming to IS - 694 through PVC Concealed rigid Conduit pipe of wall thickness 2mm of suitable size including flash type 6 A controlling modular switch on concealed unbreakable modular box, cover plate etc. with all accessories and ceiling rose /holder.etc. as required.rom ceiling rose to fan as per direction of EIC at site. | — | — | — | 1,363.92 | |
| — | 10.00 | — | — | ||
| Supply and wiring of concealed fan point by PVC insulated unsheathed and stranded Copper Cable 1.5 sq.mm S/C confirming to IS - 694 through PVC Concealed rigid Conduit pipe of wall thickness 2mm of suitable size including flash type 6 A controlling modular switch on concealed unbreakable modular box, cover plate etc. with all accessories and ceiling rose /holder.etc. as required.rom ceiling rose to fan as per direction of EIC at site. | — | — | — | 3,623.2 | |
| — | 15.00 | — | — | ||
| Supply and concealed wiring of 6A 5 pin plug point concealed by PVC insulated and un-sheathed FRLS multi stranded copper cable, single core 2.5 sq.mm with earth continuity by single core 1.0 sq mm copper cable through PVC heavy guage pipe including MS concealed box. Cable connection to be done through modular controlling switch, socket installed in board, concealed unbreakable modular box, cover plate etc. with all accessories and as per direction of EIC at site. | — | — | — | 5,895.6 | |
| — | 20.00 | — | — | ||
| Supply and concealed Wiring of 16A Plug point concealed by PVC insulated and un- sheathed FRLS multi stranded copper cable, single core 4.0 sq.mm through PVC heavy guage pipe with earth continuity by 1.0 sq.mm multistand copper cable including MS concealed box. Cable connection to be done through modular controlling switch, socket installed in board, concealed unbreakable modular box, cover plate etc. with all accessories and as per direction of EIC at site. | — | — | — | 8,182.8 | |
| — | 200.00 | — | — | ||
| Supply & wiring of continuity through the circuit of Main line/ Submain line by 1.0 sq PVC insulated & unsheathed, single core, multi stranded FRLS copper conductor cable through consealed PVC heavy gayge pipe with modular switch as required. | — | — | — | 1,454 | |
| — | 200.00 | — | — | ||
| Supply & wiring of Main line/ Sub main line by 2.5 sq mm PVC insulated & unsheathed, single core, multi stranded FRLS copper conductor cable through consealed PVC heavy gauge pipe with modular switch as required as per direction of EIC at site. | — | — | — | 3,540 | |
| — | 100.00 | — | — | ||
| Supply & wiring of Main line/ Submain line by 4.0 sq mm PVC insulated & unsheathed, single core, multi stranded FRLS copper conductor cable through consealed PVC heavy gayge pipe with modular switch as required as per direction of EIC at site - | — | — | — | 3,910 | |
| — | 100.00 | — | — | ||
| Supply & drawing & commissioning of PVC Heavy gauge pipe 25 sq mm by concealed wall for drawing of main/submain line as required of EIC at site. | — | — | — | 3,592 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing & commissioning of 18/20W LED tube light fitting with polycarbonate housing with THD less than 20% and surge protection 1.5KV 6000K (4 ft) complete with driver circuit etc and all accessories as per direction of EIC at site. Lumens out put should be not less than 100 Lumens/watt, LED should be as per LM-80/IS: 16105. LED driver's efficiency should be minimum 90%, Power factor of complete fitting should be greater than 0.90, Input operating voltage: 140V to 277V AC and driver should be as per IEC: 62384/IS:16104. The LED fittings should be warranted for 5 years. | — | — | — | 2,321.4 | |
| — | 6.00 | — | — | ||
| Supply of 1200mm sweep, BEE star rated - 5 star rated capacitor type ISI marking ceiling fan with 450mm down rod, canopy and all accessories as per direction of EIC at site. | — | — | — | 8,400.9 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing & commissioning of SPN distribution board 8 way double door metal SPN DB consisting 40A, MCB DP - 1no, 20A, MCB DP -2 nos, 6A, MCB SP- 2 nos with enclosure and necessary fixing arrangements as per direction of EIC at site. | — | — | — | 4,783.26 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS-8_2.pdf
ATTACHMENT
TechCircularwithDrgforEarthingandCableLayingUG.pdf Drawing for pipe earthing and cable lay
ATTACHMENT
GCC_April-2022_2022.pdf
ATTACHMENT
GCCUpdateduptoACS-11_1.pdf
ATTACHMENT
JPO8.5.24-CablediggingworksNFR.pdf
ATTACHMENT
ACS-09.pdf
ATTACHMENT
ACS-10.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
TD-032026-27.pdf
ATTACHMENT
AnnexureNEW.pdf
ATTACHMENT
TechCircularwithDrgforEarthingandCableLayingUG.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .