Annual Rate Contract for Attending the Faults of Split/window/ductable AC installed over L-3E and 4 including Yamuna Bank Depot and respective staff quarters

Total of Schedule-A

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Total of Schedule-A

APPENDIX- 3A

PROFORMA FOR STATEMENT OF MINOR DEVIATIONS

(Refer Clause C 2.2(d) and C 15.1 of ITT)

1. The following are the particulars of minor deviations from the requirements of the Tender Document:

1. The Tenderer shall indicate price reduction against each deviation in Appendix-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer.

2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents.

3. It shall be noted that in case Nil/Zero/NA Price quoted by Tenderer in Appendix-3A then it shall mean that contractor has quoted same price for deviation and undeviation bid.

4. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Appendix, it will have no effect.

Signature of authorized signatory

On behalf of Tenderer

The bill of Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers, Special Conditions of contract, Employers Requirements, Technical Specfications, GCC etc.

BoQ consists of one schedules i.e. Schedule-A.

The rates and prices to be tendered in the unit Priced Bill of Quantities are for completed and finished items of works and complete in all respect. It will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.4 & C2.5 of ITT & clause 9 of SCC.

If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-responsive and shall be rejected.

Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions.

The Financial Proposal (as per BOQ) shall be uploaded online on the website http://eprocure.gov.in/eprocure/app. The rates shall be quoted in the excel file provided in the bid documents. The tenderer shall download the excel file and quote the rates in BOQ1. After quoting their rates the excel file shall be uploaded accordingly. The rates shall not be offered/quoted elsewhere in the technical submission/ tender submission.

The actual work executed against all the BOQ as detailed in tender document would be paid as per clause 14 of Special Conditions of Contract (SCC) and clause 4 of ER.

The price offer in BOQ shall be given without consdering any deviation mentioned in Appendix-3 of FOT i.e. price in this box shall be quoted as per tender condition without any deviation.

Bill of Quantity (BOQ)

SCHEDULE-A

Supply , installation & commissioning of compressor & Gas charging (1.5 ton Rotary) including pressure testing, leak removal & vaccumising Make-Hitachi/ Techomsaw/Kirloskar/Emerson.

Supply, installation & commissioning of compressor & Gas charging (2.0 ton Rotary) including pressure testing, leak removal & vaccumising Make-Hitachi/ Techomsaw/Kirloskar/Emerson.

Gas charging including pressure testing, leak removal, vaccumising. (1.5 Ton)

Gas charging including pressure testing, leak removal, vaccumising. (2.0 Ton)

Supply, installation & commissioning of 1.5/2.0 Ton capacity copper condensing coils including gas charging/gas topping up. Make-Bluestar/Voltas/Hitachi/Daikin

Supply, installation & commissioning of 1.5/2.0 Ton capacity copper Evaporating coils including gas charging/gas topping up. Make-Bluestar/Voltas/Hitachi/Daikin

Supply, installation & commissioning of indoor fan motor of ISI make/reputed brand (1.5 Ton/2.0 Ton) for Bluestar/Hitachi/Daikin/Voltas

Supply & installation of of ODU fan motor (1.5 Ton & 2.0 Ton Ac's) Make-(Daikin)

Supply & installation of of ODU fan motor (1.5 Ton & 2.0 Ton Ac's) Make-(Hitachi, Bluestar,Voltas etc)

Supply and installation of Fan blade for 1.5/2.0 Tr. Split Ac's

Supply and installation of Capilary filter for 1.5/2.0 Tr Split Ac's

Supply and installation of Single phase contactor for 1.5/2.0 Tr. Split AC's

Supply and installation of copper pipeline with sleeve 1/2'' & 1/4'' for 1.5 Ton & 2.0 Ton

Supply and installation of Valve Set 1/2", 1/4",3/8'' & 5/8'' for 1.5 Ton & 2.0 AC's

Supply & installation of running capacitor 50µf

Supply & installation of running capacitor 45µf

Dismantalling of Split AC's 1.5 Ton & 2.0 Ton

Installation of Split AC's 1.5 Ton & 2.0 Ton

Dismantalling & re-installation after repairing of PCB card 1.5 Ton & 2.0 Ton AC's Make-(Daikin)

Dismantalling & re-installation after repairing of PCB card 1.5 Ton & 2.0 Ton AC's Make-(Hitachi, Bluestar, Voltas etc)

Gas charging including pressure testing, leak removal, vaccumising. (4.25 Ton)

Gas charging including pressure testing, leak removal, vaccumising. (8.5 Ton)

Dismantalling & re-installation after repairing of PCB card 8.5 Ton & 4.25 Ton AC's

Supply of Compressor 4.25 Ton

Dismatalling and reinstallation of Compressor 4.25 Ton AC's

Repairing of ODU fan motor 4.25 Ton & 8.5 Ton AC's

Supply and installation of ODU fan motor 4.25 Tr and 8.5 Tr Ac's

Repairing of indoor fan motor 8.5 Ton AC's

Supply and installation of Valve Set 1/2'' & 7/8''

Supply and installation of Contactor Relay 3ph make L&T

Supply and installation of oveload relay (L&T)

Supply and installation of drier filter for 8.5 Ton AC's

Supply, installation and commissioning of Condenser coil of AC ODU ductable unit 8.5 Tr

Supply and installation of ODU fan blade for 8.5 Tr. Ductable Split AC's

Supply and installation of Expansion Valve for 8.5 Tr. Ductable Split AC's

Supply, installation & Commissioning of 8.5 Tr. Evaporator coil including gas charging/gas top up.

Supply and installation of Drain tray of 8.5 Tr. Ductable Split AC's.

Supply and installation of Canvas duct for 8.5 Tr. Ductable Split AC's unit.

Supply and installation of blower motor for 8.5 Tr. Ductable Split AC's

Preventive maintenance of 8.5 Tr. Ductable unit AC's(including ODU and IDU)

PCB repair of Inverter type hot & cold split AC 1.5/2.0/3.0 Tr (Daikin, o-general, Mitsubishi etc.)

Leak testing & gas charging (R-410/R-32) in inverter type 1.5 Tr split AC/Window AC (Daikin, o-general, Mitsubishi etc.)

Leak testing & gas charging (R-410/R-32) in inverter type 2.0 Tr split AC /Window AC (Daikin, o-general, Mitsubishi etc.)

SITC of PCB suitable for 1.5/2.0/3.0 Tr inverter type hot / cold Split / window AC

SITC of Ouotdoor unit motor for inverter type split AC

SITC of Indoor unit motor for inverter type split AC

Serivcing of Split AC 1.0/1.5/2.0/3.0 Tr

Repairing of condenser outdoor unit motor of split AC

Dismantalling & installation of compressor (1/1.5/2.0 Tr split AC) excluding gas charging & compressor shall be supplied by DMRC

Re-insulation of copper pipe

Supply & installation of drain pipe for split AC PVC piping (size 32/40 mm)

Total Amount of Schedule-A (excluding GST)

GST amount (18%)

Total Amount of Schedule-A (including GST)