TN 48 25 26 Tirupur Division TPR 094

Picking the existing BT surface upto 50mm depth as directed by the departmental officers and collecting the picked up salvaged metal and stacking the same for reuse and deposting the debris excluding cost of materials including all labour charges for pickig and all other tools and plants employed for the work and including all other incidental charges etc., complete, as per MORTH Specification.

Road Work

Earthwork excavation in all classes of soils except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour charges, materials, tools, equipments and all incidental charges, removal of other deleterious matter and obstructions, trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials etc., complete as per standard specification For Box cutting for widening portion. (MORTH No. 111, 112, 301, 305, 900)

Road Work

Branch Road Improvements

EARTH WORK FOR BERMS INCL. COMPACTION - Earthwork excavation in all classes of soils except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour charges, materials, tools, equipments and all incidental charges, including compacting with power roller, watering, including all hire and fuel charges for all tools and plants, removal of other deleterious matter and obstructions, trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials etc., complete as per standard specification. For Formation of Embankment & Sub grade using Carted earth. (MORTH No. 111, 112, 301, 305, 900)

Road Work

EARTH WORK FOR MAKINFG UP BERMS USING BOX CUT EARTH - Excavation for Roadway and drainage Excavation including removal and satisfactory disposal of all materias necessary for the construction of roadway and side drains in accordance with the specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer, as per MORTH Specification. For making up berms using cut earth (MORTH No. 111, 112, 301, 305, 900)

Road Work

Granular Sub Base - Providing, laying, spreading and compacting graded stone aggregates for Granular Sub Base, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 for Grade - V Material (MORTH No. 111, 112, 401, 900)

Road Work

Branch Road Improvements

Granular Sub Base - Providing, laying, spreading and compacting graded stone aggregates for Granular Sub Base, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 for Grade - III Material (MORTH No. 111, 112, 401, 900)

Road Work

Branch Road Improvements

Wet Mix Macadam -Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 (MORTH No. 111,112, 406, 900)

Road Work

Branch Road Improvements

Prime Coat Over WBM/ WMM surface - Providing and laying Prime Coat Over WBM/ WMM surface using 7 Kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 502 of MORTH Rev-5 (MORTH No. 111 ,112, 501, 502, 900)

Road Work

Branch Road Improvements

Tack Coat Over Primed Surface - Providing and laying Tack Coat over WBM/ WMM surface (treated with primer) using 2.50 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev (MORTH No. 111,112,501, 503,900)

Road Work

Branch Road Improvements

Tack Coat Over Existing BT Surface - Providing and laying Tack Coat Over Existing BT surface using 2 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 503 of MORTH Rev-5e as per Clause 503 of MORTH Rev (MORTH No. 111,112,501, 503,900)

Branch Road Improvements

BM (Grade-II) 50mm Thick Using VG30 - Providing, laying 50mm consolidated thick Bituminous Macadam using 0.20cum of 26.50-13.20mm, 0.43cum of 13.20-2.36mm and 0.08cum of 2.36mm & below size IRC metal with 37 Kgs of VG30 Grade bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen, aggregate and mixing them in required temperature using Central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause for Grade - II (MORTH No. 111, 112, 505, 900)

Branch Road Improvements

DBM (Grade-I) 75mm Thick Using VG30 Bitumen - Providing, laying 75mm consolidated thick Dense Bituminous Macadam using 0.40cu.m of 37.50-13.20mm, 0.35cu.m of 13.20-2.36mm and 0.36cu.m of 2.36mm & below size IRC metal with 71.30kgs of VG30 grade bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen, aggregate and mixing them in the required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to site, spreading the mix to uniform thickness of 75mm with mechanical paver to the specified grades and cross sections and consolidated by Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause for Grade - I. (Morth No. 111, 112, 505, 900)

Branch Road Improvements

DBM (Grade-I) 75mm Thick Using VG40 Bitumen and more than 5m width Paver - Providing, laying 75mm consolidated thick Dense Bituminous Macadam using 0.40cu.m of 37.50-13.20mm, 0.35cu.m of 13.20-2.36mm and 0.36cu.m of 2.36mm & below size IRC metal with 71.30kgs of VG40 grade bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen, aggregate and mixing them in the required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to site, spreading the mix to uniform thickness of 75mm with mechanical paver finisher hydrostatic (more than 5m width) to the specified grades and cross sections and consolidated by Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause for Grade - I (MORTH No. 111, 112, 505, 900)

Road Work

BC 30/40mm Thick (Grade-II) Using VG40 Bitumen (more than 5m width) - Providing and laying Bituminous Concrete to 30/40mm thick using 0.13 cu.m of 19.00-9.50mm, 0.17 cu.m of 9.50-2.36mm and 0.26 cu.m of 2.36 and below with 50.30kgs of VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, paver finisher hydro­static (more than 5m width), Vibratory / Pneumatic roller and all other tools and plant re­quired, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause for Grade-II (MORTH No. 111, 112, 501, 507, 900)

Road Work

BC 30/40mm Thick (Grade-II) Using VG30 Bitumen - Providing and laying Bituminous Concrete to 30/40mm thick using 0.13 cu.m of 19.00-9.50mm, 0.17 cu.m of 9.50-2.36mm and 0.26 cu.m of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause for Grade - II (MORTH No. 111, 112, 501, 507, 900)

Branch Road Improvements

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres. (Existing Structure PCC)

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Earthwork excavation in all classes of soils except hard rock requiring, blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour materials, tools, equipments and all incidental charges and sheeting, shoring and bracing and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, Trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials, etc, complete as per standard specification for foundation Box Culvert and Wing Wall (MORTH No. 111, 112, 301, 305, 900)

Box culvert at Km 33/6

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Retaining wall at Km 33/8

Retaining wall at Km 35/4

Vibrated Cement Concrete of Grade M15 (Nominal Mix) using 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water, labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for BASE COURSE OF BOX CULVERT & RETAINING WALL (MORTH No. 111, 112, 1000, 1500, 1700, 2200, 900)

Box culvert at Km 33/6

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Retaining wall at Km 33/8

Retaining wall at Km 35/4

Vibrated Reinforced Cement Concrete M25 Grade (Design Mix) using ISS HBG metal including cost and conveyance of all materials to site and cement at site but excluding cost and fabrication of steel, including labour charges for mixing, transporting, laying, curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete for BOX CULVERT. (MORTH No. 111, 112, 1000, 1500, 1600, 1700, 2300,900)

Box culvert at Km 33/6

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Vibrated Reinforced Cement Concrete M25 Grade (Design Mix) using ISS HBG metal including cost and conveyance of all materials to site and cement at site but excluding cost and fabrication of steel, including labour charges for mixing, transporting, laying, curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete for RETAINING WALL BELOW SILL LEVEL. (MORTH No. 111, 112, 1000, 1500, 1600, 1700, 2300,900)

Box culvert at Km 35/4

Retaining wall at Km 33/8

Retaining wall at Km 35/4

Vibrated Reinforced Cement Concrete M25 Grade (Design Mix) using ISS HBG metal including cost and conveyance of all materials to site and cement at site but excluding cost and fabrication of steel, including labour charges for mixing, transporting, laying, curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete for RETAINING WALL ABOVE SILL LEVEL. (MORTH No. 111, 112, 1000, 1500, 1600, 1700, 2300,900)

Box culvert at Km 35/4

Retaining wall at Km 33/8

Retaining wall at Km 35/4

Supply and fabrication of STEEL Fe500/ Fe500D/ Fe550/ Fe550D grade with suitable anticorrsive measure required for all the reinforced cement concrete items of work involved in the shedule including cost of steel, cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, hoisting and placing the reinforcement in position as specified in the drawing including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete. (MORTH No.1000, 1500, 1600, 900)

Box culvert at Km 33/6

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Retaining wall at Km 33/8

Retaining wall at Km 35/4

Vibrated Cement Concrete of grade M20 (Nominal mix) using 40mm ISS HBG granite metal including cost and conveyance of all materials to site including cement at site, including cost of form work, soft water, labour charges for mixing, transporting, laying and curing concrete, worikingat depths, Hire charges for Tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc, complete as per relevent standard specification for PARAPETS & Wing Wall. (MORTH No. 111, 112, 1000, 1500, 1700, 2200, 900)

Box culvert at Km 33/6

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Retaining wall at Km 33/8

Retaining wall at Km 35/4

Vibrated Cement Concrete of grade M20 (Nominal mix) using 40mm ISS HBG granite metal including cost and conveyance of all materials to site including cement at site, including cost of form work, soft water, labour charges for mixing, transporting, laying and curing concrete, worikingat depths, Hire charges for Tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc, complete as per relevent standard specification for for Kerb Median [Semi Barrier Type] (MORTH No. 111, 112, 1000, 1500, 1700, 2200, 900)

Centre Median

Vibrated Reinforced Cement Concrete M30 Grade (Design mix) using ISS size hard broken granite metal including cost and conveyance of all materials to site cost of premoulded expansion joints and fixing the same in position including cost and labour charges for formwork, labour charges for laying, compacting, curing including all other incidental charges etc.,complete for WEARING COAT 75mm UNIFORM THICKNESS OVER DECK SLAB AND OVER APPROACH SLAB. (MORTH No. 111, 112, 1000, 1500, 1600, 1700, 2300,900)

Box culvert at Km 33/6

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Filling inbetween Culvert and Road with Quarry Dust including cost and conveyence to site including labour charges for filling in layers , watering , tamping under optimum moisture content to get themaximum density and all other incidental charges etc., complete as per MORTH Specification (Rev- V) (MORTH No. 304, 2907)

Box culvert at Km 33/6

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Providing and fixing Class I PVC seepage pipes of 110mm dia of required lengths for abutments and return walls including costs and conveyance of all materials to work site and labour charges for fixing etc., complete to drain from the backfill as per section 2706 of MORTH specification (Rev- V) (MORTH No. 2706, 900)

Box culvert at Km 33/6

Box culvert at Km 34/6

Box culvert at Km 34/8

Box culvert at Km 34/10

Box culvert at Km 35/4

Box culvert at Km 39/8

Retaining wall at Km 33/8

Retaining wall at Km 35/4

Excavation for Roadway and drainage Excavation including removal and satisfactory disposal of all materias necessary for the construction of roadway and side drains in accordance with the specifications and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer, as per MORTH Specification. Refilling for Kerb Median [Semi Barrier Type] Center portion using Carted earth

Centre Median

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied Thermoplastic compound 2.5 mm. thick including reflectorising glass beads @ 250 gms. per sqm. area, thickness of 2.5 mm. is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MORT&H specification No.803

Road Furniture Work

Road Markers/Road Stud with Lens Reflector - Providing and fixing reflective road studs of 'category A' Raised pavement markers made out of poly carbonate / ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW/NH. 33023/10/97-DO.III dt 11.06.97 and the height,width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13sq.cm on each side and the slope to the base shall be 35+/- 5 degree.Each reflector shall have a CIL not less than values specified in Table2 of said MORTH circular.The strength of deatchment of the integrated cylindrical shanks,(of diamter not less than 19*/- 2 mm and height not less than 30*/- 2mm )from the body is to be a minimum value of 500kgf.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manifacture's recommendation and complete as directed by the engineer. The marker shall support a load of 13635Kg tested in accordance with ASTM D4280 and confirming to IRC35-2015 guide lines and MORTH specification 804 etc., complete.

Road Furniture work

Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2022. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022. (as per MoRT&H Specification No.801) (60 cm circular)

Road Furniture Work

Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2022. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022. (as per MoRT&H Specification No.801) (80 cm x 60 cm rectangular)

Road Furniture Work

Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2022. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022. (as per MoRT&H Specification No.801) (90cm Equilateral Triangle Board)

Road Furniture Work

Providing and erecting of retro refectorised Hazard Marker Traffic sign made out of HIgh Intensity Prismatic Grade sheeting confirming to TYPE-IV standards of IRC 67-2012 and ASTM D 4956-09, specification and fixed over 2mm thick alumininum sheet fixed over a back supporting frame of 25mm X 25mm X 3mm mild steel angle and supportred on mild steel angle iron post 75 mm X 75mm X6mm with a clear height not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly desigmed foundation with M15 grade cement concrete 45mm X 45mm X 60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High intensity Retro-Reflectro sheet shall consist of minimum coefficient of retro-Reflction as per Table 6.6 of IRC 67-2012.The retro-reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67-2012(as per MORTH specification no 801) (30cmx90cm Rectangular board)

Road Furniture Work

Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2022. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022. (as per MoRT&H Specification No.801) (90 cm octagon)

Road Furniture Work

Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2022. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022. (as per MoRT&H Specification No.801) (80 cm x 60 cm rectangular - Chevaron board)

Road Furniture Work

Providing fixing of Rigid Median Marker double sided made of polycarbonate for impact resistance and good weather ability. Polycarbonate used for molding the median marker shall have a minimum Izod impact strength value of 600 J/m at room temperature. The impact strength of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the form of an isosceles trapezoidal structure of length 15 cm height and width of 10 x 10 cm. The median marker shall have fluorescent yellow retro - reflective sheeting confirming to Type XI specifications as per ASTM D 4956. Area of reflective sheeting should not be less than 70 cm2. Edge of retro reflective shall be concealed using a grill/ mesh/similar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker for distinct identification.

Road Furniture Work

Proving and fixing Solar powered Traffic Blinkers of 30cm dia with Polycarbonate Dome 5mm Red of Led 150 Nos. iri each Red Blinkers Light - 1 No. with Red / White / Blue Led Blinkers Delineator Solar Panel :12v 50w Solar Panel — 1 No. 12v 18 AH Battery -1 No. with Box, Solar Circuit Controller Board Box.Straight Pole : MS Pole 3” dia 2.5mm thick 18 Feet height pole (1 No.) with 2 Feet under ground pole foundation, pole painting including transportation charges, installation charges etc., complete as per standard specification.

Road Furniture Work

Calculation of SubTotal, GST and Total Amount carried out by system automatically

Basic cost of value put to tender as per estimate

Add GST at 18%

Total Value put to Tender

Differnce Amount (Excess/Less)

Quoted Amount (Basic Rate Only)

Add GST at 18% of of Quoted Amount

Total Value of Quoted Amount Including 18% of GST

Please Enable Macros to View BoQ information