Annual repair maintenance and modification of water supply including day to day operation of valves for distribution at different locations at Gevra Project of Gevra Area

Amount

Part-A (Annul Repair & Maintenance

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 62.50 mm nominal inner dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

PART B : - New Bore Hole 4 Nos

Drilling perfectly vertical bore up to desired depth in all land of soil, rock etc. as per instruction of the EIC

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia

Providing fixing 2 HP ISI make submersible pump as per instruction of the EIC

Providing Fixing sling rope (80 M) as per instruction of the EIC

Providing & fixing panel as per instruction of the EIC

Providing & fixing 4 sqmm cable for electrical installation as per instruction of the EIC

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipes

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing Gun Metal Gate valve with C.I. wheel of approved quality (screwed end) : 15 mm nominal bore

PART C:- Day to day operation of valves

Operation of drinking water pipe line / valves at different location for supply of water from OHT / Bore well to different offices etc. including cost of tools & plants as per instruction of the EIC. Note : - (1) Minimum 01 Nos. semiskilled labour to be engaged pe day (2) : - If the contractor failed to provide required number of main power per day as per contract, recovery @ double the unit rate manpower derieved as per the analysis / justified or awarded rate whichever is higher shall be made from the contractor' s bill

Assistance required for repairing of damaged drinking water pipe line of all diameter including repairing / replacement of fittings ( only labour charges ) at different location, cost of tools plant as per instruction of EIC Note :- (1) Minimum 01 No. fitter and 01 No. helper to be engaged per day (2) :- If the contractor failed to provide required number of man power per day as per contract, recovery @ double the unit rate of manpower derived as per analysis / Institute or awarded rate which is higher shall be made from the contractor's bill.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Union 50 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Union 32 mm dia

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Union 40 mm dia

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Union 25 mm dia.

Supply of GI fittingcomplete as per instruction Engineer-in-Charge, GI Union 20 mm dia

Supply of GI fittingcomplete as per instruction Engineer-in-Charge, GI Union 15 mm dia.

Supply of GI fittingcomplete as per instruction Engineer-in-Charge, GI Soket 25 mm dia

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Soket 20 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Soket 15 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Soket 32 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Soket 40 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Soket 50 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Soket 25 mm dia

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Tee 20 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Tee 15 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Tee 32 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Tee 40 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Elbow 25 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Elbow 20 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Elbow 15 mm

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Elbow 32 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Elbow 40 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Reducer 25 mm to 20 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Reducer 25 mm to 15 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Reducer 20 mm to 15 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Nipple 20 mm to 150 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Nipple 20 mm to 100 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Nipple 15 mm to 300 mm dia.

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Nipple 15 mm to 150 mm dia

Supply of GI fitting complete as per instruction Engineer-in-Charge, GI Nipple 15 mm to 100 mm dia.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I.Wheel of approved quality (screwed end) 15 mm nominal bore.

Supply of 15 mm C.P.Bras pillar cock as per instruction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipes

Supply of reducer GI ELblow 25 mm to 20 mm

Supply of GI fittings… etc Reducer GI ELblow 25 mm to 15 mm.

Supply of GI fittings… etc Reducer GI ELblow 20 mm to 15 mm.

Total impact of GST for the purpose of CTC

DC Enterprises

A. K. Rakesh (Arvind Kumar Rakesh)

SATISH KUMAR AGRAWAL

M/S GOYAL GROUP

ENERGENIQ SOLUTIONS

P.S ENTERPRISES

ABKASH SINGH

BHAKULAL SAHU

SAHU INFRA PROJECTS