Loading
Loading…
Loading…
Tender Value
₹9.7 L
EMD Value
₹19,310
Closing Date
24 Sept 2026, 12:00 pm3d left
Er. Gurpreet Singh Bains
Executive Engineer, Electrical Division No. 2, 1st Floor Additional Deluxe Building Sector- 9/D, Chandigarh.
As per NIT
2026_CHD_95461_1
E2/26/102
Open Tender
Electrical Works
Percentage
365 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹19,310
15 Sept 2026
15 Sept 2026
24 Sept 2026
15 Sept 2026
24 Sept 2026
15 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Servicing, inspection, testing and fault diagnosis of 800/1000 KVA Dry Type/Oil Type Indoor Transformer after safely isolating the transformer and dismantling all H.T. and L.T. cable connections. The work shall include thorough cleaning of transformer, checking of terminals, busbar connections, cable terminations, tap changer mechanism (where applicable), tightening of all electrical connections, and inspection of winding and insulation condition.(Please refer DNIT for complete specification of item no.1) | 20 | per job | 3,500 | ₹70,000 |
| 2 | Repairing, servicing, testing, and commissioning of 11 KV HT Vacuum Circuit Breaker (VCB) (Incomer/Outgoing) of rating 400 Amp, 630 Amp, or 800 Amp, including isolation of the feeder, disconnection of HT cables, withdrawal of VCB trolley from the HT panel, dismantling, inspection, fault diagnosis, and rectification of defects. (Please refer DNIT for complete specification of item no.2) | 36 | per job | 3,000 | ₹1,08,000 |
| 3 | Servicing, testing, and repairing of LT Air Circuit Breaker (ACB) of rating 630 Amp to 3200 Amp, 415 Volts, including withdrawal of the ACB trolley from the LT panel, dismantling, inspection, cleaning, testing, fault detection, and rectification of defects. The scope of work shall include checking and servicing of operating mechanism, auxiliary contacts, control wiring, arc chutes, spring charging mechanism, interlocks, and all associated components required for proper functioning of the ACB. (Please refer DNIT for complete specification of item no.3) | 85 | per job | 2,000 | ₹1,70,000 |
| 4 | Checking, testing and fault diagnosis of faulty Current Transformer (CT) / Potential Transformer (PT) metering unit installed in 11 kV H.T. system after taking necessary shutdown and safely isolating the supply. The work shall include opening and disconnecting the incoming and outgoing 11 kV cable connections, dismantling of metering unit covers/panels as required, and carrying out detailed inspection of CTs, PTs, metering circuits, terminal connections, wiring, fuses, links, insulators and associated accessories. (Please refer DNIT for complete specification of item no.4) | 5 | per job | 3,000 | ₹15,000 |
| 5 | Locating of fault in underground laid HT cable with the help of suitable cable fault locating equipment/machine, including identification of the exact fault location through pre-location and pin-pointing techniques. The scope of work shall include arrangement of all necessary testing instruments, power supply, generator set (if required), skilled manpower, tools and tackles required for fault detection.(Please refer DNIT for complete specification of item no.5) | 4 | per job | 8,000 | ₹32,000 |
| 6Supply and laying of following size HT XLPE insulated armoured power cable stranded aluminum conductor sheathed with extruded semi-conducting compound cross linked polyethylene insulated laid up inner sheathed of extruded PVC single layer of galvanized steel flat strip armoured and PVC sheathed over all suitable for 11 KV (earthed) cable to IS: 7098 (Part-ii) 2011 with up-to-date amendments and laying in existing RCC/ HUME/ Metal/ DWC pipe/ trench/ duct/ on surface with MS clamp etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. The HT XLPE cable shall be of Polycab / Havells / R.R. Kabel / KEI/ Finolex make only. | |||||
| 6.01 | Size 70 sq. mm 3 core | 10 | PM | 1,451 | ₹14,510 |
| 6.02 | Size 300 sq. mm 3 core | 10 | PM | 3,117 | ₹31,170 |
| 7DSR item No.23.4 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: | |||||
| 7.01 | 70 sq. mm | 2 | Each | 12,946 | ₹25,892 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 13.41 MB
Tendernotice_2.pdf
PDF • 1.00 MB
BOQ_117251.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .