Periodical services to certain Bldgs and comprehensive repair for day to day complaints at Sewar fort Bharatpur Mil Stn

Amount

M&L for rendering 15 mm thick in CM (1:6) on stone masonry surfaces or other fair surface of brick-work or on one side of lathing upto 10 m height ,finished fair & even Including taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water complete all as specified

All as above item no 1 but in CM (1:4) finished even and smooth on fair faces without using extra cement complete all as specified

M&L for Rendering 15 mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified

Ditto as above item no 3 but in CM (1:4) finished even and smooth without using extra cement on fair faces of brick work complete all as specified

M&L for two coats (1.5mm thick each) wall care Putty on Wall Surface including sand paper gentle rubbing to obtain smooth surfaces & Mixing is done by using mechanical stirrer including all necessary arrangement for execution of work complete all as specified

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc including finishing the surface even and smooth without using extra cement & Taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water complete all as specified

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of Priming with alkali resistant priming paint with hand roller complete all as specified

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified

M&L for three coats of white wash on new plastered or unplastered surfaces of walls including prepration of surfaces complete all as specified

M & L Preparation of old decorated plastered or undecorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified

All as per Srl item No 11 here in above but applying one coat of white wash on ceiling complete all as specified and as directed

M&L for preparation of New plastered surfaces and applying two coats of exterior emulsion paint (weather proof anti algae) 100% acrylic emulsion paint over a coat of EXTERIOR WALL PRIMER complete all as specified

M&L applying Asian Paints SmartCare Damp Proof fiber reinforced elastomeric liquid water proofing membrane or equivalent applied on newly plastered surface as per manufacture instruction aal as specified. Note :-(1) For New masonry surfaces must be allowed to cure completely. It is recommended to allow 14 days as the curing time for new masonry surfaces. (1) Apply SELF PRIMING Coat of Damp Proof Ultra Fibre reinforced lquid layer In ration of 3:1 of (Used water as thinner ) @5.5 Sqm/L & allow to Dry for 4-6 Hours (2) Apply two Neat Coat of Damp Proof Ultra Fibre reinforced lquid layer without dilution by brush or roller at a time interval 4-6 Hours of Priming Coat

M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work

M&L for Two coats of oil emulsion distempering white or tinted , over & including 1.5mm thick wall care putty on Wall after sand paper gentle rubbing to obtain smooth surfaces including all necessary arrangement for execution of work .Complete all as specified .

M&L for applying two coats of cement base paint over with using hand roller complete all as specified

M&L for applying two coats of exterior emulsion paint (weather proof anti algae) 100% acrylic emulsion paint complete all as specified

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified

All as per Srl item No 19 here in above but applying one coat of distemper oil emulsion using hand roller white or tinted on ceiling complete all as specified

M & L Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of old surface including all preparatory work complete all as specified.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of old surface including all preparatory work complete all as specified

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified

Taking down shutter of any description area exc 1 sqm and n. exc 2 sqm complete all as specified

Rescuring without taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) Complete all as specified

S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tube complete all as specified

Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown in SSR 2020 (Part-II)

S&F 35 mm thick 2nd class hardwood factory made plain framed, panelled shutters (any No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces rail & stiles as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified

S&F 35 mm thick 2nd class hardwood factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified

S&F for 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified

M&L for rolled mild steel framed work such as grill grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors , laddres, door gate frame, framed baliusters, walk ways, railing , frame work of water tank and similar work conforming to Fe-290, Gde-E-165 complete all as specified

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position complete all as specified

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified

S&F 150 mm long mild steel barrel tower bolts stove enameled black with bright bolt (ISI marked) complete all as specified

Mild steel pressed steel bow handle oval type stove enameled black of size 150 mm (ISI marked) complete all as specified

S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed.

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked .

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified

S&F for Factory made steel window with side hung shutteers including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded(Note :- Glass, wire cloth shall be measured and paid separately under respective items)

All as per item No 42 above but without glazing bars.

M&L dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) , removing serviceable tiles to store and rubbish off the premises all as specified.

M&L Glazed ceramic Tiles,in verticle surface 350X250X7mm/ 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match the existing surface over and including 15mm thick rendering in CM 1:4 complete all as specified

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick in floor (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick screed bed in CM 1:4 complete all as specified

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) as in sub-base of florring complete all as specified.

M&L Non - skid Ceramic colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Machine cut kota stone slab 12-15 mm thick in riser of steps, skirting, dedo and pillar laid over over and including cement screed 15 mm thick in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Dismantling of Stone/RCC Jali & Pillar of any description , any thickness complete all as specified.

M&L for 30 mm thick Sikandra stone jali decorative design of approved pattern by Eng-in-charge including all carving and moulding of corners fixed in cement mortar 1:4 to grooves of stone pillars application with colouring to match with colour of jali including fixing of stone jali for all corners & lift complete all as specified.

S&F stone pillars(post) of size 100x100 mm including engraving decorative design of approved pattern on two face and dome shape approved by GE , height of each post as per sikandra stone jali, ,making groove on two face of size 43x5 mm for fixing of sikandra Jali in CM 1:4 complete all as specified.

S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified.

S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as spcfd & as directed .

S&F in repair bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore, complete all as specified.

S&F pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified.

S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified.

S&F in repair chromium plated15mm bore dia stop valve/Angle valve cast copper alloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high level 32mm dia complete all as specified.

M&L 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve including dismantling existing tank Complete all as specified

M&L new 1000 ltr ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve including dismantling existing tank Complete all as specified

taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore

20 mm bore

S&F in repair for Corner Glass Shelf (with Bracket Complete all as specified (Make;- Jaquar cat part no ACN-1173 or eqv in Parryware , Hindware )

S&F in repair Glass Shelf 550mm long complete all as specified (Make;- Jaquar cat part no AQN-7771

S&F in repair 25mm dia S.S Pipe curtain Rod with nickel plated brackets & Decorative end cap Complete all as specified

S&F in repair stainless steel kitchen plate rack made of 1mm thick SS Steel of size 24"X26"X10" fixed with nails/screw on wall complete all as specfd & directed by Eng-In-Charge

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 including Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles including complete all as specified.

Cleaning and removing all scales and dirt,etc,from tanks & from mouths of circulating pipes etc, capacity of tank exc 250 ltr but not exc 500 ltr including disconnecting existing tank for cleaning it complete all as specified.

All as per item NO 71 above but exc 500 ltr & not exc1000 ltr capacity

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type complete all as specified.

M&L for pcc type B-0 (1:2:4) ( using 12.5mm graded aggregates) in roof covering , benching , etc 40 mm thick finished cement concrete surface even & smooth without using extra cement complete all as specified.

M&L for screed bed or bedding layer of 15 mm thick cement mortar 1:4, for floor finished even & smooth without using extra cement complete all as specified & directed (mixed with WPC ) (Note :- WPC shall be supplied & paid seprately)

Supply only water proofing compound ISI marked

M&L for Preparing surface for roof treatment by removing all looase gravel ,dirt ,oil & foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application ,provide 75X75mm coving made out of PMC mortar as above on all joints of vertical up stands to ensure does not exceed 5% immediately before application of liquid membrane material incorporation & protection to be provided ,applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm with 1st coat appllied in water ratio (ratio elastomeric liquid water proofing membrane :water will be 3:1) as primer, after the 1st coat is completly dry becomes slightly darker than apply 2nd coat with undiluted elastomeric water proofing liquid in criss -cross direction with roller .spread glass fibre mesh reinforcement of 1mm thickness with overlap of 50mm in both direction when the surface is still tacky . After the drying of of 2nd coat completly apply the final coat of undiluted elastomeric water proofing liquid in a direction parpendicular to previous coat .the min. thickness of dry film of complete application should not be less than the as recommanded by manufacture. the overall dry thickness should not be in any case less than 1.5mm complete all as specified

M&L for writing letters or figures (Block, Roman, Italic or Indian ) n.exc. 30cm high with thick synthetic enamel paint all as specified and directed by Engineer-in-charge.

M/S MAMTA CONSTRUCTIONS

Captainkomalchaharconstructions

abhinav and company

B R ENTERPRISES

PD GUPTA AND COMPANY