Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC ADAM KANAN JHARGRAM 721507 | JHARGRAM | WEST BENGAL | 721507 | L1 | Accepted-AOC Lowest Rate | |
| 2 | L2₹10.1 L+₹7,554 (0.75%)Rejected-Finance KADAMKANAN JHARGRAM | JHARGRAM | WEST BENGAL | 721121 | L2 | Rejected-Finance Higher than L1 | |
| 3 | L3₹10.2 L+₹9,264 (0.92%)Rejected-Finance 211 2 NARAYANTALA EAST BAGUIHATI KOLKATA | KOLKATA | WEST BENGAL | 700001 | L3 | Rejected-Finance Higher than L1 | |
| 4 | L4₹10.2 L+₹12,084 (1.20%)Rejected-Finance GHORADHARA JHARGRAM | L4 | Rejected-Finance Higher than L1 | |
| 5 | L5₹10.3 L+₹20,141 (2.00%)Rejected-Finance INDARAGORA BANKURA W B | BANKURA | BANKURA | WEST BENGAL | L5 | Rejected-Finance Higher than L1 |
Tender Value
Refer Docs
EMD Value
₹20,750
Closing Date
18 Oct 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer
Raghunathpur, Jhargram
WBPHE/EE/JMD/NIeT 13_17 OF 2022-2023
2022_PHED_404423_17
WBPHE/EE/JMD/NIeT 13 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
30 days
Jhargram
Please refer Tender documents.
4 documents required · 4 mandatory
₹20,750
Yes
4 Nov 2022
14 Sept 2022
19 Oct 2022
14 Sept 2022
18 Oct 2022
15 Sept 2022
120 days
Amount
Supply and delivery of following materials at site:- Submersible pumping machinery directly coupled with submersible motor at 400 V (± 10%), 50 (± 3%) Hz. Material of Construction :- Pump bowl : Housing : C.I. Pump / Motor shaft : SS-410. Impeller : Bronze/CS/SS NRV Size: 65 mm Starting Method : S/D Speed : 2900 rpm max. Discharge(Q) - 24 m3/hr and Head(H) - 56 mtr. (Test certificate, H&Q characterstic curve shall be submitted at the time of delivery) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
80 mm dia UPVC (Standard type) Column pipe with both side threaded and one side socketed. a) 3 Mtr. Long
b) 1.5 mtr Long
c) Top Adoptor(CI)
d) Bottom Adoptor (C.I)
M.S fabricated split type suitable tube well cover as per tube well housing with necessery clamping arrangement with including holes with column pipe ,air pipe and cable entry etc.
102 mm. dia 0-10 kg/cm² range wall mounted bourden type glycerine filled pressure gauge complete for tubewell outside the pump house (This cost includes 15 mm. dia. G.I. Pipes of approx 30 ft. length & specials). Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Anti-snapping safety device for above pump by supplying suitable dia. Nylone rope of required length (double) including supply of all necessary materials as required.
M.S suspention clamp with necessery nuts & bolts & washer etc suitable for 80 mm dia pipe ( Size 500 mm X80 mm X 8 mm each)
102 mm. dia. wall mounted bourden type glycerine filled depth gauge with suitable dia. and length of steel air pipe with all fittings including supply of one good quality Hand pump for tubewell outside the pump house. (This cost includes 15 mm. dia. G.I. Pipe approx. 30 ft. length and specials) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
80 mm dia, P.N. 1.0, CIDF Non return valve conforming to IS: 5312, part-I. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
80 mm dia, PN-1.0, CIDF sluice valve conforming to IS:14846. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
80 mm dia, (PN-1.0) CIDF, wafer type butterfly Valve operated by three phase actuator conforming to BS:5155 Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
1.1 KV Grade 415 V, 4 core 16 sq.mm. PVC sheathed XLPE insulated Al. armoured cable conforming to IS:1554 (PART-1) 1988 with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
1.1 KV grade, 2.5 sq.mm. 3 core PVC insulated & sheathed copper flat submersible cable IS:694 PART(1) with latest amendments. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
1.1 KV Grade 415 V, 3 core 6 sq.mm. PVC sheathed XLPE insulated Al. armoured cable conforming to IS:7098 (PART-1) 2011 with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
1.1 KV Grade 415 V, 2 core 4 sq.mm. PVC sheathed XLPE insulated Al. armoured cable conforming to IS:7098 (PART-1) 1988 with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV /2277/W-181/19 dated 25.09.2019 with latest amendments.
1.1 KV grade, 12core, 1.5sq.mm copper control cables , solid copper conductor & balance stranded copper XLPE insulated PVC innersheathed , Armoured exruded PVC type ST2 sheated as per IS 7098(Part1) 1988.(For actuator connection from panel) Make :- As per approved vendor list of PHED vide no. PHE/IV /2277/W-181/19 dated 25.09.2019 with latest amendments.
415 V, Three phase PLC Panel with minimum 2 mm thickness and degree of protection IP-54, conforming to IS-8623 with suitable size Bus bar, Digital Voltmeter, Ammeter, Contactor, Delay timer, MCB, Valve Actuator starter etc. with PLC Logic & UPS as per attached technical specifications. i) 7.5 -12.5 HP with SDS (star, delta starter) (Drawing & Bill of material shall be approved by E.I.C) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Automatic plunger type chlorinator (3 phase) for feeding accurately controlled dosage of chlorine solution lnto the water by connecting metering with flow rate of water 0 -100 LPH with maximum pressure of 10 Kg/Cm2 suitable dosing pump & other accessories on the delivery pipe line as required.The pump shall be coupled with 0.5 hp motor having three phase power and 1440 RPM (± 4%). Pump Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (Motor Make- CGL/KEC/ABB/Any approved make)
15 KVA, 3 phase oil cooling type servo motor operated Voltage Stabilizer, having unbalance 200 - 500 V input voltage, and 415(±1%) output voltage , Auto/manual servo voltage stabilizer with U/V,O/V,O/L protection with contactor at output side, input MCB, Ammeter Bell etc. as per I.E rules and as per instruction of EIC. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Hard wooden board (450mm X 304.8 mmx 2 mm thick)
63 Amp, 240/415 V Porcelain fuse unit (Base & Bridge) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
63 Amps, 415 V, ICTPN (Iron Claded Triple Pole Neutral) main switch in sheet steel enclosure having rewireable type fuse grip. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
63 Amps, 415 V Bus-Bar chamber having 4 nos. Aluminium Bus-Bar. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
63 Amp, 4 pole on load change over switch. Make: Havells(category code. IHBFFE0063)/ any other approved make.
40 Amp, 10 kA, 240/415V, 50 Hz Double pole MCB Isolator conforming to IS / IEC: 60947-3, "C" characteristics with enclosure. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
6-32 Amp,10 kA, 240/415V, 50 Hz SP MCB conforming to IS / IEC: 60898-1, "C" characteristics. (6 Amp- 2 nos., 10 Amp-1 no., 16 Amp-1 no.) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
6 way SP&N Double Door horizontal Distribution Board (I/C 2 + O/C 4) conforming to IS 13032 & IS 8623 and IP42/43. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
LED street light luminarie having IP 66 LM6-HPDC Housing, aerodynamically designed with better thermal management. Potted driver is to be provided. The luminaire and housing should be from the same manufacturer(cat no- BRP052 LED 045 CW SLMR FG S1 PSU GR ,System Efficacy greater than 100 lumen/watt) Make- Philips . The manufacturer has to provide LM79/LM80 reports corresponding to the luminaire/LED Chip along with type test Certificate.Respectively the luminaire manufacturer should have an in house NABL Accredited testing facility.
LED street light luminarie having single die ceramic base high power LED light source , IP 66 protection ,PDC Housing with finless design and polycarbonate cover (IL08) with better thermal management / potted driver is to be provided , the luminaire and housing should be from the same manufacturer. Make-Philips. (cat no- BRP062 LED 068 CW SLC S1 PSU,LUMEN O/P-6800) ,System Efficacy greater than 100 lumen/watt)
PVC moulded chair without arm. (Make:- Nilkamal/Supreme/Cello)
PVC moulded table of 850 x 850x 725 mm size. (Make:- Nilkamal/Supreme/Cello)
9 mtr. long swagged steel tabular pole (Designation- 410 SP-26) (Over all length- 9.00 mtr, planting depth- 1.5 mtr), Length of section, Bottom-5.0 mtr, Middle- 2.0 mtr, Top- 2.0 mtr,) Outside Dia & Thickness of Section (Bottom-114.3x4.50mm, Middle-88.9x4.05mm, Top- 76.1x3.25) Approx Weight of Pole - 92Kg. including supply and fixing of C.I. base plate, C.I Cap etc. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Double arm bracket made of 40 mm dia and 1.5 mtr. Long having 270°/90° angle between the arms. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
80 mm cast Iron Blank flange .
Installation of the above supplied item - Dismantling the existing delivery line, valves, short pices & withdrawing the existing pump from the tubewell by derrick arrangement after dismantling the power connection all complete as per direction of E.I.C.
Installation of above supplied Pumping Machinery by jointing submersible cable within the tubewell situated outside the pump house by making derrick arrangement by assembling the column pipes properly and fitting, fixing the pressure gauge, depth gauge, air pipe etc. in position and erection of delivery line & wash out line with the C.I specials and Tee including mending damages goods etc. all complete as per direction. This also includes the charges for laying submersible cable from tubewell to cable jointing Box by underground and connection with Busbars within the cable jointing Box.
Making suitable size pump foundation base with supplying cement, sand, stone chips etc. in the portion of (4:2:1) including plastering neat cement finish etc. at outside pump house (Size: 1.00 mtr. X 1.83 mtr. ). The above base of tubewell is to be made with 250 mm. thickness brick wall on all side with 200 mm. thick F.C. slab on top including plastering and neat cement finishing complete as per direction of EIC.
Fitting fixing of the above valves (as in item no. 8, 9 & 10), specials etc. with newly erected delivery and backwash line by supplying and fitting-fixing of required nos. of nuts, bolts, washers, gaskets etc. as required to complete the work as per direction. All the supports have to be plastered, net cement finish & painting of desired colour as per direction of EIC.
Installation & commissioning of the above supplied chlorinator with all accessories, PVC tank and drawing of power line as per I.E. rules by supplying of necessary wire and continuous earthing. This includes the cost of all necessary CC foundation (at least 200 mm) with concrete mixture (Sand, cement, stone chips) and neat cement finishing by supplying of all required materials and testing the entire set as per direction of E.I.C. (Power will be feed from PLC panel of pumping machinery) N.B - 1) T.C & G.C of pump motor shall be submitted at the time of delivery. 2) All works should be carried out as per relevant & latest IS code.
Installation of the above mentioned voltage stabilizer of on the existing foundation including all connection complete as per direction of E.I.C.
Installation of above mentioned panel on suitable position wall by supplying & fitting-fixing of required nos. of angle, fastners, nut-bolts, washers etc. with necessary earthing arrangements by G.I. strip/wire and mending damaged as per entire satisfaction of EIC.
Fitting-fixing of the supplied wooden board (as in item no. 19) at suitable position on wall with fitting-fixing of supplied 63 Amp Porcelain fuse units (as in item no. 20) on the board by supplying and fitting-fixing of required nos. of nuts-bolts-washers etc. all complete as per direction of E.I.C
Fitting-fixing only Sheet steel main switch (item no.21) on flat iron frame/angle iron frame on wall all complete as per direction of E.I.C
Fitting, Fixing and connection of above supplied changeover switch as in (item no 23) at desired position on wall by supplying all necessary materials to complete the job.
Fitting-fixing only MS Sheet steel metal busbar chamber (item no.22) on angle iron frame at desired position on wall all complete as per direction of E.I.C
Fitting-fixing of the distribution board (as in item no.26) on flat /angle iron frame at desired position on wall of pump house with supplying & fitting-fixing of required nos. of nuts, bolts, washers etc. with necessary earthing arrangement from nearest earth grid by G.I. wire/ strip all complete as per direction E.I.C. This includes the cost of fitting-fixing of the Isolator & MCBs within the DB including necessary power connections by 2.5 mm2 FRLSH copper wire (Havells /KEI/Finolex/ Gloster/ Polycab / other approved make) all complete.
Installation of the Isolator as in item no. 24) at desired position on wall by supplying required fixing materials all complete as per direction of E.I.C.
S&F of 3" dia 1.5 mt minipole with baseplate to be fixed on rooftop incl. S&F of 1.5 mtr long arm bracket (removable type) incl. CC (6:3:1) muffing (450X450X600) with 3 mm thick neat cement finish & painting incl. S&F of 200x150x100 mm 16 SWG GI loop box with necessary power connection by 3x 22/0.3 (1.5 Sq.mm) (2 nos. P&N and 1 no. ECC) 'FRLSH' PVC insulated & unsheathed copper wire (Approved make) in 20 mm size PVC rigid conduit 'FRLSH' (Precision make) incl. necy. fittings as required as per direction of EIC. (for 12m length)
Supply, delivery and fitting-fixing of 230 volt 1200 mm sweep AC ceiling fan with ball bearing complete with all accessories such as blade, canopy, fork, down rod etc. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Supply and installation of 2 mm thick, powder coated anticorosive painted G.I. Fabricated outdoor mounted kenopy type Cable Jointing Box having four legs and six nos. 100 Amps Al Bus bar, hinge type front having IP 54 protection & locking arrangement as per direction of E I C .
Laying of cable 4 core 16 sqmm (as in item no. 11 ) on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.
Laying of cable (as in item no. 14) on wall/surface incl. S & F of MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C.
Laying of three. nos. cables (item no.13 ,14 &15) in underground trench in single tier formation (horizontal) the trench size: 915mm x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre and 4nos. bricks per mtr. as seperator between the cables including filling the space between the bricks & cables and also the trench with shifted soil, leveling up and restoring surface duly rammed
Supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4 core 16 sq.mm cable (as in item no. 11) all complete as per direction of E.I.C.
Supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 1.1 KV Gr. 2 core 4 sq.mm cable (as on item 14) XLPE Armored Alu. Cable all complete as per direction of E.I.C.
Supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4 core 16 sq.mm cable (as in item no. 13) all complete as per direction of E.I.C.
Finishing the end of cable (as in item no. 11 ) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials all complete as per direction of E.I.C.
Finishing the cable (as in item no. 14) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials all complete as per direction of E.I.C.
Finishing the cable (as in item no. 13 ) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials all complete as per direction of E.I.C.
Making internal wiring/electrification of the Pump house by (2x 22/0.3 (1.5 sqmm) + 1x 22/0.3 (1.5 sqmm) single core PVC insulated multistrand FRLSH Grade flexible copper wire through 20 mm PVC conduit pipe/casing by supplying one no. 40 Amp, 10kA, 240/415V,50 Hz SPN/DP MCB Isolator conforming to IS / IEC: 60947-3, "C" characteristics. (As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019) with required module PVC Board & piano key type switch. (ave. run 6 mtr). i) LED Tube set point-2 nos., Bulk Head light point- 1 no., 5 pin 6 Amps. Plug point- 1 no., 16 Amp socket & switch- 1 no, indicator- 1 no. each, with necy. earthing arrangement & one fan point (Total point 6 nos. points) including drawing power by suitable gauge (2.5 mm2) of copper wire from installed cut-out to SPN/DP MCB within DB through 20 mm PVC casing capping (precision make) as per direction of EIC (fittings should be of Philips make & wiring should be with continuous earthing arrangement and 20W two nos. 4 ft long LED tube light sets PHILIPS Astra Line, one no. bulk head (Endura WT202W LED6S NW PSU S2 PC), one no. 0-4 step fan regulator (Humfree), fittings etc to be supplied by agency).
(a)Earthing with 50 mm diameter G.I. pipe 3.64 mm thick x 3Mtr. (10ft.) long and 1 x 4 SWG G.I. wire (4Mtr.long) 13 mm diameter x 80mm (3inch) long G.I. Bolts, double nuts, washer including S & F of 15mm diameter G.I. pipe protection (1 Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed. i) For soft soil by ISI Medium GI pipe.
(b) Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
(c) Extra for treatment of soil by salt and charcoal coke for pipe electrode.
(d) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.Length of busbar is 0.5 mtr.
e) Connecting the equipments body to earth bus bar including S & F 20mm X 6mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes , with bolts, nut , washers etc.
Erection of 9 Mtr long Single Steel tubular pole with sole plate & Cap etc. in CC foundation (size 0.6x0.6 x 1.7 mtrs), having 600x600x750 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt and earthing arrangement by 8 SWG GI Wire,after making drilled holes etc. on pole & carriage of pole upto 1.6 KM from store to worksite including filling up the excavated earth pit with shifted soil and ramming properly.
Extra for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/polythene pipe entry as directed for streel light wiring incl. S & F 20 cmx15cmx10 cm G.I. loop box, 16 SWG & incl. drilled hole in pole.
Supplying & fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint all complete as per direction.
Fixing of the above outdoor type LED Street light luminaires on steel tubula pole alongwith fixing of double arm bracket (as on item no. 18) including making interconnection of the light by supplying of 3 x 1.5 Sqmm PVC, FRLSH single core stranded Cu wire with making earth connection from loop box all complete as per direction of EIC.
Painting of Steel Tubular Pole of 9 mtrs. long and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint - Upto 9.0 mtr. long pole (i) One coat of red lead/Zinc chromate priming per pole
(ii) 1st coat of synthetic enamel paint over the primer
(iii) 2nd coat of synthetic enamel paint over the 1st coat
Making 80 mm dia flange joint to CIDF pipe, specials, valves etc.with supply of necessary nuts, bolts, washers, rubber insertion of 6kg/m2 (3mm gauge) and materials required including dewatering if any tools and plants, labour cost etc. as per specification and direction of EIC( Nut washers,bolts shall be of TATA or any other approve make.)
Add: 18% GST
Add: 1% CESS
Deb KUmar Basu
P K ENGINEERING
SUJOY RANJAN BHOWMICK
M/S NABIN GOPAL SENGUPTA
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .