CONSTRUCTION OF BATHING GHAT AT LOWER NARYANA BLOCK KHOUR UNDER THE CDF FUND FOR THE YEAR 2025-26,

Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:ALL KINDS OF SOIL

P/L CEMENT CONCRETE OF 1 5 10 MIX EXCL THE COST OF CENTERING AND SHUTTERING ALL COMPLETE WITH 40MM NOMINAL AGGREGATES

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 MIX with 20mm nominal aggregates all complete.

Brick work with common burnt clay Modular bricks of class designation 7.5. in foundation and plinth including curing complete in :1:6 mix

Extra for Brick masonry in superstructure above plinth level upto floor V level.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 MIX with 20mm nominal aggregates all complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Cold twisted bars

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

PROVIDING AND LAYING 6MM THICK CEMENT PLASTER AT CEILING 1:3 MIX ALL COMPLEE

PROVIDING AND LAYING 12MM THICK CEMENT PLASTER IN 1:6 MIX ALL COMPLETE

PROVIDING AND LAYING 15MM THICK CEMENT PLASTER IN 1:6 MIX ALL COMPLETE

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade: ON NEW WORK

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes 75mm diameter pipes

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank OF STAR, SYNTEX, VICTREX, TRIPLE LAYER OF WHITE COLOUR OR EQUIVALENT AS APPROVED BY ENGINEER IN CHARGE .

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingRectangular shape 453x357 mm

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 20 mm dia. nominal bore

CENTERING AND SHUTTERING FOR FOUNDATION , FOOTINGS AND BASES OF COLUMNS

CENTERING AND SHUTTERING FOR SUSPENDED FLOOR

CENTERING AND SHUTTERING FOR EDGES OF SLAB

CARRIAGE OF MATERIALS BY MEANS OF M.T FOR SAND FOR 6 KM

CARRIAGE OF MATERIALS BY MEANS OF M.T FOR AGG FOR 6KM

CARRIAGE OF MATERIALS BY MEANS OF M.T FOR BRICKS FOR 6KM

SUPPLY AND FIXING OF INTERNAL AND EXTERNAL ELECTRICFICATION INCL FROM SERVICE MAIN TO THE METER POINT AND THEN TO THE MAIN CIRCUIT BOARD, SWITCHES, SOCKET , SWITCH BOARD, MCB, 0.5HP ELECTRIC WATER PUMP AND OTHER ACCESSORIES OF HANDPUMP ETC READY TO USE WITH INSTRUCTION OF SITE ENGINEER INCHARGE ALL COMPLETE

ADD COST OF SIGN BOARD INCLUDING WRITING PAINTING COMPLETE

Please Enable Macros to View BoQ information