PERIODICAL SERVICES TO SIG COY, 1K STN AND ECHH AREA AT JALAPAHAR UNDER AGE (I) DARJEELING

Amount

M&L for preparation of old decorated surfaces of walls and applying two coats of white wash, complete as specified and as directed by Engineer-in-charge.

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash, complete as specified and as directed by Engineer-in-charge.

M&L preparing of old decorated surfaces of walls and applying two coats of distemper oil-emulsion, complete as specified and as directed by Engineer-in-charge.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer & putty (1mm thick) to wall surfaces including preparation of old surface of wall, complete as specified and as directed by Engineer-in-charge.

M&L for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss, efflorescent and trading oil and greasy spots and applying one coat of cement base paint (white or tinned), complete as specified and as directed by Engineer-in-charge.

M&L for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss, efflorescent and trading oil and greasy spots and applying two coats of cement base paint (white or tinned), complete as specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge.

M&L for 15mm thick in two layer (10 mm and 5 mm thick) rendering on fair faces of brick work or concrete surface in CM 1:4, mixing with water proofing compound @ 3% by weight of cement consumed and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.

M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces and surface finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge.

M&L for two coats of oil bound distemper over a coat of primer & putty (1 mm thick) on newly plastered wall surfaces including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of finishing walls with two coats of Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm, complete all as specified and as directed by Engineer-in-charge.

M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coats of weather coat (exterior grade) over a coat of alkali resistant primer, complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge.

Material and labour for scrapping and removing of old paint, stain loose material and algae, fungus growth through mechanical scrapper then cleaning of surfaces with water using with high pressure Jet Washer then fill the cracks with acrylic base elastomeric component with polymer mortar met out of SBR Latex @ 0.10 ltr / Sqm. (Super Plasticizer / Cement Mix Plus / Repairo the ready-mix plaster) and application of 1 (one) coat of external primer (Seal-O-Prime) @ 2.20 Ltr / 10 Sqm and 2 (two) coats of Exterior Emulsion paint (Premium acrylic emulsion with added silicon) @ 1.43 Ltr /10 Sqm through mechanized tools i.e. Airless Sprayer, complete all as specified and as directed by Engineer-in-charge.

M&L for surface preparation of interior area filling the cracks up to 5mm with Crack Fill Past (An elastomeric paste) and patch putty with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having dia 7"-9") including cleaning, etc. to make the surface free from dust, loose paint. Applying 1 coat of water primer followed by 2 Coats of Acrylic Emulsion by using auto roller, complete all as specified and as directed by Engineer-in-charge.

THUKKEPA & PANGDOK (BID ID -3348705)

Darjeeling Enterprises (BID ID -3349895)

BHASKAR PRADHAN (BID ID -3348917)

Damdoo Bhutia (BID ID -3348863)

BIMAL BHATTRAI (BID ID -3350101)

JALAPAHAR HARDWARE (BID ID -3347952)

REEMA TAMANG AND SONS (BID ID -3350252)