Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-AOC A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹7.0 L+₹27,943 (4.18%)Rejected-Finance GP KIZHAKKAMBALAM KOLENCHERY | THRISSUR | KERALA | 680667 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹7.5 L+₹78,443 (11.7%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
18 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL DHANU KUMAR RAI
GARRISON ENGINEER DAMAN TAT RAKSHAK VIHAR DALWADA NANI DAMAN POST DAMAN (UT) PIN 396210
REPAIRS TO FENCING, GATE, DRAIN AND HARDSTANDING AND OTHER B/R ALLIED WORKS AT ICGAS DAMAN
2022_MES_569388_1
8656/E8
Open Tender
Civil Works
Item Rate
180 days
ICGAS DAMAN
Class E and Category a(i)
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER DAMAN
₹18,000
11 Feb 2023
15 Dec 2022
21 Jan 2023
15 Dec 2022
18 Jan 2023
30 Dec 2022
Amount
Dismantling posts or struts (wood, steel or R.C.C.) any section,post embedded in concrete, brick work masonry etc complete all as specified and as directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out soft/loose soil complete all as specified and as directed.
M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
S&F mild steel grade FE-290 Gde E-165 Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, etc complete all as specified and as directed.
S&F in repairs Galvanized chain link fencing of size 50mm x 50mm x 3mm PVC coated, weight not less than 2.18kg/Sqm fixed to posts/strut with bolts and nuts complete all as specified and as directed(Note- Nuts and bolts shall be measured seperately.)
M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165)complete all as specified and as directed.
S&F for 11 to 15 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt not exceeding 5 cm long complete all as specified and as directed.
M&L for refixing serviceable flat iron of any section and not exceding 2.4m each as retrieved from old fencing by cutting into shape, drilling holes, notching for wire with required number of holes etc complete all as specified and as directed.
M&L for refixing serviceable 10mm dia MS round bar retrieved from old fencing by cutting into shape, bending and fixing to chainlink fencing etc complete all as specified and as directed.
M&L for cement concrete 1:4:8 Type D-2 (40 mm graded coarse stone aggregate) 75 mm thick as in sub base etc complete including demolition of plain cement concrete and pavings (unreinforced) in any position (below or above ground level) not exceeding 15 cm thick and removal of the same outside MD land etc complete all as specified and as directed.
M&L 75 mm thick Plain Cement concrete type C-1 1:3:6 (40mm graded coarse stone aggregate) as in plinth protection etc complete including demolition of plain cement concrete and pavings (unreinforced) in any position (below or above ground level) not exceeding 15 cm thick and removal of the same outside MD land etc complete all as specified and directed.
M&L forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and as directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 including placing/fixing PVC (SWR) pipes of any dia as weep holes etc complete including demolition of brick / stone masonry works /concrete work built in cement mortar etc complete all as specified and as directed. (Note:- PVC (SWR) pipe shall be measured under and paid seperately under relevant item.)
Supply only PVC (SWR) pipes, single socketed, in any length , with rubber rings 110mm dia in any length with rubber ring joints, laid/placed/fixed as in weep holes etc complete all as specified and as directed.
M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm (Granite or Trap stone)complete all as specified and as directed.
M&L for flush pointing to random rubble masonry, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed.
M&L for cement concrete as in road kerbs or copings and the like of Type B1, 1:2:4 (using 20mm graded stone aggregate) round or chamfered on edge including necessary use and waste of formwork complete all as specified and as directed..
M&L for framed work such as grills, gratings, etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Gde E-165 etc including dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.
S & F in repairs, Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of ancolour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.
S&F in repairs, 1.25 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) etc complete all as specified and as directed.
M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
M&L for preparation of new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer etc complete all as specified and as directed.
M&L for preparation of new steel surfaces by applying two coats synthetic enamel paint over a coat of red oxide primer not exceeding 10cm in width or girth etc complete all as specified and as directed.
M&L for burnt brick using old sized sub class 'B' bricks straight or curved on plan exceeding 6m mean radius and built in CM 1:4 etc complete including demolition of brick / stone masonry works /concrete work built in cement mortar etc complete all as specified as directed.
M&L for rendering in CM 1:4, 15 mm thick on brick/concrete surfaces and finishing the surface even and fair complete all as specified and as directed.
M&L for newly plastered wall surfaces including chajjahs, parapets and applying two coat of weather proof Acrylic Exterior Emulsion over a coat of primer including making good surfaces complete all as specified and as directed.
M&L for precast reinforced cement concrete 1:2:4 type B-1 (20 mm graded coarse stone aggregate) as in manhole/drain cover slabs etc set in CM 1:4 including use and waste of formwork and finishing top surface of cover slab even and smooth using extra cement etc complete including demolition of old slabs from its position and removing the material out side MD land complete all as specified and as directed. (Note : Steel reinforcement and formwork shall be measured and paid separately)
M&L RCC nominal mix 1:2:4, Type B-1 (using 20 mm graded coarse stone aggregate) as in chajjas complete including demolition of old from its position and removing the material out side MD land complete all as specified and as directed.
M&L formwork rough finished surfaces of flat concrete to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and as directed.
M&L Mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.
M&L chequered cement concrete tiles of size 20cmx20cm x25mm thick , set and jointed in neat cement slurry and pointed with grey cement and no pigments to match with and including 15 mm thick cement mortar screed bed in cement mortar 1:6 complete including dismantiling floor hearth/wall tiling/skirting/dado etc including cement mortar bedding (but not backing) and removing rubbish out off the premises complete all as specified and as directed.
M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment over and including 50mm thick crushed stone sand filling including dismantling stone sett / interlocking paver tiles of any description or thickness laid dry or laid dry and pointed complete all as specified and as directed.
M & L for water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge :- (a) Removing existing water proofing treatment to complete any descrption, thickness and in any position including removal of rubbish of the premises etc complete all as directed by Engineer-in-charge. . (b) 10 mm thick cement plaster in CM 1:3 with integral WPC 2% by weight of cement, to be laid over the RCC roof slab when the concrete is green. . (c) Providing and laying 3mm thick APP ( Actatic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6Kg/Sqm water proofing membrane black finished, reinforced with non woven polyster matt make as approved including a coat of oil bound bitumen primer @ 0.4 Ltr / sqm by the same membrane manufacturer of density 0.87 - 0.89 kg/ltr at 25 degree centigrade and viscosity 70-160 cps over the coat, 3mm thick 5 layered APP membrane shall be laid using butane torch and sealing all joints etc after the surface complete as per standard practice as per manufacturers instruction. The vital physical and chemical parameters of the membrane shall be as under:- (i) Joint strength in longitudinal and transverse direction at 23 degree centigrade as 650/450N/5Cms (ii) Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150 degree centigrade. Cold flexibility upto 20 degree centigrade when tested in accordance with ASTM ( D05147) (iii) The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane only and 100mm side overlap and 150mm end lap, all as specifified and as directed. (d) Apply two coats of bitumastic- aluminium paint @0.12 Kg/Sqm over the membrane.
Supply only integral waterproofing compound ISI marked all as specified.
vijay constructions
Nakshatra Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .