Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC 56 LALKURTI BARA BAZAR MEERUT CANTT UP 250001 | MEERUT | UTTAR PRADESH | 250001 | L1 | Accepted-AOC Being L1 accepted | |
| 2 | L2₹24.4 L+₹2.3 L (10.5%)Rejected-Finance | L2 | Rejected-Finance Rejected due to not being L1 | |
| 3 | L3₹25.6 L+₹3.5 L (15.9%)Rejected-Finance | L3 | Rejected-Finance Rejected due to not being L1 | |
| 4 | L4₹25.7 L+₹3.6 L (16.2%)Rejected-Finance 561 MOHALLA KHAIRAT ALI MAWANA KALAN MEERUT UTTAR PRADESH 250401 | MEERUT | UTTAR PRADESH | 250401 | L4 | Rejected-Finance Rejected due to not being L1 | |
| 5 | L5₹26.7 L+₹4.6 L (20.8%)Rejected-Finance 10 RAJAN KUNJ ROORKEE ROAD MEERUT 250001 | MEERUT | UTTAR PRADESH | 250001 | L5 | Rejected-Finance Rejected due to not being L1 |
Tender Value
₹39.3 L
EMD Value
₹78,560
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Meerut Cantt
Garrison Engineer (South) Meerut Cantt The Mall Road Meerut Cantt Distt Meerut-250001(UP)
Spl repair of bldg No N-9 OR line at arcuit line of 622 EME BN under AGE B/R-III of GE (South) Meerut Cantt
2023_MES_614743_1
GE/MRT/S/8087/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Meerut Cantt
Please refer Tender documents.
12 documents required · 12 mandatory
₹500
GE (South) Meerut
₹78,560
Yes
9 Nov 2023
21 Aug 2023
25 Sept 2023
22 Aug 2023
23 Sept 2023
11 Sept 2023
Amount
Taking down chowkhat or frames (without taking off shutters from frame) exceeding 1.5 sq. m but n exc 4 sq m each. Complete all as specified and directed.
Taking down chowkhat or frames (without taking off shutters from frame) n exc 1.5 sqm each. Complete all as specified and directed.
M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified and directed.
Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.
M&L gauged shutter shall be made out of U frame 35x35x5mm, 25x25x5mm and 1.5mm thick as shown on drawing. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide and including taking down old doors any type with iron items all specified and directed.
S&F Steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing directed. Note (i) For the purpose of measurement and payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mangries shown on drgs (iii) guard bars, glazing and wire mesh shall be measured and paid for separately. Complete all as specified and directed.
S&F steel ventilators fixed type with glazing bars complete all as specified and directed.
Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0. Complete all as specified and directed.
Supply & fix 140 mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.
S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 125 mm Aluminium handles, cast type, anodised fixed complete all as specified and directed.
S&F in repair mild steel helical door spring 300mm with roller and roller plate fixed with screws or welded to frame complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square n exc 0.50 Sqm in each pane complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortor incl all quoins arches pillars etc. Complete all as specified & directed
M&L Brickwork with subclass `B' through bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:6 except bricks complete all as specified and directed.
Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description. Complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair ccomplete all as specified and directed.
M & L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.
M&L 10 mm thick rendering on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar 1:3 complete all as specified and directed.
M&L three coats of white washing on new ceiling/chajja surfaces including preparation of new plasterd surface complete all as specified and directed.
M&L two coats of white washing on old ceiling/chajja old surfaces including preparation of surface complete all as specified and directed.
M&L Preparing new plastered surfaces & applying two coats of cement base paint. Complete all as specified and directed.
M&L applying two coats of cement base paint on old plastered surface including preperation of surface complete all as specified and directed.
M&L preparation of new plastered surface by applying a coat of putty and making the surface smooth and applying two coats of oil bound distemper for painting complete all as specified and directed.
M&Ltwo coats of oil bound distemper on old plastered urfaces including preparation of surface complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 ( using 40 mm well greded crushed stone aggrgate) as in plinth protection, path etc finished the surface even & fair complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm well graded crushed stone aggregate) for laying of floor etc complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc. Complete all as specified and directed.
M&L 15 to 20mm thick machine cut kota stone slab flooring jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L 15 to 20mm thick machine cut kota stone slab as in riser of steps, skirting and dado and pillar laid over 10mm thick screed bed in cement mortar (CM) 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L 75 mm thick PCC 1:4:8 in type D-2 using (using 40 mm well graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L Preparation of new wooden surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L Preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repair Harrison rails mild steel curtain Rod chromium plated including brackets,stops ,rollers complete of approved quality complete all as specified and directed.
Taking down old existing water proofing treatment from the top of RCC/Arch slab, incl taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish complete all as specified and directed.
M& L 25mm thick PCC 1:2:4 type B1(using 20 mm well graded crushed stone aggregate) as in padding on roof surface, finished fair and even without using extra cement complete all as specified and directed.
M&L 20mm thick scread bed in cement mortar 1:4 on concrete surfaces of roof, mixed with water proofing compound (WPC) @ 200ML per 50 Kg of cement consumed or as per manufacturer's instructions finished even and smooth complete all as specified and directed (Note :-WPC shall be measured and paid for separately under respective item of schedule ‘A’ ). Complete all as specified and directed.
M&L for cleaning of concrete of plastered surface of roof and applying priming coat using with bituminous primer @ 0.30Kg per Sqm followed evenly by a tack coat @ 1.20 Kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160gm per sqm) unrolled & bonded to substrate with side and end lapse 75mm and 100mm as per manufactures instructions and applying over it of tack coat using 85/25 grade industrial hot blown between @ 1.20Kg per Sqm and finally finish the top by providing PCC tiles of size (200x200mm) and (20-22mm) thick machine made laid on cement sand mortor (1:4) screed 12mm thick. The joint of the tiles shall be grouted and flush pointed with cement sand mortor (1:3) mixed with integral water proofing compound complete all as specified and directed (including existing water tank on roof disconnected and after cleaning same position re-connecting). Complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for anodised aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including 5 to 6 mm thick glass all fixed to frame including dismantling old partition complete all as specified and directed.
M&L PCC 1:3:6 type C-0 (using 12.5 mm well graded crushed stone aggregate) for hold fast pressed steel frame etc. Complete all as specified and directed.
Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed.
M&L in repair 2mm thick fiber glass reinforced trancslucent plain sheet fixed with and including catch srew and nut bolts as in sun shade chajjas etc fixed in any position and height complete all as specified and directed.
S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc complete all as specified and directed.
S&F Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortor 1:6, complete all as specified and directed.
M&L for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block rubber moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.
Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces area. Complete all as specified and directed.
M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC surface conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/fancy/bell/street light point controlled by one, one way switch 05 / 06 Amps.
All as per serial item No 51.00 here-in-before but one controlled by one, one way switch 05 / 06 Amps. Complete all as specified and directed.
All as per serial item No 51.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. Complete all as specified and directed.
S&F in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts. Complete all as specified and directed.
S&F in repair socket outlet 3 pin, 05 / 06 Amps flush type 240 volts. Complete all as specified and directed.
S&F in repair steped type electronic fan regulator flush type AC, 230 volts, complete all as specified and directed.
S&F in repair LED tube light fitting 4 feet long wall mounted 20 Watt, 230 V, MS batten with retrifit T8 glass tube, including LED 20 watt T8 etc complete with all accessories. Complete all as specified and directed.
S&F in repair LED security light fitting 35 watt suitable for 230 volt single phase complete with all accessories. Complete all as specified and directed.
S&F in repair ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.
S&F in repair old unserveceable Ceiling fan BLDC type 1200 mm sweep 230 volt single pole. Note :- Old unsv ceiling fan of any sweep shall be deposited at MES store yard. Complete all as specified and directed.
M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. conforming to IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing surface. including taking down old unsv submain wiring . Note:- One meter of non-metallic PVC conduit of 25mm dia along with 2x6 sq mm wire and one 6.0 sq mm earth wire shall be measured as one unit length.
S&F in repair Sheet metal enclosure for DB's with IP 43 protection 200 amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties & circuit identification labels 240 volt SPN 8 way complete all as specified and directed.
S&F in repair vertical type IP-43-IK09 protection metal door DB 200 Amps rated copper bus bar, pan assembly etc with interlocking links, blanking plates cable ties identification labels TPN 4 way complete all as specified and directed.
S&F in repair MCB SP, AC, 240 volts of 06 to 40 Amps, B curve, 10 kA, complete all as specified and directed.
S&F in repair MCB SPN, AC, 240 volts of 40 Amps, B curve, 10 kA, complete all as specified and directed.
S&F in repair Isolator TPN 415 volt 100 Amps 10 KA, 50 Hz, complete all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I. Complete all as specified and directed.
Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4.0 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.
Supply, laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection including taking down old unserviceable steel tubes complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth for foundation etc for shafts wells, cesspits, manholes, pies hole cable laying etc. n. exe. 10 Sqm on plan and n. exe. 1.5mm depth and getting out in soft / loose soil complete all as specified and directed.
M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed.
M&L for continous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed.
Removing surplus excavated materials n.exc. 50 meter distance and depositing where directed at a level n. exc. 1.5 meter above the starting point complete all as specified and directed.
M/S ABHI ASSOCIATES
MEEFIN ELECTRONICS
R.D.Builders
SA construction co.
High Tech Metal India
Tayal Builders
M/S Praveen Kumar and Sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .