Construction of Toilet and Rain Shelter at Bye pass Kanlog ward No 34

Amount

Demolition of stone masonry below G.L upto all depth including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lifts – Rubble masonry in cement mortar

Demolition above G.L. upto floor all levels including disposal of unserviceable materials within all leads & lifts and including cutting the necessary reinforcement and separating out from RCC/RB works-RCC work

Cutting in earth work in all kinds of soil including spade work, pick work, jumper work and blasting work and disposal of excavated earth up to all leads and lifts as directed by Engineer-in-Charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Excavation in earth work in all kinds of earth work including spade work, pick work, jumper work, B/work chiseling wedging out of rock etc. up to all lifts in earth work including dressing of sides and bed and disposing of excavated earth to be leveled and neatly dressed as directed by the Engineer-in-charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Providing & laying cement concrete 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

Providing and laying cement concrete 1:1.5:3 (1 cement :1.5: Sand: 3 graded stone aggregate 20 mm nominal size and curing complete excluding cost of form work. Foundation and plinth :

Column, pillars, posts and struts upto floor two level :

Lintels, beams girders bressumers and cantilevers upto floor two level :

Providing mild steel/ Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor all level-tor steel

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Walls including attached buttresses, pilasters and their caps and bases string courses etc. upto floor all level

Providing from work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu-reinforced concrete & plain concrete work in Foundation, footings basis of columns etc. and mass concrete.

Stair cases with sloping or stepped soffits excluding landing

Columns, pillars, posts and struts, square, rectangular or polygonal in plan

Flat surfaces such as soffits of suspended floors, roofs, landings and the like - Floors etc. upto all thickness

Half brick masonry in common burnt clay building bricks in :-Cement Mortar 1:4 (1 cement : 4 sand) First Class Bricks

Providing 2nd class deodar wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enameled iron butt hinges with necessary screws – 40mm thick – 2nd class deodar wood.

P/L G.I. Pipe 15mm dia heavy duty (ISI Marked)

P/F GI/MI union 15mm dia (heavy duty)

Providing and fixing PVC water storage tank syntax or equivalent cost of connecting / tank nipples , making connection etc. 1000 litres capacity

P/F PV.C. Step cock 15mm dia (heavy duty)

P/F P.V.C. Ball cock (heavy duty) 15mm dia

P/F C.P. Brass extension nipple (15mmx50mm) heavy duty

P/F C.P. Brass bib tap 15mm dia (heavy duty)

P/F C.P. Brass angle cock 15mm dia (heavy duty)

P/F P.V.C. Connection pipe 45cm long 15mm dia

P/F C.P. Brass waste pipe 32mm dia for washbasin or sink

P/F Viterous china bowl pattern urinal connection with waste pipe by means of white lead mixed with chopped hamp waste water pipe to be measured paid to be seprately flat back type of size 433x260x350mm

Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan)size 580mm (earth work, bed concrete, foot rest and trap to be measured and paid for separately) – Orrissa pattern

P/F P.V.C. Waste pipe 32mm dia for W.C. & sink

Providing and fixing 100mm size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1 cement: 1 sand) – sand cast iron

P/L 100mm dia P.V.C. Pipe (heavy duty)

P/F C.P. Brass Pillar tap 15mm dia heavy duty

P/F C.P. Brass soap dish (heavy duty)

P/F 100mm dia floor tap (heavy duty)

P/F 100mm dia door bend (heavy duty)

P/F 100mm dia plain bend (heavy duty)

P/F P.V.C. Single Equal Branch 100mm dia (heavy duty)

P/F P.V.C. Collar 100mm dia (heavy duty)

P/F P.V.C. Cowl 100mm dia (heavy duty)

Construction manhole with R.C.C top slabsin 1:2:4 ( one cement :two sand : four graded crushed stone aggregate 20mm (twenty milimetres nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded crushed/ broken stone aggregate 40mm ( forty milimetres nominal size) inside plastering 15mm thick with cement mortar 1:3 ( one cement : three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement : two sand :four graded crushed stone aggregate 20mm finished smooth complete including curing and testing 900x900x1000mm inside size.

P/F Stainless steel round grating 150mm dia with frame heavy duty

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Kota stone slab flooring 20mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 25mm thick

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1 cement: 6 sand)

6mm cement plaster to ceiling in cement mortar 1:4 (1 cement: 4 sand)

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in beams joints channels, angles, tees, flats with connection plates or angle cleets as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Providing and fixing 0.60mm thick prepained steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mircons over 5 mircons primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge

Providing ridges or hips 60 cm over all in plain with galvanized iron G.I. sheet fixed J or L hooks bolts and nuts 8mm dia G.I. limpet and bitumen washers complete-0.63mm thick sheet

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters:- Enamel paint other than white

Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing with white lead for priming

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 125 mm

Providing and fixing anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm

Providing and fixing aluminum tower bolts (barrel type) anodized trans parent or dyed to required shad and colour with screws etc. complete. 150x10mm

Carriage of material by mechanical transport including Loading & unloading & stacking of Muck/Debries in M.C. Dumping site at bharyal free of cost Tansporation charges will be paid extra (10km)

BILAL AHMED BUTT

Devinder Thakur

PUSHPENDER SHARMA

SUNIL SHARMA

Jitender Rana